{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"用过氧化二异丙苯（DCP）引发丁二酸丁二醇酯（PBS）部分交联反应来改性其抗<span style=\"color:red\">撕裂</span>性。结果表明,PBS的凝胶含量随DCP含量增加,当DCP的质量分数达0.6%时,凝胶量达到了13.1%。纯PBS和部分交联PBS受热出现双熔融峰,分别对应原始片晶熔融和再结晶增厚片晶熔融;交联后结晶度减小、晶粒较小造成吸热峰也变小;峰位向低温偏移。在一定范围内,交联度增大,纵横向的屈服、断裂的强度及伸长率随之增大;0.6%DCP交联PBS膜的薄膜横向<span style=\"color:red\">撕裂</span>强度由298.5 N/mm增大到407.5 N/mm,提高36.5%;纵向<span style=\"color:red\">撕裂</span>强度提高29%。交联后PBS的延展性变好,不会轻易断裂","authors":[{"authorName":"孙重晓","id":"3c14b611-0b90-47e9-8b3f-e06bb1197355","originalAuthorName":"孙重晓"},{"authorName":"王克俭","id":"649f0012-eef3-4008-a236-98bc729e3164","originalAuthorName":"王克俭"},{"authorName":"季君晖","id":"b012cb37-1c62-4614-99ce-1d23a7d4dee0","originalAuthorName":"季君晖"},{"authorName":"程明","id":"f96f93c8-f7d6-4b52-81a4-00e2ae688793","originalAuthorName":"程明"}],"doi":"","fpage":"78","id":"02e365ac-3962-40a0-bf73-c49ec3c378ca","issue":"10","journal":{"abbrevTitle":"GFZCLKXYGC","coverImgSrc":"journal/img/cover/GFZCLKXYGC.jpg","id":"31","issnPpub":"1000-7555","publisherId":"GFZCLKXYGC","title":"高分子材料科学与工程"},"keywords":[{"id":"5c1637f6-53e9-4efc-81da-7f5db601d776","keyword":"聚丁二酸丁二醇酯","originalKeyword":"聚丁二酸丁二醇酯"},{"id":"e51aaf9d-c106-4bcf-b4b5-4607cbada51a","keyword":"过氧化二异丙苯","originalKeyword":"过氧化二异丙苯"},{"id":"ac6cd85f-5064-40b0-a937-edc8a3e7f056","keyword":"<span style=\"color:red\">耐</span><span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>","originalKeyword":"耐撕裂性能"}],"language":"zh","publisherId":"gfzclkxygc201110025","title":"过氧化物交联改性聚丁二酸丁二醇酯薄膜的抗<span style=\"color:red\">撕裂</span>性","volume":"27","year":"2011"},{"abstractinfo":"针对管线钢的落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>问题,对比了落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>差别较大的实验材料的显微组织,并从夹杂物百分比、分布、成分角度分析了夹杂物对落锤<span style=\"color:red\">性能</span>的影响,分析了M/A岛对落锤<span style=\"color:red\">性能</span>的影响,观察并分析了位错、析出物的分布以及强化机制.结果表明,当组织中有适量的多边形铁素体,较少量的粒状贝氏体,夹杂物较少且分布均匀,趋向于球形,M/A岛弥散细小,不连接成链状,析出物尺寸细小,且分布弥散时,实验材料具有良好的落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>.","authors":[{"authorName":"周民","id":"f351d352-7b10-4b6c-b721-32ff92bb3bdb","originalAuthorName":"周民"},{"authorName":"杜林秀","id":"a51ee73c-8da1-457b-afa9-04ec8ebda4a6","originalAuthorName":"杜林秀"},{"authorName":"衣海龙","id":"5de05356-280f-4709-871f-37fddc461d4f","originalAuthorName":"衣海龙"},{"authorName":"刘相华","id":"8a244061-8e79-48f3-894b-1e7463c43571","originalAuthorName":"刘相华"}],"doi":"","fpage":"33","id":"d52f3881-01c4-4d4d-9eb5-0ac946f8949b","issue":"9","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"aa712b2d-40e4-4134-846b-4aa966182e61","keyword":"针状铁素体","originalKeyword":"针状铁素体"},{"id":"134f5d37-e7b0-4205-af89-2ec5923ba9ad","keyword":"夹杂物","originalKeyword":"夹杂物"},{"id":"5c933d73-4d54-469c-bb10-c7f5f9811fb9","keyword":"M/A岛","originalKeyword":"M/A岛"}],"language":"zh","publisherId":"gtyjxb200909008","title":"X80管线钢落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>的影响因素分析","volume":"21","year":"2009"},{"abstractinfo":"材料技术的不断更新和发展对传统测试技术提出了新的要求和挑战,尤其对于某些测试结果指标开始提出质疑.