欢迎登录材料期刊网

材料期刊网

高级检索

The effect of cryogenic temperature on adiabatic shear banding (ASBing) of tungsten heavy alloy (WHA) processed by hot-hydrostatic extrusion was investigated.Results show that,when the initial temperature is decreased,the dynamic flow stress,the critical failure time,and the dynamic failure energy of specimens show an increasing tendency,while the susceptibility to ASB of WHA shows a decreasing tendency,which is characterized by decreased shear strain and increased width of shear bands.Microstructure analysis shows that the number of microcracks within ASB exhibits an increasing tendency with decreased initial temperature,and the dynamic recrystallization (DRX) process within ASB is evidently suppressed at the lower temperature.As a result of the lower temperature,the motion and rearrangement of dislocation are effectively suppressed,which is mainly responsible for the incomplete DRX process within ASB and decreases susceptibility to ASB.

参考文献

[1] Wright T.W.The Physics and Mathematics of Adiabatic Shear Bands[M].Cambridge:Cambridge University Press,2002
[2] Bai Y;Dodd B.Adiabatic Shear Localization:Occurrence,Theories and Applications[M].New York:Pergamon Press,1992
[3] Wright T.W;Batra R.C .The initiation and growth of adiabatic shear bands[J].International Journal of Plasticity,1985,1(03):205.
[4] Zener C;Hollomon J.H .Effect of strain rate upon plastic flow of steel[J].Journal of Applied Physics,1944,15(01):22.
[5] Murr LE;Kennedy C;Magness LS;Kapoor D;Pappu S .Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):115-128.
[6] Pizana C;Murr L.E;Baquera M.T;Anchondo I.A Putrevu A Pina C.Y Tamoria T.C Chen H.C and Cytron S.J .Solid-state flow,mechanical alloying,and melt-related phenomena for[001]single-crystal W ballistic rod penetrators interacting with steel targets[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,428(1-2):301.
[7] Lins J.F.C;Sandim H.R.Z;Kestenbach H.J;Raabe D and Vecchio K.S .A microstructural investigation of adiabatic shear bands in an interstitial free steel[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2007,457(1-2):205.
[8] M. T. PEREZ-PRADO;J. A. HINES;K. S. VECCHIO .MICROSTRUCTURAL EVOLUTION IN ADIABATIC SHEAR BANDS IN Ta AND Ta-W ALLOYS[J].Acta materialia,2001(15):2905-2917.
[9] Xu Y.B;Zhong W.L;Chen Y.J;Shen L.T Liu Q Bai Y.L and Meyers M.A .Shear localization and recrystallization in dynamic deformation of 8090 Al-Li alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,299(1-2):287.
[10] J.A.HINES;K.S.VECCHIO .RECRYSTALLIZATION KINETICS WITHIN ADIABATIC SHEAR BANDS[J].Acta materialia,1997(2):635-649.
[11] Rittel D;Wang ZG;Merzer M .Adiabatic shear failure and dynamic stored energy of cold work[J].Physical review letters,2006(7):5502-1-5502-4-0.
[12] Rittel D;Landau P;Venkert A .Dynamic recrystallization as a potential cause for adiabatic shear failure[J].Physical Review Letters,2008,101:165501.
[13] G.H. Xiao;N.R. Tao;K. Lu .Effects of strain, strain rate and temperature on deformation twinning in a Cu-Zn alloy[J].Scripta materialia,2008(9):975-978.
[14] Z.S. You;L. Lu;K. Lu .Temperature effect on rolling behavior of nano-twinned copper[J].Scripta materialia,2010(6):415-418.
[15] Lee W.S;Liu C.Y .The effects of temperature and strain rate on the dynamic flow behaviour of different steels[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,426(1-2):101.
[16] Wei Q;Kecskes L.J .Effect of low-temperature rolling on the tensile behavior of commercially pure tungsten[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2008,491(1-2):62.
[17] Li DQ.;Liu Y.;Lin DL. .Effect of temperature on the tensile properties and dislocation structures of FeAl alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):206-216.
[18] Chan KC;Wang GF;Wang CL;Zhang KF .Low temperature and high strain rate superplasticity of the electrodeposited Ni/Si3N4(w) composite[J].Scripta materialia,2005(11):1285-1290.
[19] Dipankar Ghosh;Ghatu Subhash;Gerald R. Bourne .Room-temperature dislocation activity during mechanical deformation of polycrystalline ultra-high-temperature ceramics[J].Scripta materialia,2009(11):1075-1078.
[20] S. Naamane;G. Monnet;B. Devincre .Low temperature deformation in iron studied with dislocation dynamics simulations[J].International Journal of Plasticity,2010(1):84-92.
[21] Liu Jinxu;Li Shukui;Zhou Xiaoqing .Adiabatic shear banding in a tungsten heavy alloy processed by hot-hydrostatic extrusion and hot torsion[J].Scripta materialia,2008(12):1271-1274.
[22] Liu J.X;Li S.K;Fan A.L;Sun H.C .Effect of fibrous orientation on dynamic mechanical properties and susceptibility to adiabatic shear band of tungsten heavy alloy fabricated through hot-hydrostatic extrusion[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2008,487(1-2):235.
[23] Kocks U.F;Argon A.S;Ashby M.F .Thermodynamics and kinetics of slip[J].Progress in Materials Science,1975,19:291.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%