欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 碳纳米管增强金属基复合材料的研究进展

材料工程, 2015, (10): 91-101. doi: 10.11868/j.issn.1001-4381.2015.10.015

碳纳米管增强金属基复合材料的研究进展

何天兵 1, , 胡仁伟 2, , 何晓磊 3, , 李沛勇 4,

1.北京航空材料研究院,北京,100095

2.总参陆航部装备发展办公室,北京,100082

3.北京航空材料研究院,北京,100095

4.北京航空材料研究院,北京,100095

关键词： 碳纳米管 , 金属基复合材料 , 制备技术 , 分散性 , 界面

Progress in Research on Carbon Nanotube Reinforced Metal Matrix Composites

Keywords： carbon nanotubes (CNTs) , metal matrix composites (MMCs) , processing technique , disper-sion , interface

碳纳米管增强金属基复合材料由于高的比强度、比模量以及优异的热、电性能在航空航天领域具有很好的应用潜力，本文在分析大量文献的基础上，评述该类材料的制备技术和界面研究进展，对其典型性能进行归纳，指出碳纳米管的分散技术以及碳管、基体之间的界面特性应该是今后本领域的重点研究方向。

Carbon nanotube reinforced metal matrix composites (CNT/MMCs)owing to high specific strength and specific elastic modulus as well as exceptional thermal and electrical properties,possess great potential in aerospace applications.Based on the analysis on the published literatures,the pro-cessing techniques and the CNT/metal interface research advances was evaluated,and some typical properties were summarized.It is pointed out that,the dispersion of carbon nanotubes,and interfacial characteristics between CNT and metal matrix would be mainly important research areas in future.

