在Gleeble 3800热模拟试验机上进行GH4706合金的热压缩实验,研究了变形温度为900～1150℃、应变速率为0.001～1s-1范围内合金的热变形行为.结果表明:GH4706合金的真应力真应变曲线呈现出流变软化特征,随变形温度增加或应变速率减小,峰值应力逐渐降低,峰值应变逐渐减小.合金的本构关系可由双曲正弦函数描述,变形激活能为435.36kJ/mol,应力指数为4.13.合金的显微组织演化机制与Z参数密切相关,高Z值条件下主要发生动态回复,低Z值条件下主要发生动态再结晶与再结晶晶粒粗化.GH4706合金发生完全动态再结晶且不发生晶粒粗化的临界lnZ值为35.
参考文献
| [1] | SCHILKE P W;SCHWANT R C.Alloy 706 use,process optimization,and future directions for GE gas turbine rotor materials[A].Warrendale,PA:TMS,2001:25-34. |
| [2] | SCHILKE P W;PEPE J;SCHWANT R C.Alloy 706 metallurgy and turbine wheel application superalloys[A].Warrendale,PA:TMS,1994:1-12. |
| [3] | 张北江,赵光普,焦兰英,胥国华,秦鹤勇,冯涤.热加工工艺对GH4586合金微观组织的影响[J].金属学报,2005(04):351-356. |
| [4] | 曲敬龙,杜金辉,王民庆,毕中南,张继.GH4720Li合金细晶棒材制备的热加工工艺研究[J].材料工程,2013(02):74-77,86. |
| [5] | SRINIVASAN N;PRASAD Y V R K .Microstructural control in hot working of IN718 superalloy using processing map[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25(10):2275-2284. |
| [6] | 马龙腾,王立民,胡劲,刘正东,张秀丽.AISI403马氏体不锈钢的热变形特性研究[J].材料工程,2013(05):38-43. |
| [7] | THAMBOO S V.Thermochemical behavior and microstructure development of alloy 706[A].Warrendale,PA:TMS,1997:211-217. |
| [8] | LONG Z D;FU D X;MAP L.Hot-workability of IN 706 alloy[A].Warrendale,PA:TMS,1997:205-210. |
| [9] | Defu Li;Qingmiao Guo;Shengli Guo;Haijian Peng;Zhigang Wu .The microstructure evolution and nucleation mechanisms of dynamic recrystallization in hot-deformed Inconel 625 superalloy[J].Materials & design,2011(2):696-705. |
| [10] | Aghaie-Khafri, M;Golarzi, N .Forming behavior and workability of Hastelloy X superalloy during hot deformation[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):641-647. |
| [11] | S.F.MEDINA;C.A.HERNANDEZ .GENERAL EXPRESSION OF THE ZENER-HOLLOMON PARAMETER AS A FUNCTION OF THE CHEMICAL COMPOSITION OF LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):137-148. |
| [12] | Wang, Y;Shao, WZ;Zhen, L;Zhang, XM .Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):321-332. |
| [13] | MEDEIROS S C;PRASAD Y V R K;FRAZIER W G et al.Microstructure modeling of metadynamic recrystallizaiton in hot working of IN718 superalloy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2000,293(1-2):198-207. |
| [14] | BROOKS J W .Forging of superalloys[J].Materials and Design,2000,21(4):297-303. |
| [15] | FESLAND J P;PETIT P.Manufacturing of alloy 706 forging[A].Warrendale,PA:TMS,1994:229-238. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%