欢迎登录材料期刊网

材料期刊网

高级检索

界面层是陶瓷基复合材料中的关键组成部分,因对复合材料的各项性能都有重要影响,而成为陶瓷基复合材料研究的重点之一.本文在叙述界面层功能的基础上,分别对结构陶瓷基复合材料和抗氧化陶瓷基复合材料的界面层研究现状进行讨论,分析了研究中存在的问题,指出了未来研究的方向和重点.

参考文献

[1] Krenkel W;Berndt F .C/C-SiC composites for space applications and advanced friction systems[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):177-181.
[2] Ohnabe Hisaichi;Masaki Shoju .Potential application of ceramic matrix composites to aero-engine components[J].Composites, Part A. Applied science and manufacturing,1999(4):489-496.
[3] 郭洪宝,王波,矫桂琼,刘永胜.2D-Cf/SiC复合材料缺口试件拉伸力学行为研究[J].材料工程,2013(05):83-88.
[4] NASLAIN R .The design of the fiber-matrix interfacial zone in ceramic matrix composites[J].Compos Part A,1998,29A:1145-1155.
[5] Appiah KA.;Lackey WJ.;Wang ZL. .Characterization of interfaces in C fiber-reinforced laminated C-SiC matrix composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2000(6):831-838.
[6] D.B.Marshall;J.B.Davis;P.E.D.Morgan .Interface materials for damage-tolerant oxide composites[J].Key engineering materials,1997(1):27-36.
[7] TAYLOR R.Carbon matrix composites[A].Oxford,UK:Elsevier Science Ltd,2000:1-19.
[8] Effect of isotropic interlayers on the mechanical and thermal properties of carbon/carbon composites[J].Materials Letters,2010(13):1536.
[9] Araki H;Yang W;Suzuki H;Hu Q;Busabok C;Noda T .Fabrication and flexural properties of Tyranno-SA/SIC composites with carbon interlayer by CVI[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(0):567-571.
[10] Xu YD.;Cheng LF.;Yan DT.;Zhang LT. .Microstructure and mechanical properties of three-dimensional carbon/silicon carbide composites fabricated by chemical vapor infiltration[J].Carbon: An International Journal Sponsored by the American Carbon Society,1998(7/8):1051-1056.
[11] Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites[J].Materials Letters,2009(23):2022-2024.
[12] Asher S. Ahmed;Rees D. Rawlings;Stephen D. Ellacott .Microstructural and compositional characterisation of the pyrocarbon interlayer in SiC coated low density carbon/carbon composites[J].Journal of the European Ceramic Society,2011(1/2):189-197.
[13] Ma Yan;Wang Song;Zhao-hui Chen .In situ growth of a carbon interphase between carbon fibres and a polycarbosilane-derived silicon carbide matrix[J].Carbon: An International Journal Sponsored by the American Carbon Society,2011(8):2869-2872.
[14] Haitao Liu;Hao Tian .Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process[J].Journal of the European Ceramic Society,2012(10):2505-2512.
[15] Ding, D.;Zhou, W.;Luo, F.;Chen, M.;Zhu, D..Dip-coating of boron nitride interphase and its effects on mechanical properties of SiC _f/SiC composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:1-5.
[16] A., U.;M., S.;K., V..Effect of CVD SiC seal coating on the mechanical properties of C_f/SiC composites generated through CVI[J].Surface & Coatings Technology,2013:75-81.
[17] WU H;CHEN M;WEI X et al.Deposition of BN interphase coatings from B-trichloroborazine and its effects on the mechanical properties of SiC/SiC composites[J].Applied Surface Sinence,2010,257(04):1276-1281.
[18] Udayakumar, A.;Raole, P.M.;Balasubramanian, M. .Synthesis of tailored 2D SiC_f/SiC ceramic matrix composites with BN/C interphase through ICVI[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2011(1/3):363-366.