参考文献

[1] POPOV V N .Carbon nanotubes:properties and application[J].Materials Science and Engineering R:Reports,2004,43(03):61-102.
[2] SALVETAT-DELMOTTE J P;RUBIO A .Mechanical proper-ties of carbon nanotubes:a fiber digest for beginners[J].Car-bon,2002,40(10):1729-1734.
[3] XIE X L;MAI Y W;ZHOU X P .Dispersion and alignment of carbon nanotubes in polymer matrix:a review[J].Materials Sci-ence and Engineering R:Reports,2005,49(04):89-112.
[4] Ch. Laurent;E. Flahaut;A. Peigney .The weight and density of carbon nanotubes versus the number of walls and diameter[J].Carbon: An International Journal Sponsored by the American Carbon Society,2010(10):2994-2996.
[5] H. Jiang;B. Liu;Y. Huang .Thermal Expansion of Single Wall Carbon Nanotubes[J].Journal of engineering materials and technology,2004(3):265-270.
[6] BAKSHI S R;LAHIRI D;AGARWAL A .Carbon nanotube re-inforced metal matrix composites-a review[J].International Ma-terials Reviews,2010,55(01):41-64.
[7] KUZUMAKI T;MIYAZAWA K;ICHINOSE H et al.Process-ing of carbon nanotube reinforced aluminum composite[J].Jou-narl of Material Research,1998,13(09):2445-2449.
[8] Rong Zhong;Hongtao Cong;Pengxiang Hou .Fabrication of nano-Al based composites reinforced by single-walled carbon nanotubes[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(4):848-851.
[9] LIAO J Z;TAN M J;SRIDHAR I .Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites[J].Materials and Design,2010,31(Suppl 1):96-100.
[10] 张云鹤;李庚;苗孟河 等.粉末冶金法碳纳米管增强镁基复合材料的微观组织及力学性能[J].复合材料学报,2013,30(增刊 1):102-106.
[11] KONDOH K;FUKUDA H;UMEDA J et al.Microstructural and mechanical analysis of carbon nanotube reinforced magnesi-um alloy powder composites[J].Materials Science and Engi-neering:A,2010,527(16-17):4103-4108.
[12] KONDOH K;THRERUJIRAPAPONG T;IMAI H et al.Characteristics of powder metallurgy pure titanium matrix com-posite reinforced with multi-wall carbon nanotubes[J].Compos-ites Science and Technology,2009,69(07):1077-1081.
[13] SOTOUDEHNIA M M;PA L A .Dispersion of carbon nano-tubes in iron by wet processing for the preparation of iron-carbon nanotube composites[J].Powder Technology,2014,258:1-5.
[14] ESAWI A M K;EL BORADY M A .Carbon nanotube-rein-forced aluminium strips[J].Composites Science and Technolo-gy,2008,68(02):486-492.
[15] 许世娇,肖伯律,刘振宇,王文广,马宗义.高能球磨法制备的碳纳米管增强铝基复合材料的微观组织和力学性能[J].金属学报,2012(07):882-888.
[16] H.J. Choi;G.B. Kwon;G.Y. Lee .Reinforcement with carbon nanotubes in aluminum matrix composites[J].Scripta materialia,2008(3):360-363.
[17] 聂俊辉,张亚丰,史娜,贾成厂.镀钨碳纳米管增强铜基复合材料的制备及性能[J].北京科技大学学报,2012(07):823-829.
[18] SINGHAL S K;PASRICHA R;TEOTIA S et al.Fabrication and characterization of Al-matrix composites reinforced with a-mino-functionalized carbon nanotubes[J].Composites Science and Technology,2011,72(01):103-111.
[19] SINGHAL S K;PASRICHA R;JANGRA M et al.Carbon nanotubes:amino functionalization and its application in the fab-rication of Al-matrix composites[J].Powder Technology,2012,215-216:254-263.
[20] MAQBOOL A;HUSSAIN M A;KHALID F A et al.Me-chanical characterization of copper coated carbon nanotubes rein-forced aluminum matrix composites[J].Materials Characteriza-tion,2013,86:39-48.
[21] HE C N;ZHAO N Q;SHI C S et al.An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing peinforced Al-matrix composites[J].Advanced Mate-rials,2007,19(08):1128-1132.
[22] 李海鹏 .碳纳米管在铝基体上原位合成及其复合材料的组织与性能[D].天津大学,2008.
[23] YANG X D;LIU E Z;SHI C S et al.Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility[J].Journal of Alloys and Compounds,2013,563:216-220.
[24] LI H P;FAN J W;GENG X X et al.Alumina powder assisted carbon nanotubes reinforced Mg matrix composites[J].Materi-als & Design,2014,60:637-642.
