Hot workability characteristics of Rene88DT superalloy with directionally solidified microstructure

稀有金属（英文版）, 2015, 34(1): 51-63. doi: 10.1007/s12598-014-0410-4

Fu-Lin Li ^1, , Rui Fu ^2, , Di Feng ^3, , Zhi-Ling Tian ^4,

1.Superalloy Department, Central Iron & Steel Research Institute,Beijing 100081, China

2.Superalloy Department, Central Iron & Steel Research Institute,Beijing 100081, China

3.Superalloy Department, Central Iron & Steel Research Institute,Beijing 100081, China

4.Superalloy Department, Central Iron & Steel Research Institute,Beijing 100081, China

基金项目: This work was financially supported by the Military Supporting Project (No.JPPT125GJGG11).

Hot workability characteristics of Rene88DT superalloy with directionally solidified microstructure

Keywords： Rene88DT alloy

参考文献

[1]	Wu, K.;Liu, G.Q.;Hu, B.F.;Wang, C.Y.;Zhang, Y.W.;Tao, Y.;Liu, J.T. .Effect of processing parameters on hot compressive deformation behavior of a new Ni-Cr-Co based P/M superalloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(13/14):4620-4629.
[2]	Ning, Y.;Yao, Z.;Fu, M.W.;Guo, H. .Dynamic recrystallization of the hot isostatically pressed P/M superalloy FGH4096 in hot working process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(26):6968-6974.
[3]	Li, L.;Zhang, X. .Hot compression deformation behavior and processing parameters of a cast Mg-Gd-Y-Zr alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1396-1401.
[4]	Mostafaei, M.A.;Kazeminezhad, M..Hot deformation behavior of hot extruded Al-6Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:216-221.
[5]	Samantaray, D.;Mandal, S.;Bhaduri, A.K. .Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(15):5204-5211.
[6]	Li, H.;Li, M.Q.;Han, T.;Liu, H.B..The deformation behavior of isothermally compressed Ti-17 titanium alloy in α+β field[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:40-45.
[7]	Ning, Y.;Yao, Z.;Yang, Z.;Guo, H.;Fu, M.W..Flow behavior and hot workability of FGH4096 superalloys with different initial microstructures by using advanced processing maps[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:91-97.
[8]	Heng-San Liu,Lin Zhang,Xin-Bo He,Xuan-Hui Qu,Zhou Li,Guo-Qing Zhang.Precipitation behavior of γ' phase in superalloy FGH96 under interrupted cooling test[J].稀有金属（英文版）,2013(06):560-563.
[9]	Wu, H.-Y.;Zhu, F.-J.;Wang, S.-C.;Wang, W.-R.;Wang, C.-C.;Chiu, C.-H. .Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy[J].Journal of Materials Science,2012(9):3971-3981.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
Fu-Lin Li Rui Fu Di Feng Zhi-Ling Tian
在百度学术搜索
Fu-Lin Li Rui Fu Di Feng Zhi-Ling Tian
在万方数据库搜索
Fu-Lin Li Rui Fu Di Feng Zhi-Ling Tian
在CNKI搜索
Fu-Lin Li Rui Fu Di Feng Zhi-Ling Tian

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Hot workability characteristics of Rene88DT superalloy with directionally solidified microstructure

参考文献