参考文献
[1] | W.J. Kim;J.Y.Wang;S.O. Choi;H.J. Choi;H.T. Sohn .Synthesis of ultra high strength Al-Mg-Si alloy sheets by differential speed rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):23-28. |
[2] | W.A. Soer;A.R. Chezan;J.Th.M. De Hosson .Deformation and reconstruction mechanisms in coarse-grained superplastic Al-Mg alloys[J].Acta materialia,2006(14):3827-3833. |
[3] | R. Mahmudi;R. Alizadeh;A.R. Geranmayeh .Enhanced superplasticity in equal-channel angularly pressed Sn-5Sb alloy[J].Scripta materialia,2011(6):521-524. |
[4] | G. Simons;Ch. Weippert;J. Dual;J. Villain .Size effects in tensile testing of thin cold rolled and annealed Cu foils[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):290-299. |
[5] | R. Kaibyshev;F. Musin;D. Gromov .Effect of liquid phase on superplastic behavior of a modified 6061 aluminum alloy[J].Scripta materialia,2002(9):569-575. |
[6] | L. P. Troeger;E. A. Starke Jr .Microstructural and mechanical characterization of a super plastic 6xxx aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):102-113. |
[7] | L. P. Troeger;E. A. Starke Jr. .Particle-stimulated nucleation of recrystallization for grain-size control and superplasticity in an Al-Mg-Si-Cu alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):19-29. |
[8] | W.J. Kim;S.J. Yoo .Enhanced ductility and deformation mechanisms of ultrafine-gralned Al-Mg-Si alloy In sheet form at warm temperatures[J].Scripta materialia,2009(2):125-128. |
[9] | B.P. KASHYAP;P.D. HODGSON;Y. ESTRIN .Plastic Flow Properties and Microstructural Evolution in an Ultrafine-Grained Al-Mg-Si Alloy at Elevated Temperatures[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2009(13):3294-3303. |
[10] | W.J. Kim;Y.K. Sa;H.K. Kim .Plastic forming of the equal-channel angular pressing processed 6061 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):360-368. |
[11] | B. Cherukuri;T.S. Nedkova;R. Srinivasan .A comparison of the properties of SPD-processed AA-6061 by equal-channel angular pressing, multi-axial compressions/forgings and accumulative roll bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):394-397. |
[12] | W.J. KIM;J.K. KIM;T.Y PARK .Enhancement of Strength and Superplasticity in a 6061 Al Alloy Processed by Equal-Channel-Angular-Pressing[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(10):3155-3164. |
[13] | M. Weiss;A.S. Taylor;P.D. Hodgson .Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation[J].Acta materialia,2013(14):5278-5289. |
[14] | K. Dehghani;A.A. Khamei .Hot deformation behavior of 60Nitinol (Ni60 wt%–Ti40 wt%) alloy:Experimental and computational studies[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(3):684-690. |
[15] | M. Karami;R. Mahmudi.Shear punch superplasticity in equal-channel angularly pressed Mg-12Li-1Zn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:156-159. |
[16] | H. Farnoush .Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases[J].Materials & design,2010(1):220-226. |
[17] | Y.C. Lin;Yi Ding;Ming-Song Chen;Jiao Deng .A new phenomenological constitutive model for hot tensile deformation behaviors of a typical Al-Cu-Mg alloy[J].Materials & design,2013(Dec.):118-127. |
[18] | A.V. Sergueeva;J. Zhou;B.E. Meacham;DJ. Branagan .Gage length and sample size effect on measured properties during tensile testing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):79-83. |
[19] | Y. H. Zhao;Y. Z. Guo;Q. Wei .Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu[J].Scripta materialia,2008(6):627-630. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%