本文主要探讨关于测试钢材断裂韧性的问题,尤其关注于配备高端研究模型的落锤<span style=\"color:red\">撕裂</span>试样断裂<span style=\"color:red\">性能</span>实验设备的使用问题.","authors":[{"authorName":"尼克·奥斯博恩","id":"aa5633e0-f588-4f60-bd7b-f665ddb3b7b4","originalAuthorName":"尼克·奥斯博恩"}],"doi":"","fpage":"26","id":"84b97287-8752-4e23-9e4f-d90dee0c388d","issue":"6","journal":{"abbrevTitle":"WLCS","coverImgSrc":"journal/img/cover/WLCS.jpg","id":"64","issnPpub":"1001-0777","publisherId":"WLCS","title":"物理测试"},"keywords":[{"id":"1779bd9f-05a3-4931-b299-eee9b23add23","keyword":"管线钢","originalKeyword":"管线钢"},{"id":"b74005b2-2e0e-49a3-892f-a523f922a0c2","keyword":"<span style=\"color:red\">性能</span>","originalKeyword":"性能"},{"id":"bac8b0a4-b29b-421a-94c9-efbd6466143f","keyword":"落锤<span style=\"color:red\">撕裂</span>实验","originalKeyword":"落锤撕裂实验"},{"id":"9c739aba-e84f-46ff-8758-4079f83ffda4","keyword":"设备","originalKeyword":"设备"}],"language":"zh","publisherId":"wlcs200806007","title":"配有高端研究模型的落锤<span style=\"color:red\">撕裂</span>试样断裂<span style=\"color:red\">性能</span>试验(DWTT)","volume":"26","year":"2008"},{"abstractinfo":"材料技术的不断更新和发展对传统测试技术提出了新的要求和挑战，尤其对于某些测试结果指标开始提出质疑。本文主要探讨关于测试钢材断裂韧性的问题，尤其关注于配备高端研究模型的落锤<span style=\"color:red\">撕裂</span>试样断裂<span style=\"color:red\">性能</span>实验设备的使用问题。","authors":[{"authorName":"尼克·奥斯博恩","id":"7f22fcb4-30ff-4a25-b5f0-33113418334f","originalAuthorName":"尼克·奥斯博恩"}],"categoryName":"|","doi":"","fpage":"26","id":"a2a349c9-cf18-460c-a091-47594b24b1fa","issue":"6","journal":{"abbrevTitle":"WLCS","coverImgSrc":"journal/img/cover/WLCS.jpg","id":"64","issnPpub":"1001-0777","publisherId":"WLCS","title":"物理测试"},"keywords":[{"id":"db71a50e-2fb9-4b27-bb18-fe4a44c906f7","keyword":"管线钢","originalKeyword":"管线钢"},{"id":"34372548-90f7-463a-82f0-46d798f99ed7","keyword":"property","originalKeyword":"property"},{"id":"82f61961-c10a-48dc-8894-41de1fbabd9d","keyword":"DWTT","originalKeyword":"DWTT"},{"id":"5570958f-8db2-4078-a056-e6d0964ef4f4","keyword":"equipment","originalKeyword":"equipment"}],"language":"zh","publisherId":"1001-0777_2008_6_4","title":"配有高端研究模型的落锤<span style=\"color:red\">撕裂</span>试样断裂<span style=\"color:red\">性能</span>试验（DWTT）","volume":"26","year":"2008"},{"abstractinfo":"研究了不同类型的显微组织的落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>，并从夹杂物百分比以及分布角度分析了夹杂物对落锤<span style=\"color:red\">性能</span>的影响，并给出了典型硅酸盐类夹杂和硫化物、氧化物夹杂的扫描照片，利用lapera试剂腐蚀出M/A岛的形貌，分析了M/A岛对落锤<span