综述了国内外封严涂层的研究现状,介绍了航空发动机封严涂层的结构和应用特点,重点讨论了可磨耗封严涂层性能评价和技术研究现状.比较了各种涂层材料、评价方法的优势与不足,指出了可磨耗封严涂层的应用潜力及研究发展方向.提出了我国在可磨耗封严涂层技术研究及性能评价方面今后的发展方向,即涂层制备方法、结构研究、高温涂层研究和仿真技术等.
The general situations of abradable coating in China and abroad were reviewed in this re-search,and the structure and application features of abradable coating in aeroengine were also intro-duced.The performance evaluation and technological researches of abradable coating were empha-sized,too.The advantages and disadvantages of different abradable coatings and evaluation methods were compared.The application prospects and future research directions were put forward and clari-fied.The further focused research directions of both the abradable coating technological research and performance evaluations in China were declared,the study on coating preparation,structure of the coating,high temperature coating research and simulation technology need further development.
参考文献
| [1] | 朱立群;刘孟兰;王建华;李雪源;沈德逵;宋定宇.飞机发动机封严涂层的研究[J].航空学报,2000(Z1):85-89. |
| [2] | 田晔;张淑婷;马江虹;谢建刚.可磨耗封严涂层发展及应用[J].有色金属（冶炼部分）,2006(z1):96-99. |
| [3] | 刘夙伟 .涡扇压气机封严涂层高速刮擦可刮削性判据的探讨[D].中国科学院研究生院,2010. |
| [4] | 郝兵;李成刚.表面涂层技术在航空发动机上的应用[J].航空发动机,2004(4):38-40. |
| [5] | 孙勇汉;张斌;陈礼顺.航空发动机涂层技术研究及进展[J].航空制造技术,2013(9):84-87. |
| [6] | Canan U. Hardwicke;Yuk-Chiu Lau.Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review[J].Journal of Thermal Spray Technology,20135(5):564-576. |
| [7] | 沈虹;郑天慧;陈玉洁.航空发动机封严技术的进展[J].燃气涡轮试验与研究,2011(4):51-55. |
| [8] | 刘伟;周奎;杜令忠;张伟刚.可磨耗封严涂层的摩擦磨损和抗冲蚀性能[J].热喷涂技术,2012(4):34-37,41. |
| [9] | Raymond E. Chupp;Farshad Ghasripoor;Norman A. Turnquist;Mehmet Demiroglu;Mahmut F. Aksit.Advanced Seals for Industrial Turbine Applications: Dynamic Seal Development[J].Journal of Propulsion & Power,20026(6):1260-1266. |
| [10] | 王斌利;周莉;黄宝庆.高温可磨耗复合梯度涂层喷涂工艺研究[J].热喷涂技术,2011(4):22-27. |
| [11] | 何勇.聚苯脂铝硅涂层在航空发动机上的应用与研究[J].表面工程,1995(02):14. |
| [12] | 王月 .铝硅封严涂层热稳失效机理分析[D].天津大学,2009. |
| [13] | 尹春雷;陈美英;占佳;陈舒予.可磨耗封严涂层研究进展[J].航空制造技术,2008(20):92-94. |
| [14] | 谷月;田晔;常新春;侯万良.喷涂工艺参数对可磨耗封严涂层的组织与性能的影响研究[J].材料导报,2008(z1):418-419,428. |
| [15] | 赵丹;赵忠兴;杨景伟;孙杰.封严涂层的性能评价及研究进展[J].航空科学技术,2011(4):17-20. |
| [16] | 杨晓剑;田晔;黄新春;章德铭.火焰喷涂镍/石墨可磨耗封严涂层的研究[J].有色金属（冶炼部分）,2008(z1):92-94. |
| [17] | 赵丹 .不同金属基体封严涂层的制备与性能研究[D].沈阳理工大学,2012. |
| [18] | 杨伟华.MCrAlYs高温封严涂层制备工艺的优化及其性能[J].中国表面工程,2012(6):68-72. |
| [19] | 程旭东;高忠宝;李其连;肖巍;闵捷.高温封严涂层材料的基本性能研究与评价[J].表面技术,2008(4):21-22. |
| [20] | 樊自拴;孙冬柏;俞宏英;李辉勤;孟惠民;张济山;乔力杰.超音速火焰喷涂技术研究进展[J].材料保护,2004(9):33-35. |
| [21] | 王洪涛 .镁合金表面热喷涂法制备耐蚀耐磨涂层性能研究[D].河北工业大学,2008. |
| [22] | M. H. Enayati;F. Karimzadeh;M. Tavoosi;B. Movahedi;A. Tahvilian.Nanocrystalline NiAl Coating Prepared by HVOF Thermal Spraying[J].Journal of Thermal Spray Technology,20113(3):440-446. |
| [23] | Maozhong Yi;Jiawen He;Baiyun Huang;Huijiu Zhou.Friction and wear behaviour and abradability of abradable seal coating[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,19991(1):47-53. |
| [24] | 易茂中;张先龙;何家文.可磨耗封严涂层抗冲蚀性与试验参数的关系[J].航空工程与维修,1999(2):16-18. |
| [25] | 高禩洋;刘夙伟;李曙;刘阳.单摆冲击划痕法对封严涂层耐磨性的评价[J].摩擦学学报,2010(4):385-391. |
| [26] | 冲击刮削法评价封严涂层的可磨耗性[J].航空学报,1999(03):249. |
