欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 中国有色金属学报(英文版)
  4. AA7150铝合金高应变速率热变形过程中显微组织动态演变表征

中国有色金属学报(英文版), 2016, 26(1): 51-62. doi: 10.1016/S1003-6326(16)64087-6

AA7150铝合金高应变速率热变形过程中显微组织动态演变表征

蒋福林 1, , 张辉 2, , 翁舒楚 3, , 傅定发 4,

1.湖南大学材料科学与工程学院,长沙410082;Department of Materials Science and Engineering,McMaster University,1280 Main Street West,Hamiltion,Ontario L8S 4L7,Canada

2.湖南大学材料科学与工程学院,长沙410082;湖南大学湖南省喷射沉积技术及应用重点实验室,长沙410082

3.湖南大学材料科学与工程学院,长沙,410082

4.湖南大学材料科学与工程学院,长沙410082;湖南大学湖南省喷射沉积技术及应用重点实验室,长沙410082

基金项目:   Project(CX2013B128) supported by Hunan Provincial Innovation Foundation for Postgraduate, China   Project(20130161110007) supported by the Doctoral Program of the Ministry of Education, China   Project(201306130021) supported by the Chinese Scholarship Council  

关键词： Al-Zn-Mg合金 , 热压缩 , 动态现象 , 显微组织

Characterization of dynamic microstructural evolution of AA7150 aluminum alloy at high strain rate during hot deformation

Keywords： Al-Zn-Mg alloy , hot compression , dynamic phenomena , microstructure

在温度分别为300℃和450℃条件下对AA7150铝合金进行高应变速率(10 s-1)热压缩实验.结合差热分析和透射电子显微镜对其不同应变下热变形过程流变行为、亚结构演变及析出相形貌和空间分布进行了系统研究.研究结果表明:AA7150铝合金热变形过程发生了流变软化,在300℃条件下主要软化机制是动态回复,而450℃条件下为连续动态再结晶;合金热变形过程中η相(300℃)及Al3Zr粒子(450℃)随应变的增加分布不均匀;T相中的铜含量随温度升高而增加且有从T相向S相转变的趋势,且随变形量的增加逐渐呈线性排列;显微组织还显示了动态析出及粒子诱发形核再结晶直接相关的形貌特征.

参考文献

[1] Cerri E.;Forcellese A.;Mcqueen HJ.;Evangelista E..COMPARATIVE HOT WORKABILITY OF 7012 AND 7075 ALLOYS AFTER DIFFERENT PRETREATMENTS[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19952(2):181-198.
[2] S.F. Harnish;H.A. Padilla;B.E. Gore.High-Temperature Mechanical Behavior and Hot Rolling of AA705X[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20052(2):357-369.
[3] O.V. Rofman;P.S. Bate.Dynamic grain growth and particle coarsening in Al-3.5Cu[J].Acta materialia,20107(7):2527-2534.
[4] Nengping Jin;Hui Zhang;Yi Han.Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature[J].Materials Characterization,20096(6):530-536.
[5] Deng, Y.;Yin, Z.;Huang, J..Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20113(3):1780-1786.
[6] M.R. Rokni;A. Zarei-Hanzaki;Ali A. Roostaei;H.R. Abedi.An investigation into the hot deformation characteristics of 7075 aluminum alloy[J].Materials & design,20114(4):2339-2344.
[7] Shengdan Liu;Jianghai You;Xinming Zhang;Yunlai Deng;Yubao Yuan.Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compression[J].Materials Science & Engineering. A, Structural Materials: Properties, Misrostructure and Processing,20104/5(4/5):1200-1205.
[8] H.E. Hu;L. Zhen;L. Yang;W.Z. Shao;B.Y. Zhang.Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20081/2(1/2):64-71.
[9] Xu, D.K.;Rometsch, P.A.;Birbilis, N..Improved solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part I. Characterisation of constituent particles and overheating[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:234-243.
[10] Xu, D.K.;Rometsch, P.A.;Birbilis, N..Improved solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part II. Microstructure and mechanical properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:244-252.
[11] Curtis SA.;Romero JS.;de los Rios ER.;Rodopoulos CA.;Levers A..Predicting the interfaces between fatigue crack growth regimes in 7150-T651 aluminium alloy using the fatigue damage map[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):79-85.
[12] E. NES.RECOVERY REVISITED[J].Acta Metallurgica et Materialia,19956(6):2189-2207.
[13] K.S. Ghosh;A.K. Kumar;M.K. Mohan.Calorimetric Studies And Kinetic Parameters Of Solid State Reactions In 7017 Al-Zn-Mg Alloy[J].Transactions of the Indian Institute of Metals,20086(6):487-496.
[14] K. S. GHOSH;N. GAO2.7150Al-Zn-Mg合金固态反应动力学参数的测定[J].中国有色金属学报（英文版）,2011(06):1199-1209.
[15] J.D. Robson.Microstructural evolution in aluminium alloy 7050 during processing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20041/2(1/2):112-121.
[16] L. L. Rokhlin;T. V. Dobatkina;N. R. Bochvar.Investigation of phase equilibria in alloys of the Al-Zn-Mg-Cu-Zr-Sc system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20041/2(1/2):10-16.
[17] Ling-Mei Wu;Wen-Hsiung Wang;Yung-Fu Hsu.Effects of homogenization treatment on recrystallization behavior and dispersoid distribution in an Al-Zn-Mg-Sc-Zr alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20081/2(1/2):163-169.
[18] D. Godard;P. Archambault;E. Aeby-Gautier.Precipitation sequences during quenching of the AA 7010 alloy[J].Acta materialia,20029(9):2319-2329.
[19] A. Deschamps;Y. Brechet.Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu alloy[J].Scripta materialia,199811(11):1517-1522.
[20] Deschamps A.;Brechet Y..Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19981/2(1/2):200-207.
[21] Dumont D.;Deschamps A.;Brechet Y..On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):326-336.
[22] Shengdan Liu;Wenjun Liu;Yong Zhang;Xinming Zhang;Yunlai Deng.Effect of microstructure on the quench sensitivity of AlZnMgCu alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20101(1):53-61.
[23] BRUCE MORERE;CLAIRE MAURICE;RAVI SHAHANI.The Influence of Al_3Zr Dispersoids on the Recrystallization of Hot-Deformed AA 7010 Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20013(3):625-632.
[24] Mondal C;Mukhopadhyay AK.On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20051/2(1/2):367-376.
[25] T. Marlaud;A. Deschamps;F. Bley.Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys[J].Acta materialia,20101(1):248-260.
[26] A. Deschamps;G. Fribourg;Y. Brechet.In situ evaluation of dynamic precipitation during plastic straining of an Al-Zn-Mg-Cu alloy[J].Acta materialia,20125(5):1905-1916.
[27] O. ENGLER;X. W. KONG;K. LUCKE.RECRYSTALLISATION TEXTURES OF PARTICLE-CONTAINING Al-Cu AND Al-Mn SINGLE CRYSTALS[J].Acta materialia,200110(10):1701-1715.
[28] T.A. Bennett;R.H. Petrov;L.A.I. Kestens;L.-Z. Zhuang;P. de Smet.The effect of particle-stimulated nucleation on texture banding in an aluminium alloy[J].Scripta materialia,20105(5):461-464.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net