[25] Qianqian Li;Andreas Viereckl;Christian A. Rottmair;Robert F. Singer .Improved processing of carbon nanotube/magnesium alloy composites[J].Composites science and technology,2009(7/8):1193-1199.
[26] LI Q Q;ROTTMAIR C A;SINGER R F .CNT reinforced light metal composites produced by melt stirring and by high pressure die casting[J].Composites Science and Technology,2010,70(16):2242-2247.
[27] LIU Shi-ying,GAO Fei-peng,ZHANG Qiong-yuan,ZHU Xue,LI Wen-zhen.Fabrication of carbon nanotubes reinforced AZ91D composites by ultrasonic processing[J].中国有色金属学报（英文版）,2010(07):1222-1227.
[28] ZENG X S;ZHOU G H;XU Q et al.A new technique for dis-persion of carbon nanotube in a metal melt[J].Materials Sci-ence and Engineering:A,2010,527(20):5335-5340.
[29] LI C D;WANG X J;LIU W Q et al.Effect of solidification on microstructures and mechanical properties of carbon nanotubes reinforced magnesium matrix composite[J].Materials & De-sign,2014,58:204-208.
[30] UOZUMI H;KOBAYASHI K;NAKANISHI K et al.Fabri-cation process of carbon nanotube/light metal matrix composites by squeeze casting[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,495(1 -2):282-287.
[31] 周胜名 .碳纳米管增强铝基复合材料的无压渗透法制备及性能研究[D].浙江大学,2009.
[32] AN B G;LI L X;LI H X .Electrodeposition in the Ni-plating bath containing multi-walled carbon nanotubes[J].Materials Chemistry and Physics,2008,110(2-3):481-485.
[33] 陈小华,王健雄,邓福铭,李宏健,王淼,卢筱楠,彭景翠,李文铸.碳纳米管的化学镀镍研究[J].新型炭材料,2000(04):39-43.
[34] CHEN X H;XIA J T;PENG J C et al.Carbon-nanotube met-al-matrix composites prepared by electroless plating[J].Com-posites Science and Technology,2000,60(02):301-306.
[35] Wang F;Arai S;Endo M .Metallization of multi-walled carbon nanotubes with copper by an electroless deposition process[J].Electrochemistry communications,2004(10):1042-1044.
[36] LAHA T;AGARWAL A;MCKECHNIE T et al.Synthesis and characterization of plasma spray formed carbon nanotube re-inforced aluminum composite[J].Materials Science and Engi-neering:A,2004,381(1 -2):249-258.
[37] BAKSHI S R;SINGH V;SEAL S et al.Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spra-ying of spray dried powders[J].Surface and Coatings Technolo-gy,2009,203(10-11):1544-1554.
[38] Bakshi SR;Singh V;Balani K;McCartney DG;Seal S;Agarwal A .Carbon nanotube reinforced aluminum composite coating via cold spraying[J].Surface & Coatings Technology,2008(21):5162-5169.
[39] Seung I. Cha;Kyung T. Kim;Salman N. Arshad;Chan B. Mo;Soon H. Hong .Extraordinary Strengthening Effect of Carbon Nanotubes in Metal-Matrix Nanocomposites Processed by Molecular-Level Mixing[J].Advanced Materials,2005(11):1377-1381.
[40] NAM D H;KIM Y K;CHA S I et al.Effect of CNTs on pre-cipitation hardening behavior of CNT/Al-Cu composites[J].CARBON,2012,50(13):4809-4814.
[41] Toru Noguchi;Akira Magario;Shigeru Fukazawa .Carbon Nanotube/Aluminium Composites with Uniform Dispersion[J].Materials transactions,2004(2):602-604.
[42] Junichi Yuuki;Hansang Kwon;Akira Kawasaki;Akira Magarso;Tom Noguchi;Junichi Beppu;Masayuki Seki .Fabrication of Carbon Nanotube Reinforced Aiuminym Composite by Powder Extrusion Process[J].Materials Science Forum,2007(26):889-892.
[43] Hansang Kwon;Mehdi Estili;Kenta Takagi .Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2009(3):570-577.
[44] Hansang Kwon;Akira Kawasaki .Extrusion of Spark Plasma Sintered Aluminum-Carbon Nanotube Composites at Various Sintering Temperatures[J].Journal of nanoscience and nanotechnology,2009(11):6542-6548.
[45] LIU Q;KE L M;LIU F C et al.Microstructure and mechani-cal property of multi-walled carbon nanotubes reinforced alumi-num matrix composites fabricated by friction stir processing[J].Materials and Design,2013,45:343-348.