[19] A. Udayakumar;A. Sri Ganesh;S. Raja .Effect of intermediate heat treatment on mechanical properties of SiC_f/SiC composites with BN interphase prepared by ICVI[J].Journal of the European Ceramic Society,2011(6):1145-1153.
[20] NASLAIN R;DUGNE O;GUETTE A et al.Boron nitride interphase in ceramic-matrix composites[J].J Am Cerom Soc,1991,74(10):2482-2488.
[21] Y. Zhong;W. Hu;J.I. Eldridge;H. Chen;J. Song;G. Gottstein .Fiber push-out tests on Al2O3 fiber-reinforced NiAl-composites with and without hBN-interlayer at room and elevated temperatures[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):372-380.
[22] M.K.Cinibulk .Hexaluminates as a cleavable fiber-matrix interphase: synthesis, texture development, and phase compatibility[J].Journal of the European Ceramic Society,2000(5):569-582.
[23] Reig P.;Naslain R.;Demazeau G. .KMG2ALSI4O12 PHYLLOSILOXIDE AS POTENTIAL INTERPHASE MATERIAL FOR CERAMIC MATRIX COMPOSITES .1. CHEMICAL COMPATIBILITY[J].Journal of Materials Science,1997(16):4189-4194.
[24] Reig P.;Naslain R.;Demazeau G. .KMG2ALSI4O12 PHYLLOSILOXIDE AS POTENTIAL INTERPHASE MATERIAL FOR CERAMIC MATRIX COMPOSITES .2. COATED FIBRES AND MODEL COMPOSITES[J].Journal of Materials Science,1997(16):4195-4200.
[25] H.J. Yu;X.G. Zhou;W. Zhang;H.X. Peng;C.R. Zhang;Z.L Huang .Mechanical properties of 3D KD-I SiC_f/SiC composites with engineered fibre-matrix interfaces[J].Composites science and technology,2011(5):699-704.
[26] CHENG L F;XU Y;ZHANG L et al.Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500℃[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2001,300:219-225.
[27] Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE process[J].Composites science and technology,2008(1):p.98.
[28] Hui Mei;Qianglai Bai;Yuyao Sun.The effect of heat treatment on the strength and toughness of carbon fiber/silicon carbide composites with different pyrolytic carbon interphase thicknesses[J].Carbon: An International Journal Sponsored by the American Carbon Society,2013:288-297.
[29] Si'an Chen;Yudi Zhang;Changrui Zhang;Dan Zhao;Haifeng Hu;Zhibin Zhang .Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis route[J].Materials & design,2013(Apr.):497-502.
[30] Ding, D.;Zhou, W.;Luo, F.;Mu, Y.;Zhu, D..The effects of CVD SiC interphase on mechanical properties of KD-1 SiC fiber reinforced aluminum phosphate composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:347-352.
[31] PASQUIER S;LAMON J;NASLAIN R .Tensile static fatigue of 2D SiC/SiC composites with multilayered (PyC-SiC)n interphases at high temperatures in oxidizing atmosphere[J].Compos Part A,1998,29:1157-1164.
[32] 朱云洲,黄政仁,董绍明,袁明,江东亮.PyC/SiC界面相对PIP法制备3D HTA C/SiC复合材料性能的影响[J].新型炭材料,2007(04):327-331.
[33] Taguchi T;Nozawa T;Igawa N;Katoh Y;Jitsukawa S;Kohyama A;Hinoki T;Snead LL .Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(0):572-576.
[34] S.Bertrand;C.Droillard .TEM structure of (PyC/SiC)_n multilayered interphases in SiC/SiC composites[J].Journal of the European Ceramic Society,2000(1):1-13.
[35] YANG W;ARAKI H;KOHYAMA A et al.Effects of SiC sub-layer on mechanical properties of Tyranno-SA/SiC composites with multiple interlayers[J].CERAMICS INTERNATIONAL,2005,31(04):525-531.
[36] Z. Wang;S.M. Dong;Y.S. Ding .Mechanical properties and microstructures of C_f/SiC-ZrC composites using T700SC carbon fibers as reinforcements[J].CERAMICS INTERNATIONAL,2011(3):695-700.
