欢迎登录材料期刊网

材料期刊网

高级检索

采用ER4043,ER4047铝硅合金焊丝对AZ31镁合金和7005铝合金异种材料进行填丝钨极氩弧焊(GTAW),并对AZ31/7005接头进行微观组织观察和显微硬度分析.结果表明:采用填丝钨极氩弧焊工艺,可以获得表面成形良好的焊接接头;镁侧熔合区是接头力学性能的薄弱区,镁侧熔合区不同结晶区域Mg和Al的成分较为接近,组织主要为Mg17Al12+Mg共晶体组织;靠近镁侧熔合区无高硬度脆性相产生,焊缝区的硬度稍高于镁母材区,但远低于铝母材区.

参考文献

[1] 祁庆琚.镁合金的研究进展[J].上海有色金属,2005(01):43-49.
[2] 黄伯云.我国有色金属材料现状及发展战略[J].中国有色金属学报,2004(z1):122-127.
[3] SOMASEKHARAN A C;MURR L E .Microstructure in frictionstir welded dissimilar magnesium alloys to 6061-T6 aluminum alloy[J].Materials Characterization,2004,52(01):49-64.
[4] Rudolf Zettler;Antonio Augusto Monarco da Silva;Saulo Rodrigues;Antonio Blanco;Jorge Fernandez dos Santos .Dissimilar Al to Mg Alloy Friction Stir Welds[J].Advanced Engineering Materials,2006(5):415-421.
[5] 封小松,郭立杰,苗玉刚,韩端锋.镁/铝异种金属填充式摩擦点焊接头特性[J].焊接学报,2013(11):41-44.
[6] BEN ARTZY A;MUNITZ A;KOHN G.Joining of light hybrid constructions made of magnesium and aluminum alloys[A].Seattle,Washington:TMS,2002:295-302.
[7] Liu Peng;Li Yajiang;Geng Haoran .A study of phase constitution near the interface of Mg/Al vacuum[J].Materials Letters,2005(16):2001-2005.
[8] LIU Li-ming;TAN Jin-hong;LIU Xu-jing .Reactive brazing of Al alloy to Mg alloy using zinebased brazing alloy[J].Materials Letters,2007,61(11-12):2373-2377.
[9] 尚晶,王克鸿,田宏军,周琦,李广乐.冷金属过渡搭接焊镁铝异种金属接头组织及性能[J].焊接学报,2011(12):41-45.
[10] 柳绪静,刘黎明,王恒,宋刚.镁铝异种金属激光-TIG复合热源焊焊接性分析[J].焊接学报,2005(08):31-34.
[11] SCHUBERT E;KLASSEN M;ZERNER T et al.Lighvweight structures produced by laser beam joining for future applications in automobile and aerospace industry[J].Materials Processing Technology,2001,115(01):2-8.
[12] L.Lu;Y.F.Zhang .Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1999(1/2):279-283.
[13] 王立跃;徐道荣.ME20M和AZ31镁合金手工TIG焊接头缺陷分析[J].现代焊接,2010(11):32-35.
[14] 李亚江,刘鹏,王娟,夏春智.Mg/Al异种材料脉冲TIG焊接头的组织结构[J].焊接学报,2006(09):39-42.
[15] 尚晶,王克鸿,周琦,张德库,黄俊,李广乐.ER4043焊丝Mg/Al异种金属冷金属过渡焊接接头组织及性能研究[J].稀有金属材料与工程,2013(07):1337-1341.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%