[46] MORISADA Y;FUJII H;NAGAOKA T et al.MWCNTs/AZ31 surface composites fabricated by friction stir processing[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2006,419(01):344-348.
[47] LIU Z Y;XIAO B L;WANG W G et al.Singly dispersed car-bon nanotube/aluminum composites fabricated by powder metal-lurgy combined with friction stir processing[J].CARBON,2012,50(05):1843-1852.
[48] IZADI H;GERLICH A P .Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites[J].CARBON,2012,50(12):4744-4749.
[49] 李文龙,夏春,邢丽,柯黎明.搅拌针形状对搅拌摩擦加工制备CNTs/铝基复合材料均匀性的影响[J].材料工程,2014(01):75-78,84.
[50] GEORGE R;KASHYAP K T;RAHUL R et al.Strengthe-ning in carbon nanotube/aluminium (CNT/Al)composites[J].Scripta Materialia,2005,53(10):1159-1163.
[51] Xu C.L.;Wei B.Q.;Ma R.Z;Liang J.;Ma X.K.;Wu D.H. .Fabrication of aluminum-carbon nanotube composites and their electrical properties[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(5):855-858.
[52] Lijie Ci;Zhenyu Ryu;Neng Yun Jin-Phillipp .Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum[J].Acta materialia,2006(20):5367-5375.
[53] ESAWI A M K;MORSI K;SAYED A et al.The influence of carbon nanotube (CNT)morphology and diameter on the pro-cessing and properties of CNT-reinforced aluminium composites[J].Composites Part A:Applied Science and Manufacturing,2011,42(03):234-243.
[54] LI H P;KANG J L;HE C N et al.Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2013,577:120-124.
[55] Srinivasa R. Bakshi;Anup K. Keshri;Virendra Singh .Interface in carbon nanotube reinforced aluminum silicon composites: Thermodynamic analysis and experimental verification[J].Journal of Alloys and Compounds,2009(1/2):207-213.
[56] Song, H.-Y.;Zha, X.-W. .Influence of nickel coating on the interfacial bonding characteristics of carbon nanotube-aluminum composites[J].Computational Materials Science,2010(4):899-903.
[57] FUKUDA H;KONDOH K;UMEDA J et al.Interfacial anal-ysis between Mg matrix and carbon nanotubes in Mg-6wt.% Al alloy matrix composites reinforced with carbon nanotubes[J].Composites Science and Technology,2011,71(05):705-709.
[58] NAI M H;WEI J;GUPTA M .Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites[J].Materials and Design,2014,60:490-495.
[59] KUZUMAKI T;UJIIE O;ICHINOSE H et al.Mechanical characteristics and preparation of carbon nanotube fiber-rein-forced Ti composite[J].Advancde Engineering Materials,2000,2(07):416-418.
[60] NAM D H;CHA S I;LIM B K et al.Synergistic strengthe-ning by load transfer mechanism and grain refinement of CNT/Al-Cu composites[J].CARBON,2012,50(07):2417-2423.
[61] YOO S J;HAN S H;KIM W J .Strength and strain hardening of aluminum matrix composites with randomly dispersed nanom-eter-length fragmented carbon nanotubes[J].Scripta Materia-lia,2013,68(09):711-714.
[62] CHOI H J;MIN B H;SHIN J H et al.Strengthening in nano-structured 2024 aluminum alloy and its composites containing carbon nanotubes[J].Composites Part A:Applied Science and Manufacturing,2011,42(10):1438-1444.
[63] CARREO-MORELLI E;YANG J;COUTEAU E et al.Car-bon nanotube/magnesium composites[J].Physica Status Solidi(A) Applied Research,2004,201(08):R53-R55.
[64] WEI H;LI Z Q;XIONG D B et al.Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy com-posites through a microlaminated architecture design[J].Scrip-ta Materialia,2014,75:30-33.
[65] DENG C F;WANG D Z;ZHANG X X et al.Processing and properties of carbon nanotubes reinforced aluminum composites[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2007,444(1 -2):138-145.
[66] SO K P;JEONG J C;PARK J G et al.SiC formation on car-bon nanotube surface for improving wettability with aluminum[J].Composites Science and Technology,2013,74:6-13.
