欢迎登录材料期刊网

材料期刊网

高级检索

采用DSC法和黏度法研究聚硫密封剂室温硫化过程中的反应动力学.在20~40℃,通过非等温和等温DSC实验测量密封剂硫化反应热,得到硫化反应程度和反应速率,经非线性拟合获得了活化能参数、具温度依赖的反应速率常数和反应级数,建立了改进的Kamal动力学模型方程,方程曲线与实验点相吻合,表明密封剂在硫化反应初期(硫化程度α<0.4)具有自催化反应特征,而在后期(α>0.4)受扩散控制.测定了硫化过程中的黏度变化,其与硫化温度和硫化反应程度有关,拟合得到的黏温方程曲线在20~30℃,α<0.4时与实验数据相吻合.

参考文献

[1] E. I. Zaitseva;A. A. Donskoi .Sealants Based on Polysulfide Elastomers[J].Polymer science. Series D,2008(4):289-297.
[2] A.A.Donskoi;G.V.Grigoryan .Polysulfide and Organosilicon Low-Molecular-Mass Rubbers and Sealants on Their Basis[J].Polymer science, Series C,2007(3):279-283.
[3] 刘嘉;苏正涛;栗付平.航空橡胶与密封材料[M].北京:国防工业出版社,2011
[4] LOWE G.B .The cure chemistry of polysulfides[J].International Journal of Adhesion and Adhesives,1997,17:345-348.
[5] 柳莹,吴松华,王景鹤,潘广萍,秦蓬波,宋英红.硬脂酸盐对聚硫橡胶预聚体硫化后性能的影响[J].材料工程,2006(z1):307-309.
[6] 杨亚飞,索军营,章谏正,吴松华.偶联剂对改性聚硫密封剂粘接性能的影响[J].粘接,2011(03):65-67.
[7] 章谏正,秦蓬波,刘刚,吴松华.环氧树脂硫化聚硫醚密封剂的性能研究[J].中国胶粘剂,2011(04):36-39.
[8] Quan YW;He P;Zhou BJ;Chen QM .Modification of polysulfide sealant with polysulfide polythio-urethane-urea[J].Journal of Applied Polymer Science,2007(4):2599-2604.
[9] COATES R J;GILBERT B C;LEE T .EPR-spin-trapping studies of the heterogeneous oxidative curing of some liquid polysulfide polymers:evidence for the mediation of thiyl radicals,disulfide radical-anions and oxygen-centred radicals[J].Journal of the Chemical Society,Perkin Transactions,1992,2(11):1387-1390.
[10] M. R. Kalaee;M. H. N. Famili;H. Mahdavi .Cure Kinetic of Poly (alkyltetrasulfide) Using a Rheological Method[J].Polymer-Plastics Technology and Engineering,2009(4/6):627-632.
[11] Baijie Zhou;Dan He;Yiwu Quan;Qingmin Chen .The Investigation on the Curing Process of Polysulfide Sealant by In Situ Dielectric Analysis[J].Journal of Applied Polymer Science,2012(5):1725-1732.
[12] Lee CL.;Wei KH. .Curing kinetics and viscosity change of a two-part epoxy resin during mold filling in resin-transfer molding process[J].Journal of Applied Polymer Science,2000(10):2139-2148.
[13] Seifi R;Hojjati M .Heat of reaction, cure kinetics, and viscosity of Araldite LY-556 resin[J].Journal of Composite Materials,2005(11):1027-1039.
[14] M Ghaemy;AA Rostami;A Omrani .Isothermal cure kinetics and thermodynamics of an epoxy-nickel-diamine system[J].Polymer international,2006(3):279-284.
[15] KAMAL M R;SOUROUR S .Kinetics and thermal characterization of thermoset cure[J].Polymer Engineering & Science,1973,13(1):59-64.
[16] STOLIN M A;MERZHANOV A G;MALKIN A Y A .Non-isothermal phenomena in polymer engineering and science:a review partⅡ:non-isothermal phenomena in polymer deformation[J].Polymer Engineering & Science,1979,19(15):1074-1080.
[17] DUSI M R;LEE W I;CIRISCIOLI P R et al.Cure kinetics and viscosity of fiberite 976 resin[J].Journal of Composite Materials,1987,21(1):234-261.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%