style=\"color:red\">性能</span>的影响，以及析出物位错、析出物的强化机制。","authors":[{"authorName":"周民","id":"b745128b-a29c-4257-980a-6a34fea25f31","originalAuthorName":"周民"}],"categoryName":"|","doi":"","fpage":"33","id":"a784d8cc-6aa3-41e2-a015-2a446f1b42e2","issue":"9","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"c89c13fd-8045-47b3-b4d9-968e510570d7","keyword":"针状铁素体;夹杂物;M/A岛","originalKeyword":"针状铁素体;夹杂物;M/A岛"}],"language":"zh","publisherId":"1001-0963_2009_9_12","title":"X80管线钢落锤<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>的影响因素分析","volume":"21","year":"2009"},{"abstractinfo":"采用不同过热度浇注了连铸坯,轧制了70 mm的Q345GJZ15厚钢板.为研究连铸过热度对厚钢板抗层状<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>的影响,通过拉伸试验机对钢板Z向拉伸试样进行了检测,应用金相显微镜、扫描电镜和能谱分析仪对拉伸断口形貌、组织和成分进行了分析.结果表明:在一定拉速下,过热度高,连铸坯中心偏析严重,等轴晶比例少,钢板抗层状<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>差.连铸坯中心偏析经轧制不能完全消除,含Nb、Ti的碳化物和MnS等夹杂在中心聚集,并形成贝氏体和马氏体组织,是造成厚钢板Z向拉伸脆断的主要原因.","authors":[{"authorName":"余宏伟","id":"37091431-5d34-470c-bf3c-a81f6102f83f","originalAuthorName":"余宏伟"},{"authorName":"汪菊华","id":"6abd576a-e4e9-4967-bcf4-49c2054a9806","originalAuthorName":"汪菊华"},{"authorName":"李德发","id":"d7eb24a0-b2a5-4e87-8588-d9b3f4cde5bb","originalAuthorName":"李德发"},{"authorName":"易勋","id":"0c5a3a99-bf58-4ded-a36d-b42784f5120d","originalAuthorName":"易勋"}],"doi":"","fpage":"41","id":"e57cf8d2-e558-458e-869c-8898d70474c0","issue":"6","journal":{"abbrevTitle":"WLCS","coverImgSrc":"journal/img/cover/WLCS.jpg","id":"64","issnPpub":"1001-0777","publisherId":"WLCS","title":"物理测试"},"keywords":[{"id":"b47efe04-4358-4586-ad99-8538360d52cf","keyword":"抗层状<span style=\"color:red\">撕裂</span>","originalKeyword":"抗层状撕裂"},{"id":"2d13683a-dc36-4232-9744-cbe50638ac6c","keyword":"过热度","originalKeyword":"过热度"},{"id":"2391ecc9-bb5f-458c-9a36-3d74b41bd1e9","keyword":"连铸坯","originalKeyword":"连铸坯"},{"id":"8601b16b-6a28-48c4-bf64-ba6220ad8951","keyword":"厚钢板","originalKeyword":"厚钢板"},{"id":"94a81752-d593-46e3-b7f5-4014551573e7","keyword":"中心偏析","originalKeyword":"中心偏析"}],"language":"zh","publisherId":"wlcs201306011","title":"不同连铸过热度厚钢板的抗层状<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>","volume":"31","year":"2013"},{"abstractinfo":"以玻璃纤维多轴向经编针织物为增强体,以环氧树脂为基体,将玻璃短纤维添加到玻纤织物增强体层之间,制备层间含有玻璃短纤维的多层多轴向经编复合材料.利用万能力学材料试验机对复合材料的层间<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>进行测试和电镜扫描,对<span style=\"color:red\">撕裂</span>后的复合材料层间形态进行了观察,研究了玻璃短纤维对复合材料层间<span style=\"color:red\">性能</span>的影响.