| [27] | 易茂中;黄伯云;何家文;周惠久.可磨耗封严涂层的冲蚀磨损特性及模型[J].航空学报,1998(5):546-552. |
| [28] | Yi Maozhong;Huang Baiyun;He Jiawen.Erosion wear behaviour and model of abradable seal coating[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20021/2(1/2):9-15. |
| [29] | 陈亚军;王志平;丁坤英.等离子喷涂铝硅聚苯酯封严涂层的组织及抗冲蚀性能[J].材料保护,2010(3):7-10. |
| [30] | K. Shimizu;T. Noguchi;H. Seitoh;M. Okada;Y. Matsubara.FEM analysis of erosive wear[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20011(1):779-784. |
| [31] | M. S. ElTobgy;E. Ng;M. A. Elbestawi.Finite element modeling of erosive wear[J].International Journal of Machine Tools & Manufacture: Design, research and application,200511(11):1337-1346. |
| [32] | Yu-Fei Wang;Zhen-Guo Yang.Finite element model of erosive wear on ductile and brittle materials[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20085/6(5/6):871-878. |
| [33] | 杨班权;陈光南;张坤;罗耕星;肖京华.涂层/基体材料界面结合强度测量方法的现状与展望[J].力学进展,2007(1):67-79. |
| [34] | Changjin Xie;Wei Tong.Cracking and decohesion of a thin A1_2O_3 film on a ductile Al-5 percent Mg substrate[J].Acta materialia,20052(2):477-485. |
| [35] | B. F. Chen;J. Hwang;G. P. Yu;J. H. Huang.In situ observation of the cracking behavior of TiN coating on 304 stainless steel subjected to tensile strain[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,199912(12):173-178. |
| [36] | Shieu FS.;Shiao MH..MEASUREMENT OF THE INTERFACIAL MECHANICAL PROPERTIES OF A THIN CERAMIC COATING ON DUCTILE SUBSTRATES[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,19971(1):124-129. |
| [37] | 杨金霞;崔振铎;魏强;杨贤金.基体拉伸法测试二氧化钛薄膜界面结合强度[J].功能材料,2006(12):1923-1925. |
| [38] | Markus P.K. Turunen;Pekka Marjamaeki;Matti Paajanen;Jouko Lahtinen;Jorma K. Kivilahti.Pull-off test in the assessment of adhesion at printed wiring board metallisation/epoxy interface[J].Microelectronics and reliability,20046(6):993-1007. |
| [39] | Kohl James G.;Singer Irwin L..Pull-off behavior of epoxy bonded to silicone duplex coatings[J].Progress in Organic Coatings: An International Review Journal,19991(1):15-20. |
| [40] | 章德铭;任先京;腾佰秋;于月光;王刚.可磨耗封严涂层性能评价技术研究进展[J].热喷涂技术,2009(2):19-22. |
| [41] | 易茂中;胡奈赛;何家文;戴耀.涂层压入仪的研制及其应用[J].仪器仪表学报,2000(2):180-185. |
| [42] | 陈礼顺;张斌;蔡元钢.热喷涂涂层在航空发动机上的应用及发展[J].航空制造技术,2011(11):34-37. |
| [43] | Svenja Ebert;Robert Miicke;Daniel Mack.Failure mechanisms of magnesia alumina spinel abradable coatings under thermal cyclic loading[J].Journal of the European Ceramic Society,201315/16(15/16):3335-3343. |
| [44] | Tsui YC.;Clyne TW..AN ANALYTICAL MODEL FOR PREDICTING RESIDUAL STRESSES IN PROGRESSIVELY DEPOSITED COATINGS .1. PLANAR GEOMETRY[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,19971(1):23-33. |
| [45] | R. E. Johnston.The Sensitivity of Abradable Coating Residual Stresses to Varying Material Properties[J].Journal of Thermal Spray Technology,20095/6(5/6):1004-1013. |
| [46] | 田晔;马江虹;薛文涛;刘建平.等离子喷涂镍基封严涂层热性能的研究[J].有色金属（冶炼部分）,2008(z1):95-97. |
| [47] | 吴迪 .等离子喷涂Al/BN可磨耗封严涂层孔隙状况超声表征[D].大连理工大学,2013. |
| [48] | 戴赫;汪礼敏;张佳萍;王璐;杨中元;张景怀;林锋.新型高温隔热可磨耗封严涂层研究及展望[J].材料导报,2008(7):18-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%