综述了连续纤维增强聚合物基复合材料的低速冲击响应研究进展.讨论了测试方法及相关影响参数,例如冲头的形状、冲击速率对复合材料冲击的影响;介绍了冲击损伤的类型,进一步描述了层压板结构参数(如层合板厚度,铺层和缝纫)、复合材料组分材料性能(如纤维,树脂和纤维/树脂界面)以及预应力、环境条件等的影响;提出了纤维增强聚合物基复合材料冲击响应研究今后的发展方向.
参考文献
| [1] | 益小苏.先进树脂基复合材料高性能化理论与实践[M].北京:国防工业出版社,2011 |
| [2] | BYRES B A .Behaviour of damaged graphite/epoxy laminates under compression loading.NASA CR-159293[R].Washington D C:National Aeronautics and Space Administration,1980. |
| [3] | CHAWLA K K.Composite Materials:Science and Engineering[M].New York:Springer,2012 |
| [4] | M. Yasaee;I.P. Bond;R.S. Trask .Damage control using discrete thermoplastic film inserts[J].Composites, Part A. Applied science and manufacturing,2012(6):978-989. |
| [5] | MUBARAK ALI;SUNIL C. JOSHI .Impact Damage Resistance of CFRP Prepreg Laminates with Dispersed CSP Particles into Ply Interfaces[J].International Journal of Damage Mechanics,2012(8):1106-1127. |
| [6] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12. |
| [7] | CANTWELL W J;MORTON J .The impact resistance of composite materials-a review[J].COMPOSITES,1991,22(5):347-362. |
| [8] | SJOBLOM P O;HARTNESS J T;CORDELL T M .On low velocity impact testing of composite materials[J].Journal of Composite Materials,1988,22(1):30-52. |
| [9] | SHIVAKUMAR K N;ELBER W;ILLG W .Prediction of low velocity impact damage in thin circular laminates[J].AIAA Journal,1985,23(3):442-449. |
| [10] | O1sson R.; .Mass criterion for wave controlled impact response of composite plates[J].Composites, Part A. Applied science and manufacturing,2000(8):879-887. |
| [11] | SCHONBERG W P .Hypervelocity impact response of spaced composite material structures[J].International Journal of Impact Engineering,1990,10(1):509-523. |
| [12] | JOSHI S P;SUN C T.Impact-induced fracture initiation and detailed dynamic stress field in the vicinity of impact[A].Newark:DE,1987:177-185. |
| [13] | ROBINSON P;DAVIES G .Impactor mass and specimen geometry effects in low velocity impact of laminated composites[J].International Journal of Impact Engineering,1992,12(2):189-207. |
| [14] | DAVIES D;ROBINSON P.Predicting failure by debonding/delamination[A].Greece:Patras,1992:25-29. |
| [15] | YAGHOUBI S A;LIAW B .Effect of lay-up orientation on ballistic impact behaviors of GLARE 5 FML beams[J].International Journal of Impact Engineering,2012,54:138-148. |
| [16] | Ercan Sevkat.Experimental and numerical approaches for estimating ballistic limit velocities of woven composite beams[J].International journal of impact engineering,2012:16-27. |
| [17] | LIU D;MALVERN L E .Matrix cracking in impacted glass/epoxy plates[J].Journal of Composite Materials,1987,21(7):594-609. |
| [18] | Experimental optimization of the impact energy absorption of epoxy-carbon laminates through controlled delamination[J].Composites science and technology,2008(13):p.2653. |
| [19] | SHYR T W;PAN Y H .Impact resistance and damage characteristics of composite laminates[J].Computers & Structures,2003,62(2):193-203. |
| [20] | 益小苏.先进复合材料技术研究与发展[M].北京:国防工业出版社,2006 |
| [21] | G. A. O. Davies;R. Olsson .Impact on composite structures[J].Aeronautical journal,2004(1089):541-563. |
| [22] | RICHARDSON M O W;WISHEART M J .Review of low-velocity impact properties of composite materials[J].Composites Part A.:Applied Science and Manufacturing,1996,27(12):1123-1131. |
| [23] | Amin Salehi-Khojin;Mohammad Mahinfalah;Reza Bashirzadeh;Brian Freeman .Temperature effects on Kevlar/hybrid and carbon fiber composite sandwiches under impact loading[J].Composite structures,2007(2):197-206. |