[37] Haijiao Yu;Xingui Zhou;Wei Zhang;Huaxin Peng;Changrui Zhang .Mechanical behavior of SiC_f/SiC composites with alternating PyC/SiC multilayer interphases[J].Materials & design,2013(Feb.):320-324.
[38] Ying Long;Athar Javed;Yang Zhao .Fiber/matrix interfacial shear strength of C/C composites with PyC-TaC-PyC and PyC-SiC-TaC-PyC multi-interlayers[J].CERAMICS INTERNATIONAL,2013(6):6489-6496.
[39] ZENG Fan-hao,XIONG Xiang,LI Guo-dong,HUANG Bai-yun,LUO Jian.Microstructure and mechanical properties of 3D fine-woven punctured C/C composites with P_yC/SiC/TaC interphases[J].中国有色金属学报(英文版),2009(06):1428-1435.
[40] Xiang Xiong;Ya-lei Wang;Zhao-ke Chen .Mechanical properties and fracture behaviors of C/C composites with PyC/TaC/PyC, PyC/SiC/TaC/PyC multi-interlayers[J].Solid state sciences,2009(8):1386-1392.
[41] Chen Zhao-ke;Xiong Xiang;Li Guo-dong;Wang Ya-lei .Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(22):8986-8994.
[42] Yunzhou Zhu;Bingbing Pei;Ming Yuan .Microstructure and properties of Cf/SiC composites with thin SiCN layer as fiber-protecting coating[J].CERAMICS INTERNATIONAL,2013(6):7101-7106.
[43] BLANKS K S;KRISTOFFERSSON A;CARLSTROM E et al.Crack deflection in ceramic laminates using porous interlayers[J].Journal of the European Ceramic Society,1998,18(13):1945-1951.
[44] MA J;WANG H;WENG L et al.Effect of porous interlayers on crack deflection in ceramic laminates[J].Journal of the European Ceramic Society,2004,24(05):825-831.
[45] M.Holmquist;R.Lundberg .Alumina/alumina composite with a porous zirconia interphase-processing, properties and component testing[J].Journal of the European Ceramic Society,2000(5):599-606.
[46] Donghai Ding;Wancheng Zhou;Fa Luo .Mechanical properties and oxidation resistance of SiC_f/CVI-SiC composites with PIP-SiC interphase[J].CERAMICS INTERNATIONAL,2012(5):3929-3934.
[47] Haitao Liu;Haifeng Cheng;Jun Wang;Gengping Tang .Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process[J].CERAMICS INTERNATIONAL,2010(7):2033-2037.
[48] REBILLAT F;GUETTE A;ESPITALIER L et al.Oxidation resistance of SiC/SiC micro and minicomposites with a highly crystallized BN interphase[J].Journal of the European Ceramic Society,1998,18(13):1809-1819.
[49] Richard E. Tressler .Recent developments in fibers and interphases for high temperature ceramic matrix composites[J].Composites, Part A. Applied science and manufacturing,1999(4):429-437.
[50] Guofeng Lu;Shengru Qiao;Chengyu Zhang .Oxidation protection of C/Si-C-N composite by a mullite interphase[J].Composites. Part A, Applied science and manufacturing,2008(9):1467-1470.
[51] Guofeng Lu;Shengru Qiao;Chengyu Zhang .Oxidation Behaviors and Mechanisms of C/Si-C-N with a Mullite Interlayer[J].Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials,2011(2):179-195.
[52] LABRUQUERE S;BLANCHARD H;PAILLER R et al.Enhancement of the oxidation resistance of interfacial area in C/C composites.Part Ⅱ:oxidation resistance of B-C,Si-B-C and Si-C coated carbon preforms densified with carbon[J].Journal of the European Ceramic Society,2002,22(07):1011-1021.
[53] LU G;JIAO G .Balance the oxidation resistance and mechanical properties of C/Si-C-N composite by a Si-O-C interphase[J].Compos Interfaces,2012,19(02):83-91.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%