结果表明,玻璃短纤维增韧处理的复合材料层间<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>明显增强,载荷-位移曲线初始斜率大,复合材料不易被以<span style=\"color:red\">撕裂</span>形式为主的载荷破坏.","authors":[{"authorName":"聂小林","id":"da682a07-1a65-4991-9c02-0872a51aeb6f","originalAuthorName":"聂小林"},{"authorName":"马丕波","id":"3aac18e3-e1d5-45a4-aac6-7162bb221f14","originalAuthorName":"马丕波"},{"authorName":"王亚柏","id":"3773e49c-0311-4909-b532-053f5c74b718","originalAuthorName":"王亚柏"}],"doi":"","fpage":"57","id":"395b8676-96a9-48c7-8ed4-400099e030c6","issue":"5","journal":{"abbrevTitle":"BLGFHCL","coverImgSrc":"journal/img/cover/BLGFHCL.jpg","id":"6","issnPpub":"1003-0999","publisherId":"BLGFHCL","title":"玻璃钢/复合材料"},"keywords":[{"id":"6a899ac9-fbd8-4f2b-b999-26afc38b0bac","keyword":"玻璃纤维","originalKeyword":"玻璃纤维"},{"id":"73c88747-c536-4fca-aa93-8a303ae03e83","keyword":"经编轴向织物","originalKeyword":"经编轴向织物"},{"id":"ce6b3263-da6d-4b73-9460-3281ab0ae7cb","keyword":"复合材料","originalKeyword":"复合材料"},{"id":"35a073ef-81dd-48e8-9558-3b67a98afe8f","keyword":"<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>","originalKeyword":"撕裂性能"},{"id":"f6905b88-8c90-4320-a304-526895e8099d","keyword":"界面<span style=\"color:red\">性能</span>","originalKeyword":"界面性能"}],"language":"zh","publisherId":"blgfhcl201705010","title":"玻璃短纤维对多层多轴向经编复合材料层间<span style=\"color:red\">撕裂</span><span style=\"color:red\">性能</span>影响","volume":"","year":"2017"},{"abstractinfo":"介绍宝钢开发研制的一种屈服强度为355MPa级的抗层状<span style=\"color:red\">撕裂</span>钢板,该钢种是一种细晶粒微合金化的焊接结构用厚钢板,具有优良的抗层状<span style=\"color:red\">撕裂</span>能力、高的低温冲击韧性和好的疲劳<span style=\"color:red\">性能</span>.该产品已应用于上海徐浦大桥.","authors":[{"authorName":"郑磊","id":"0c3ebbca-cc00-4d52-ad7a-3f0d3515489a","originalAuthorName":"郑磊"}],"doi":"10.3969/j.issn.1001-7208.2005.02.002","fpage":"4","id":"7bc636d8-722c-4547-9709-df353f24e30f","issue":"2","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"a480c9ac-0606-4df3-a5ab-0d96a74c24d1","keyword":"层状<span style=\"color:red\">撕裂</span>","originalKeyword":"层状撕裂"},{"id":"2d4d231d-bfc7-47a5-b1c0-101c5efde72f","keyword":"厚钢板","originalKeyword":"厚钢板"},{"id":"3f9c9454-35cf-4c40-9b7c-82c483ac6be2","keyword":"Z向<span style=\"color:red\">性能</span>","originalKeyword":"Z向性能"}],"language":"zh","publisherId":"shjs200502002","title":"抗层状<span style=\"color:red\">撕裂</span>钢的开发与应用","volume":"27","year":"2005"},{"abstractinfo":"考察了溴系阻燃剂、磷氮系阻燃剂对聚对苯二甲酸丁二醇酯（ PBT）力学<span style=\"color:red\">性能</span>、<span style=\"color:red\">耐</span>光老化<span style=\"color:red\">性能</span>的影响，还研究了酸吸收剂对阻燃PBT材料的力学<span style=\"color:red\">性能</span>、紫外线稳定性的影响。