| [24] | CANTWELL W J;MORTON J .Geometrical effects in the low velocity impact response of CFRP[J].Computers & Structures,1989,12(1):39-59. |
| [25] | Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes[J].Composites science and technology,2010(4):553. |
| [26] | D. D. R. Cartie;P. E. Irving .Effect of resin and fibre properties on impact and compression after impact performance of CFRP[J].Composites, Part A. Applied science and manufacturing,2002(4):483-493. |
| [27] | ABRATE S.Impact on Composite Structures[M].London:Cambridge University Press,1998 |
| [28] | 王丹勇,温卫东.复合材料单向层合板损伤失效试验研究[J].复合材料学报,2007(05):142-148. |
| [29] | Christian Gamier;Marie-Laetitia Pastor;Florent Eyma;Bernard Lorrain .The detection of aeronautical defects in situ on composite structures using Non Destructive Testing[J].Composite structures,2011(5):1328-1336. |
| [30] | 刘松平,刘菲菲,郭恩明,李乐刚,史俊伟.我国航空材料和结构先进无损检测技术之应用与发展[J].无损检测,2013(07):64-69. |
| [31] | HONG S;LIU D .On the relationship between impact energy and delamination area[J].Experimental Mechanics,1989,29(2):115-120. |
| [32] | HULL D;SHI Y B .Damage mechanism characterization in composite damage tolerance investigations[J].Computers & Structures,1993,23(2):99-102. |
| [33] | DOREY G.Impact damage tolerance and assessment in advanced composite materials[A].UK:Cranfield Institute of Technology,1986 |
| [34] | DOREY G.Impact damage in composites-development,consequences,and prevention[A].London:Imperial College,1988:1-26. |
| [35] | DOREY G;SIGETY P;STELLBRINK K et al.Impact damage tolerance of carbon fibre and hybrid laminates.RAE Technical Report-87057[R].Farnborough,UK:Royal Aerospace Establishment,1987. |
| [36] | CHOI H Y;DOWNS R J;CHANG F K .A new approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact:part Ⅰ experiments[J].Journal of Composite Materials,1991,25(8):992-1011. |
| [37] | JOSHI S P;SUN C T .Impact induced fracture in a laminated composite[J].Journal of Composite Materials,1985,19(1):51-66. |
| [38] | GARG A .Delamination-a damage mode in composite structures[J].Engineering Fracture Mechanics,1988,29(5):557-584. |
| [39] | LIU S;CHANG F K .Matrix cracking effect on delamination growth in composite laminates induced by a spherical indenter[J].Journal of Composite Materials,1994,28(10):940-977. |
| [40] | A.M. Amaro;P.N.B. Reis;M.F.S.F. de Moura;M.A. Neto .Influence of open holes on composites delamination induced by low velocity impact loads[J].Composite structures,2013(Mar.):239-244. |
| [41] | SUN C T;MANOHARAN M G .Growth of delamination cracks due to bending in a[90°5/0°5/90°5]laminate[J].Composites Science and Technology,1989,34(4):365-377. |
| [42] | HOJO M;KAGEYAMA K;TANAKA K .Prestandardization study on mode I interlaminar fracture toughness test for CFRP in Japan[J].COMPOSITES,1995,26(4):243-255. |
| [43] | TAKAKA K;KAGEYAMA K;HOJO M .Prestandardization study on mode Ⅱ interlaminar fracture toughness test for CFRP in Japan[J].COMPOSITES,1995,26(4):257-267. |
| [44] | CHANG F K;CHOI H Y;JENG S T .Study on impact damage in laminated composites[J].Mechanics of Materials,1990,10(1-2):83-95. |
| [45] | ABRATE S.Impact Engineering of Composite Structures[M].Germany:Springer Vienna,2011 |
| [46] | EL-HABAK A M .Effect of impact perforation load on GFRP composites[J].COMPOSITES,1993,24(4):341-345. |
