为研究双向玻纤织物复合材料在复杂应力状态下的力学行为,设计双轴加载十字型试样,对其进行不同载荷比的双轴拉伸实验,对比分析了材料在双轴拉伸载荷下的拉伸模量、拉伸强度及失效模式.结果表明:双向玻纤织物复合材料单轴拉伸行为表现为后期非线性、脆性断裂,双轴拉伸载荷下非线性现象更为显著;双轴拉伸模量随载荷的增大而增加,双轴拉伸载荷对材料的拉伸模量具有一定的强化作用;材料的双轴拉伸强度存在双向弱化效应,等比例双轴拉伸时,双轴拉伸强度最低,仅为单轴强度的60.5%;试样破坏发生于中心实验区域,材料不同载荷比的破坏形式有所不同,分别主要表现为纤维断裂、基体失效和玻纤布分层.
参考文献
[1] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12. |
[2] | 刘代军,陈亚莉.先进树脂基复合材料在航空工业中的应用[J].材料工程,2008(z1):194-198. |
[3] | 沈观林;胡更开.复合材料力学[M].北京:清华大学出版社,2006 |
[4] | Mailly L;Wang SS .Recent development of planar cruciform experiment on biaxial tensile deformation and failure of unidirectional glass/epoxy composite[J].Journal of Composite Materials,2008(13):1359-1379. |
[5] | A. Smits;D. Van Hemelrijck;T.P. Philippidis;A. Cardon .Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates[J].Composites science and technology,2006(7/8):964-975. |
[6] | A. Makris;T. Vandenbergh;C. Ramault;D. Van Hemelrijck;E. Lamkanfi;W. Van Paepegem .Shape optimisation of a biaxially loaded cruciform specimen[J].Polymer Testing,2010(2):216-223. |
[7] | Ebrahim Lamkanfi;Wim Van Paepegem;Joris Degrieck;Carla Ramault;Andreas Makris;Danny Van Hemelrijck .Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model[J].Polymer Testing,2010(1):7-13. |
[8] | Ebrahim Lamkanfi;Wim Van Paepegem;Joris Degrieck;Carla Ramault;Andreas Makris;Danny Van Hemelrijck .Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities[J].Polymer Testing,2010(1):132-138. |
[9] | Failure prediction for a glass/epoxy cruciform specimen under static biaxial loading[J].Composites science and technology,2010(8):P.1232. |
[10] | M.C. Serna Moreno;J.J. Lopez Cela .Failure envelope under biaxial tensile loading for chopped glass-reinforced polyester composites[J].Composites science and technology,2011(1):91-96. |
[11] | 王颖晖,方岱宁.功能材料双轴拉伸十字板试件的优化设计[J].力学学报,2002(05):705-714. |
[12] | 吴向东,万敏,周贤宾.十字形双向拉伸试验有限元模拟及分析[J].塑性工程学报,2001(02):57-59. |
[13] | 任家陶,李冈陵,豆志武,赖伟栋.双向拉伸试验的进展与钛板双向拉伸的强化研究[J].实验力学,2001(02):196-206. |
[14] | 陆晓华 .双轴纤维增强复合材料强度准则研究与双向拉伸试验[D].南京航空航天大学,2007. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%