Assessment of Fiber Distribution in Steel Fiber Mortar Using Image Analysis

武汉理工大学学报-材料科学版(英文版), 2012, (1): 166-171. doi: 10.1007/sl1595-012-0429-z

^1, , ^2, , ^3, , ^4, , ^5,

1.Jiangsu Key Laboratory of Civil Engineering Materials, Southeast University, Nanjing 211189, China; State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

2.Jiangsu Key Laboratory of Civil Engineering Materials, Southeast University, Nanjing 211189, China

3.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

4.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

5.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

基金项目: National Natural Science Foundation of China(50908104;50978126) Funded by National Basic Research Program of China(973 Program)(2009CB623200)

Assessment of Fiber Distribution in Steel Fiber Mortar Using Image Analysis

LIU Jianzhong ^1, , SUN Wei ^2, , MIAO Changwen ^3, , LIU Jiaping ^4, , LI Changfeng ^5,

2.Jiangsu Key Laboratory of Civil Engineering Materials, Southeast University, Nanjing 211189, China

3.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

4.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

5.State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science, Nanjing 210008, China

Keywords： image analysis

Abstratct:A new test method was introduced to measure fiber distribution in steel fiber reinforced mortar by using image analysis technique.Through specimen preparation,image acquisition,fiber extraction,and measurement of related fiber parameters,quantitative analysis of fiber distribution could be obtained by two parameters,namely dispersion coefficient and orientation factor.Effect of boundaries,size and steel fiber content on fiber distribution was discussed.Results showed that,steel fiber distribution was affected by boundary effect,which would be weakened with the increase of specimen size.If the length and width remained constant,the specimen height had a significant effect on orientation factor of fiber,while its influence on dispersion coefficient was not so obvious.With the increase of steel fiber content,dispersion coefficient decreased slightly,and orientation factor deviated from 0.5.

参考文献

[1]	LU Zhean,FAN Xiaochun,CHEN Yingbo.Mechanical Properties of Layered Steel Fiber and Hybrid Fiber Reinforced Concrete[J].武汉理工大学学报（材料科学版）（英文版）,2008(05):733-736.
[2]	John E. Bolander;Sokhwan Choi;Sri Ramya Duddukuri .Fracture of fiber-reinforced cement composites: effects of fiber dispersion[J].International Journal of Fracture,2008(1/2):73-86.
[3]	Nilufer Ozyurt;Thomas O. Mason;Surendra P. Shah .Correlation of fiber dispersion, rheology and mechanical performance of FRCs[J].Cement & concrete composites,2007(2):70-79.
[4]	Jean-Louis Chermant;Liliane Chermant;Michel Coster .Some fields of applications of automatic image analysis in civil engineering[J].Cement & concrete composites,2001(2/3):157-169.
[5]	Redon C.;Chermant JL.;Coster M.;Chermant L. .Assessment of fibre orientation in reinforced concrete using Fourier image transform[J].Journal of Microscopy,1998(Pt.3):258-265.
[6]	Yuanxia yang .Methods study on dispersion of fibers in CFRC[J].Cement and Concrete Research,2002(5):747-750.
[7]	J.F. Lataste;M. Behloul;D. Breysse .Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements[J].NDT & E international: Independent nondestructive testing and evaluation,2008(8):638-647.
[8]	Yong Hoon Lee;lSeok Won Lee;Jae Ryoun Youn;Kwansoo Chung;Tae Jin Kang .Characterization of fiber orientation in short fiber reinforced composites with an image processing technique[J].Materials research innovations,2002(2):65-72.
[9]	Yilmaz Akkaya;Jeffrey Picka;Surendra P. Shah .SPATIAL DISTRIBUTION OF ALIGNED SHORT FIBERS IN CEMENT COMPOSITES[J].Journal of Materials in Civil Engineering,2000(3):272-279.
[10]	David Dupont;Lucie Vandewalle .Distribution of steel fibres in rectangular sections[J].Cement & concrete composites,2005(3):391-398.
[11]	G. Zak;C. B. Park;B. Benhabib .Estimation of three-dimensional fibre-orientation distribution in short-fibre composites by a two-section method[J].Journal of Composite Materials,2001(4):316-319.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Assessment of Fiber Distribution in Steel Fiber Mortar Using Image Analysis

参考文献