| [47] | Sandeep Agrawal;Kalyan Kumar Singh;PK Sarkar .Impact damage on fibre-reinforced polymer matrix composite – A review[J].Journal of Composite Materials,2014(3):317-332. |
| [48] | MITREVSKI T;MARSHALL I H;THOMSON R et al.The effect of impactor shape on the impact response of composite laminates[J].Computers & Structures,2005,67(2):139-148. |
| [49] | ABRATE S .Impact on laminated composite materials[J].Applied Mechanics Review,1991,44(4):155-190. |
| [50] | E.V. Gonzalez;P. Maimi;P.P. Camanho;A. Turon;J.A. Mayugo .Simulation of drop-weight impact and compression after impact tests on composite laminates[J].Composite structures,2012(11):3364-3378. |
| [51] | HITCHEN S A;KEMP R M J .The effect of stacking sequence on impact damage in a carbon fibre/epoxy composite[J].COMPOSITES,1995,26(3):207-214. |
| [52] | Mandar D. Kulkarni;Rahul Goel;N.K. Naik .Effect of back pressure on impact and compression-after-impact characteristics of composites[J].Composite structures,2011(2):944-951. |
| [53] | KONDO H;AOKI Y;HIRAOKA K.Residual indentation,delamination area and CAI strength of CFRP laminate under lowvelocity impact[A].Kyoto:the Japan Society for Composite Materials,2007:1-7. |
| [54] | Shuichi Wakayama;Satoshi Kobayashi;Takayuki Iniai .Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber[J].Composites, Part A. Applied science and manufacturing,2006(11):2002-2010. |
| [55] | Impact damage initiation in composite materials[J].Composites science and technology,2010(2):336. |
| [56] | SUPRATIK DATTA;A.VAMSEE KRISHNA;R.M.V.G.K.RAO .Low Velocity Impact Damage Tolerance Studies on Glass-Epoxy Laminates - Effects of Material,Process and Test Parameters[J].Journal of Reinforced Plastics and Composites,2004(3):327-345. |
| [57] | 程小全,吴学仁.复合材料层合板低速冲击损伤容限的改进方法和影响因素[J].高分子材料科学与工程,2002(03):20-25. |
| [58] | J. N. BAUCOM;M. A. ZIKRY (USA) .Low-velocity impact damage progression in woven E-glass composite systems[J].Composites, Part A. Applied science and manufacturing,2005(5):658-664. |
| [59] | 温卫东,崔海坡,徐颖.T300/BMP-316复合材料板冲击损伤研究[J].航空动力学报,2007(05):749-754. |
| [60] | Pierre-Luc Vachon;Vladimir Brailovski;Patrick Terriault .Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates[J].Composite structures,2013(Jun.):424-435. |
| [61] | 缝纫对复合材料层合板强度和抗冲击性能的影响[J].航空学报,2000(04):368. |
| [62] | ADANUR S;TSAO Y P;TAM C W .Improving fracture resistance of laminar textile composites by third direction reinforcement[J].Composites Engineering,1995,5(9):1149-1158. |
| [63] | F. Aymerich;P. Priolo .Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading[J].International journal of impact engineering,2008(7):591-608. |
| [64] | K.T. Tan;N. Watanabe;Y. Iwahori .Effect of stitch density and stitch thread thickness on low-velocity impact damage of stitched composites[J].Composites, Part A. Applied science and manufacturing,2010(12):1857-1868. |
| [65] | HULL D.An Introduction to Composite Materials[M].Cambridge:Cambridge University Press,1981 |
| [66] | Tae Jin Kang;Cheol Kim .Energy-absorption mechanisms in Kevlar multiaxial warp-knit fabric composites under impact loading[J].Composites science and technology,2000(5):773-784. |
| [67] | CANTWELL W J;MORTON J .The significance of damage and defects and their detection in composite materials:a review[J].COMPOSITES,1991,27(1):29-42. |
| [68] | Ornaghi Jr., H.L.;Bolner, A.S.;Fiorio, R.;Zattera, A.J.;Amico, S.C. .Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding[J].Journal of Applied Polymer Science,2010(2):887-896. |
