利用场发射扫描电子显微镜(FE-SEM)、高分辨透射电子显微镜(HRTEM)和能谱仪(EDS)等,研究了不同Ti含量的低碳贝氏体钢的显微组织和析出相的成分、尺寸、形貌以及分布等特征.结果表明:在450℃和520℃保温2h,三种实验钢组织为粒状贝氏体.与低Ti实验钢相比,高Ti及Ti-V复合实验钢的屈服强度增加了150MPa以上.高Ti钢中纳米级析出相有两种类型:一种大于15nm的TiC析出相;另一种是在10nm以下,具有面心立方结构的(Ti,Mo)C复合析出相.Ti-V钢基体中存在大量尺寸在10nm以下的(Ti,V,Mo)C复合析出相.
参考文献
| [1] | 赵四新,姚连登.Ti和Nb-Ti微合金化高强钢中Ti的析出行为[J].材料热处理学报,2010(12):71-79. |
| [2] | Chiaki OUCHI .Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Processes[J].ISIJ International,2001(6):542-553. |
| [3] | NOBUO S;SHINJI M;SHIGERU E.Recent development in microstructural control technologies through the thermal-mechanical control process (TMCP) with JFE steel' s high performance plates[J].JFE Technical Report,2008(11):1-6. |
| [4] | 毛新平,孙新军,康永林,林振源.薄板坯连铸连轧Ti微合金化钢的物理冶金学特征[J].金属学报,2006(10):1091-1095. |
| [5] | M. CHARLEUX;W.J. POOLE;M. MILITZER .Precipitation Behavior and Its Effect on Strengthening of an HSLA-Nb/Ti Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(7):1635-1647. |
| [6] | A. Deschamps;F. Danoix;F. De Geuser;T. Epicier;H. Leitner;M. Perez .Low temperature precipitation kinetics of niobium nitride platelets in Fe[J].Materials Letters,2011(14):2265-2268. |
| [7] | Kelvin Y. Xie;Tianxiao Zheng;Julie M. Cairney .Strengthening from Nb-rich clusters in a Nb-microalloyed steel[J].Scripta materialia,2012(9):710-713. |
| [8] | 李静宇,韦弦,于爱民,孙斌,赵贤平.终冷温度对低碳贝氏体钢组织和性能的影响[J].物理测试,2008(06):13-15,20. |
| [9] | 武会宾,尚成嘉,杨善武,侯华兴,马玉璞,于功利.超细化低碳贝氏体钢的回火组织及力学性能[J].金属学报,2004(11):1143-1150. |
| [10] | 雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006 |
| [11] | P. CIZEK;B.P. WYNNE;C.H.J. DAVIES .Effect of Composition and Austenite Deformation on the Transformation Characteristics of Low-Carbon and Ultralow-Carbon Microalloyed Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(5):1331-1349. |
| [12] | LIU W J;JONAS J;BOUCHARD D et al.Gibbs energies of formation of TiS and Ti4C2S2 in austenite[J].ISIJ International,1990,30(11):985-990. |
| [13] | Xinping Mao;Xiangdong Huo;Xinjun Sun;Yizhong Chai .Strengthening mechanisms of a new 700 MPa hot rolled Ti-microalloyed steel produced by compact strip production[J].Journal of Materials Processing Technology,2010(12):1660-1666. |
| [14] | 吴静,张恒华.铌微合金钢析出相的形成与长大规律[J].金属热处理,2011(04):4-7. |
| [15] | 余伟 .针状铁素体管线钢控轧控冷工艺及碳氮化物析出规律研究[D].北京科技大学,2008. |
| [16] | A.J.DeArdo .Microalloyed strip steels for the 21st century[J].Materials Science Forum,1998(0):15-26. |
| [17] | 刘建 .钒氮微合金化对高强度热轧钢板组织与性能的影响[D].昆明:昆明理工大学,2006. |
| [18] | Y. LI;D. N. CROWTHER;R. S. MITCHELL .The Evolution of Microstructure during Thin Slab Direct Rolling Processing in Vanadium Microalloyed Steels[J].ISIJ International,2002(6):636-644. |
| [19] | Hung-Wei Yen;Ching-Yuan Huang;Jer-Ren Yang .Characterization of interphase-precipitated nanometer-sized carbides in a Ti-Mo-bearing steel[J].Scripta materialia,2009(6):616-619. |
| [20] | 焦增宝,刘锦川.新型纳米强化超高强度钢的研究与进展[J].中国材料进展,2011(12):6-11. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%