[67] DONG S R;TU J P;ZHANG X B .An investigation of the slid-ing wear behavior of Cu-matrix composite reinforced by carbon nanotubes[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2001,313(1 -2):83-87.
[68] CHEN W X;TU J P;GAN H Y et al.Electroless preparation and tribological properties of Ni-P-Carbon nanotube composite coatings under lubricated condition[J].Surface and Coatings Technology,2002,160(01):68-73.
[69] W.X. Chen;J.P. Tu;L.Y. Wang;H.Y. Gan;Z.D. Xu;X.B. Zhang .Tribological application of carbon nanotubes in a metal-based composite coating and composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(2):215-222.
[70] 涂江平,朱丽萍,陈卫祥,赵新兵,刘芙,张孝彬.Preparation of Ni-CNT composite coatings on aluminum substrate and its friction and wear behavior[J].中国有色金属学会会刊（英文版）,2004(05):880-884.
[71] ZHOU S M;ZHANG X B;DING Z P et al.Fabrication and tribological properties of carbon nanotubes reinforced Al com-posites prepared by pressureless infiltration technique[J].Com-posites Part A:Applied Science and Manufacturing,2007,38(02):301-306.
[72] Il-Young Kim;Jung-Hee Lee;Gyu-Sun Lee;Seung-Hyun Baik;Young-Jig Kim;Young-Ze Lee .Friction and wear characteristics of the carbon nanotube-aluminum composites with different manufacturing conditions[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2009(Pt.1):593-598.
[73] Y. Tang;H. Cong;R. Zhong .Thermal expansion of a composite of single-walled carbon nanotubes and nanocrystalline aluminum[J].Carbon: An International Journal Sponsored by the American Carbon Society,2004(15):3260-3262.
[74] DENG C F;MA Y X;ZHANG P et al.Thermal expansion be-haviors of aluminum composite reinforced with carbon nanotubes[J].Materials Letters,2008,62(15):2301-2303.
[75] WU J H;ZHANG H L;ZHANG Y et al.Mechanical and thermal properties of carbon nanotube/aluminum composites consolidated by spark plasma sintering[J].Materials and Design,2012,41:344-348.
[76] CHO S;KIKUCHI K;KAWASAKI A .On the role of amor-phous intergranular and interfacial layers in the thermal conduc-tivity of a multi-walled carbon nanotube-copper matrix composite[J].Acta Materialia,2012,60(02):726-736.
[77] AN Z L;TODA M;ONO T .Improved thermal interface prop-erty of carbon nanotube Cu composite based on supercritical fluid deposition[J].CARBON,2014,75:281-288.
[78] FRANK S;PONCHARAL P;WANG Z L et al.Carbon nano-tube quantum resistors[J].SCIENCE,1998,280(5370):1744-1746.
[79] WEI B Q;VAJTAI R;AJAYAN P M .Reliability and current carrying capacity of carbon nanotubes[J].Applied Physics Let-ters,2001,79(08):1172-1174.
[80] EBBESEN T W;LEZEC H J;HIURA H et al.Electrical con-ductivity of individual carbon nanotubes[J].NATURE,1996,382:54-56.
[81] 吴琼,贾成厂,聂俊辉.镀W碳纳米管增强Mg基复合材料的力学和电学性能[J].粉末冶金技术,2012(03):171-176.
[82] YANG Y L;WANG Y D;REN Y et al.Single-walled carbon nanotube-reinforced copper composite coatings prepared by elec-trodeposition under ultrasonic field[J].Materials Letters,2008,62(01):47-50.
[83] X. ZHOU;E. SHIN;K.W. WANG .Interfacial damping characteristics of carbon nanotube-based composites[J].Composites science and technology,2004(15):2425-2437.
[84] 尹志新,王庆慧,覃桂萍,侯丽丽.多壁碳纳米管/氧化铝混杂增强铝基复合材料的阻尼特性研究[J].材料导报,2010(z2):174-176.
[85] C.F. Deng;D.Z. Wang;X.X. Zhang .Damping characteristics of carbon nanotube reinforced aluminum composite[J].Materials Letters,2007(14/15):3229-3231.
[86] 杨春巍,胡信国,张亮,戴长松.多壁碳纳米管的超声处理对PtRu/MWCNTs电催化性能的影响[J].材料工程,2008(07):79-82,87.
[87] 冒丽,吴华强,张宁,李明明,李亭亭,夏玲玲.微波法制备组成可控Cu1-xNix/MWCNTs复合材料及其磁性能[J].材料工程,2013(10):93-97.
[88] YUAN J G;ZHU Y F;LI Y et al.Effect of multi-wall carbon nanotubes supported palladium addition on hydrogen storage properties of magnesium hydride[J].International Journal of Hydrogen Energy,2014,39(19):10184-10194.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net