结果表明，钙锌稳定剂能提高卤系阻燃材料的<span style=\"color:red\">耐</span>侯<span style=\"color:red\">性能</span>，无卤阻燃PBT的<span style=\"color:red\">耐</span>侯<span style=\"color:red\">性能</span>优于卤系阻燃PBT（1000h，△E≤3）。","authors":[{"authorName":"雷祖碧","id":"00a1cab2-4bbd-45fa-b17a-513fbb28d092","originalAuthorName":"雷祖碧"},{"authorName":"马玫","id":"666a78eb-9b67-43bc-8b33-b59420fce132","originalAuthorName":"马玫"},{"authorName":"王浩江","id":"f47e9637-622d-4c0b-8075-5a4a68587d23","originalAuthorName":"王浩江"}],"doi":"","fpage":"17","id":"a959af60-59c9-4b7c-9ef6-1403de874d72","issue":"6","journal":{"abbrevTitle":"HCCLLHYYY","coverImgSrc":"journal/img/cover/HCCLLHYYY.jpg","id":"42","issnPpub":"1671-5381","publisherId":"HCCLLHYYY","title":"合成材料老化与应用"},"keywords":[{"id":"bc663191-7340-400c-860a-43d43ec6e07d","keyword":"聚对苯二甲酸丁二醇酯","originalKeyword":"聚对苯二甲酸丁二醇酯"},{"id":"4b175492-4f78-4f82-afed-be0501075c3c","keyword":"含卤阻燃","originalKeyword":"含卤阻燃"},{"id":"83336bef-1af6-4ed0-a481-ff7377c73ff9","keyword":"无卤阻燃","originalKeyword":"无卤阻燃"},{"id":"3f5ef1d4-44d7-4136-8898-675cd88b5f69","keyword":"酸吸收剂","originalKeyword":"酸吸收剂"},{"id":"cee614cd-f662-41c5-80b9-fad93f529802","keyword":"钙锌复合稳定剂","originalKeyword":"钙锌复合稳定剂"}],"language":"zh","publisherId":"hccllhyyy201306006","title":"阻燃 PBT 的<span style=\"color:red\">耐</span>侯<span style=\"color:red\">性能</span>研究","volume":"","year":"2013"},{"abstractinfo":"为了确定<span style=\"color:red\">耐</span>电晕漆膜厚度对漆包线漆<span style=\"color:red\">性能</span>的影响,研究了<span style=\"color:red\">耐</span>电晕漆包线漆组分一定,涂漆方案不同的<span style=\"color:red\">耐</span>电晕漆包线附着力和<span style=\"color:red\">耐</span>电晕<span style=\"color:red\">性能</span>.结果表明:对于φ1.25 mm三涂层2级漆膜厚度的漆包线而言,底漆厚度0.02mm、<span style=\"color:red\">耐</span>电晕漆厚度在0.05mm以上时,漆包线的综合<span style=\"color:red\">性能</span>可达到国家标准.","authors":[{"authorName":"唐文进","id":"be050a4a-039b-434e-ac79-1c610a5ec482","originalAuthorName":"唐文进"},{"authorName":"王文进","id":"580b3500-75e7-4c48-b55a-11979cdc046c","originalAuthorName":"王文进"},{"authorName":"李鸿岩","id":"5c5fa51b-48a3-4d7e-b5d9-a4da18ccffc2","originalAuthorName":"李鸿岩"},{"authorName":"袁立强","id":"0381900d-df96-459c-8698-b86e6bf85b02","originalAuthorName":"袁立强"},{"authorName":"姜其斌","id":"dcfcb6fd-bb08-4487-ad89-b882d8ebf9fc","originalAuthorName":"姜其斌"}],"doi":"10.3969/j.issn.1009-9239.2010.04.012","fpage":"45","id":"9dc457f5-e751-4d86-8475-52a53762d5e0","issue":"4","journal":{"abbrevTitle":"JYCL","coverImgSrc":"journal/img/cover/JYCL.jpg","id":"50","issnPpub":"1009-9239","publisherId":"JYCL","title":"绝缘材料"},"keywords":[{"id":"840c56c1-8b62-4193-943a-c81275a929e8","keyword":"<span style=\"color:red\">耐</span>电晕","originalKeyword":"耐电晕"},{"id":"feffe9b2-ec11-43b5-85fa-543beb7fed2e","keyword":"漆包线","originalKeyword":"漆包线"},{"id":"34acd6ae-8979-4b8a-8d8e-5a72ad47ce9f","keyword":"绝缘","originalKeyword":"绝缘"}],"language":"zh","publisherId":"jycltx201004012","title":"<span style=\"color:red\">耐</span>电晕涂层厚度对漆包线<span style=\"color:red\">耐</span>电晕<span style=\"color:red\">性能</span>的影响","volume":"43","year":"2010"}],"totalpage":8769,"totalrecord":87682}