The effects of Sc content on the mechanical properties of Al-Sc alloys were investigated. The results show that the strengths of all the tested alloys with 0.1 wt.%, 0,3 wt.%, and 0.4 wt.% Sc additions increase initially with an increase in annealing time, due to the increase in volume fraction and size and the decrease in particle interspacing of Al3Sc particles. After reaching peak values, the strengths of all the tested alloys start to decrease with increasing annealing time due to the coarsening and increase in particle interspacing of Al3Sc particles. It has also been shown that the alloy with 0.3 wt.% Sc has a higher strength and a lower elongation than the alloys with 0.1 wt.% and 0.4 wt.% Sc. The in-crease in strength and the decrease in elongation of the alloy with 0.3 wt.% Sc are due to the smaller particle interspacing of Al3Sc particles,resulting in a strong inhibition of dislocation movement during deformation.
参考文献
| [1] | Kramer L.S;Tack W.T;Fernandes M.T .Scandium in aluminum alloys[J].Advanced Materials & Processes,1997,152(04):23. |
| [2] | A.F.Norman;P.B.Prangnell;R.S.Mcewen .The solidification behaviour or dilute aluminium-scandium alloys[J].Acta materialia,1998(16):5715-5732. |
| [3] | Tarnacki J;Kim Y.W .Investigation of as-cast and rapidly solidified Al3Sc[J].Scripta Metallurgica,1989,23(07):1063. |
| [4] | E. A. MARQUIS;D. N. SEIDMAN .NANOSCALE STRUCTURAL EVOLUTION OF Al_3Sc PRECIPITATES IN Al(Sc) ALLOYS[J].Acta materialia,2001(11):1909-1919. |
| [5] | Nembach E.Particle Strengthening of Metals and Alloys[M].New York:John Wiley and Sons,Inc,1997:62. |
| [6] | K. Venkateswarlu;L.C. Pathak;A.K. Ray .Microstructure, tensile strength and wear behaviour of Al-Sc alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(2):374-380. |
| [7] | Rostova T.D;Davydov V.G;Yelagin V.I;Zakharov V.V .Effect of scandium on recrystallization of aluminum and its alloys[J].Materials Science Forum,2000,331:793. |
| [8] | Riddle Y.W;Sanders T.H.Jr .Contribution to Al3Sc to recrystallization resistance in wrought Al-Sc alloys[J].Materials Science Forum,2000,331:939. |
| [9] | S. Lathabai;P.G. Lloyd .The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy[J].Acta materialia,2002(17):4275-4292. |
| [10] | Yu K;Li W;Li S;Zhao J .Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc,Zr)phases[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,368(1-2):88. |
| [11] | Singh V;Prasad K.S;Gokhale A.A .Effect of minor Sc addition on structure,age hardening and tensile properties of aluminum alloy AA8090 plate[J].Scripta Materialia,2004,50(06):903. |
| [12] | Shogo Komura;Zenji Horita .Influence of scandium on superplastic ductilities in an Al-Mg-Sc alloy[J].Journal of Materials Research,2000(11):2571-2576. |
| [13] | F. Musin;R. Kaibyshev;Y. Motohashi .High strain rate superplasticity in a commercial Al-Mg-Sc alloy[J].Scripta materialia,2004(4):511-516. |
| [14] | Sawtell R.R;Jensen C.L .Mechanical properties and microstructutes of Al-Mg-Sc alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21(02):421. |
| [15] | Emmanuelle A. Marquis;David N. Seidman;David C. Dunand .Effect of Mg addition on the creep and yield behavior of an Al-Sc alloy[J].Acta materialia,2003(16):4751-4760. |
| [16] | Hirsch P.B;Humphreys F.J.The Physics and Strength of Plasticity[M].Cambridge,ma:the Mit Press,1969:111. |
| [17] | Meyers M.A;Chawla K.K.Mechanical Metallurgy:Principles and Applications[M].Englewood Cliffs,Paramus,NJ,1984:134. |
| [18] | Min Song;Yue-hui He;Zheng-gang Wu;Bai-yun Huang .Multi-scale model for the ductility of multiple phase materials[J].Mechanics of Materials,2009(5):622-633. |
| [19] | Hutchinson J.W .Singular behavior at the end of a tensile crack in a hardening material[J].Journal of the Mechanics and Physics of Solids,1968,16(01):13. |
| [20] | Rice J.R;Rosengm G.F .Plane strain deformation near a crack tip in a power-law hardening material[J].Journal of the Mechanics and Physics of Solids,1968,16(01):1. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%