| [69] | SONALEE BORAH HAZARIKA;SAAD UDDIN CHOUDHURY;SUJIT SANKAR PANJA .Fabrication and Performance of Hybrid Betel Nut and Jute Fiber Reinforced Epoxy Composite[J].Journal of Polymer Materials,2013(2):213-224. |
| [70] | Fabrizio Sarasini;Jacopo Tirillo;Marco Valente;Luca Ferrante;Salvatore Cioffi;Salvatore Iannace;Luigi Sorrentino .Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties[J].Materials & design,2013(Aug.):290-302. |
| [71] | HOSUR M V;ADBULLAH M;JEELANI S .Studies on the low-velocity impact response of woven hybrid composites[J].Computers & Structures,2005,67(3):253-262. |
| [72] | 熊杰,萧庆亮.铺层混杂对复合材料层压板侵彻性能的影响[J].材料科学与工程学报,2003(02):178-182. |
| [73] | GUSTIN J;JONESON A;MAHINFALAH M .Low velocity impact of combination Kevlar/carbon sandwich composites[J].Computers & Structures,2005,69(4):396-406. |
| [74] | 张明,安学锋,刘立朋,益小苏.航空级复合材料层板的定域相变控制与增韧研究进展[J].中国材料进展,2009(06):13-18. |
| [75] | JORDAN W M;BRADLEY W L;MOULTON R J .Relating resin mechanical properties to composite delamination fracture toughness[J].Journal of Composite Materials,1987,23(9):923-943. |
| [76] | SELA N;ISHAI O .Interlaminar fracture toughness and toughening of laminated composite materials:a review[J].COMPOSITES,1989,20(5):423-435. |
| [77] | GOTTESMAN T;GIRSHOVICH S;DRUKKER E et al.Residual strength of impacted composites:analysis and tests[J].Journal of Composites Technology &-Research,1994,16(3):244-255. |
| [78] | ALVAREZ V;BERNAL C R;FRONTINI P M et al.The influence of matrix chemical structure on the mode Ⅰ and Ⅱ interlaminar fracture toughness of glass-fiber/epoxy composites[J].Polymer Composites,2003,24(1):140-148. |
| [79] | Vasileios M. Drakonakis;Chris N. Velisaris;James C. Seferis .Matrix Hybridization in the Interlayer for Carbon Fiber Reinforced Composites[J].Polymer Composites,2010(11):1965-1976. |
| [80] | Chou I.;Namba K.;Inutake T. .Correlation of damage resistance under low velocity impact and Mode II delamination resistance in CFRP laminates[J].Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials,1999(2):167-176. |
| [81] | 杨玲.碳纤维/环氧复合材料界面优化研究进展[J].高科技纤维与应用,2013(03):39-45. |
| [82] | Park SJ;Seo MK;Lee JR .Roles of interfaces between carbon fibers and epoxy matrix on interlaminar fracture toughness of composites[J].Composite interfaces,2006(2/3):249-267. |
| [83] | BADER M G;BAILEY J E;BELL I .The effect of fibre-matrix interface strength on the impact and fracture properties of carbon-fibre-reinforced epoxy resin composites[J].Journal of Physics D:Applied Physics,1973,6(5):572-586. |
| [84] | 侯满义,李曙林.应力条件下的飞机结构撞击损伤问题研究[J].航空科学技术,2006(1):35-37. |
| [85] | WHITTINGHAM B;MARSHALL I H;MITREVSKI T et al.The response of composite structures with pre-stress subject to low velocity impact damage[J].Computers & Structures,2004,66(1):685-698. |
| [86] | Kur?un, A.;?enel, M. .Investigation of the effect of low-velocity impact on composite plates with preloading[J].Experimental Techniques,2013(6):41-48. |
| [87] | 程小全,寇长河,郦正能.缝合复合材料可用性--环境条件下层合板的冲击后压缩性能[J].材料工程,2004(09):38-41. |
| [88] | 潘文革,矫桂琼,熊伟,管欣,杨杰,赵谋周.二维编织层压板湿热环境下冲击后压缩性能的实验研究[J].航空材料学报,2005(04):40-44. |
| [89] | IBEKWE S I;MENSAH P F;LI G et al.Impact and post impact response of laminated beams at low temperatures[J].Computers & Structures,2007,79(1):12-17. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%