The present work mainly describes the technology for preparing indium-tin oxide(ITO)targets by cold isostatic pressing(CIP)and normal pressure sintering process.ITO powders were produced by chemical co-precipitation and shaped into an ITO green compact with a relative density of 60% by CIP under 300 MPa.Then,an ITO target with a relative density larger than 99.6% was obtained by sintering this green compact at 1550℃ for 8 h.The effects of forming pressure,sintering temperature and sintering time on the density of the target were investigated.Also,a discussion was made on the sintering atmosphere.
参考文献
[1] | Gurlo A.;Pfau A.;Weimar U.;Gopel W.;Ivanovskaya M. .SOL-GEL PREPARED IN2O3 THIN FILMS[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1997(1/2):288-293. |
[2] | Daoudi K;Canut B;Blanchin M.G;Sandu C.S,Teodorescu V.S, Roger J.A .Tin-doped indium oxide thin fihrs deposited by sol-gel dip-coating technique[J].Materials Science and Engineering,2002,21:313. |
[3] | Kentaro Utsumi;Osamu Matsunatga;Tsutomu Takahata .Low resistivity ITO film prepared using the ultra high density ITO target[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1998(1/2):30-34. |
[4] | Medvedovski E;Alvarez N;Yankov O;Olsson M.K .Advanced indium-tin oxide ceramics for sputtering targets[J].Ceramics International,2008,34(07):1173. |
[5] | Stuwart A.D;Thompson M.W .Microtopography of surfaces eroded by ion bombardment[J].Journal of Materials Science,1969,4:56. |
[6] | Tang S.C;Yao J.H;Chen J;Luo J.G .Preparation of indium tin oxide(ITO)with a single-phase structure[J].Journal of Materials Processing Technology,2003,137(06):82. |
[7] | Udawatte CP.;Yanagisawa K. .Sintering of additive free hydrothermally derived indium tin oxide powders in air[J].International Journal of Quantum Chemistry,2000(2):444-450. |
[8] | Murali AK.;Barve AD.;Risbud SH. .A kinetic study of indium nitride formation from indium oxide powders[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2002(2):111-114. |
[9] | Theunissen G.S.A.M;Winnubst A.J.A;Burggraaf A.J .Sintering kinetics and microstructure development of nanoscale Y-TZP ceramics[J].Journal of the European Ceramic Society,1993,11(04):315. |
[10] | Hulong Zhu;R. S. Averback .Sintering processes of two nanoparticles: a study by molecular dynamics simulations[J].Philosophical Magazine Letters,1996(1):27-33. |
[11] | de Wit J.H.W .The high temperature behavior of In2O3[J].Journal of Solid State Chemistry,1975,13(03):192. |
[12] | de Wit J.H.W;Laheij M;Elbers P.E .Grain growth and sintering of In2O3[J].Science of Ceramics,1977,9:143. |
[13] | Lamoreaux R.H;Hidenbrand D.L;Brewer L .High-temperature vaporization behavior of oxides:Ⅱ.Oxides of Be,Mg,Ca,Sr,Ba,B,Al,Ga,In,Tl,Si,Ge,Sn,Pb,Zn,Cd,and Hg[J].Journal of Physical and Chemical Reference Data,1987,16(03):419. |
[14] | Nakajima K;Sato N .Method of Manufacturing ITO Sputtering Target[P].United States Patent,5094787.3,1992. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%