采用流变仪研究了聚硼硅氮烷作为RTM树脂的成型工艺性能,进而采用RTM工艺成型出复合材料坯体,再经过重复的浸渍-常压裂解工艺制备了Cf/SiBCN陶瓷基复合材料,详细研究了RTM成型缺陷对复合材料的厚度、密度以及力学性能等方面的影响.结果表明:聚硼硅氮烷完全满足RTM成型工艺对流变性能的要求;RTM成型缺陷会进一步加剧复合材料的膨胀,使复合材料的厚度明显增大;同时会降低浸渍裂解前期复合材料的密度;最终复合材料的抗弯强度和模量均略有降低.
参考文献
| [1] | R. Naslain .Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview[J].Composites science and technology,2004(2):155-170. |
| [2] | 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(01):24-32. |
| [3] | 李伟,陈朝辉,王松.先进推进系统用主动冷却陶瓷基复合材料结构研究进展[J].材料工程,2012(11):92-96. |
| [4] | 梁春华,李晓欣.先进材料在战斗机发动机上的应用与研究趋势[J].航空材料学报,2012(06):32-36. |
| [5] | 邹世钦,张长瑞,周新贵,曹英斌.连续纤维增强SiCf/SiC陶瓷复合材料的发展[J].材料导报,2003(08):61-64. |
| [6] | 何州文 .陶瓷基复合材料RTM工艺实验与数值模拟[D].西北工业大学,2007. |
| [7] | Hans-Peter Baldus;Martin Jansen .Novel High-Performance Ceramics-Amorphous Inorganic Networks from Molecular Precursors[J].Angewandte Chemie,1997(4):329-343. |
| [8] | HASEGAWA Y .Preparation of polyorganoborosilazanes and conversion into ultra-high-temperature borosiliconcarbonitrides[J].Journal of the Ceramic Society of Japan,2006,114(6):480-486. |
| [9] | ZHANGPF;JIA DC;YANG Z H et al.Progress of anovel non-oxide Si-B-C-N ceramic and its matrix composites[J].Journal of Advanced Ceramics,2012,1(3):157-178. |
| [10] | 李世波,张立同.高温新材料Si（B）CN[J].材料工程,2000(12):39-41. |
| [11] | Riedel R.;Dressler W.;Ruwisch L.;Bill J.;Aldinger F.;Kienzle A. .A SILICOBORON CARBONITRIDE CERAMIC STABLE TO 2,000-DEGREES-C[J].Nature,1996(6594):796-798. |
| [12] | BUTCHEREIT E;NICKEL K G .Precursor derived Si B-C-N ceramics:oxidation kinetics[J].Journal of the American Ceramic Society,2001,84(10):2184-88. |
| [13] | Sea-Hoon Lee;Markus Weinmann;Peter Gerstel .Extraordinary thermal stability of SiC particulate-reinforced polymer-derived Si-B-C-N composites[J].Scripta materialia,2008(6):607-610. |
| [14] | See Hoon Lee;Markus Weinmann;Fritz Aldinger .Processing and properties of C/Si-B-C-N fiber-reinforced ceramic matrix composites prepared by precursor impregnation and pyrolysis[J].Acta materialia,2008(7):1529-1538. |
| [15] | S.-H. Lee;M. Weinmann .C_(fiber)/SiC_(filler)/Si-BC-N_(matrix) composites with extremely high thermal stability[J].Acta materialia,2009(15):4374-4381. |
| [16] | 许亚洪 .RTM工艺用树脂及"离位”RTM技术研究[D].北京:北京航空材料研究院,2003. |
| [17] | NECHANICKY M A;CHEW K W;SELLINGER A et al.α-silicon carbide/β-silicon carbide particulate composites via polymer infiltration and pyrolysis (PIP) processing using polymethylsilane[J].Journal of the European Ceramic Society,2000,20(4):441-451. |
| [18] | Ronald J. Kerans;Randall S. Hay;Triplicane A. Parthasarathy;Michael K. Cinibulk .Interface design for oxidation-resistant ceramic composites[J].Journal of the American Ceramic Society,2002(11):2599-2632. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%