欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 环氧树脂及其复合材料微波固化研究进展

材料工程, 2016, 44(8): 111-120. doi: 10.11868/j.issn.1001-4381.2016.08.018

环氧树脂及其复合材料微波固化研究进展

徐学宏 1, , 王小群 2, , 闫超 3, , 王旭 4,

1.北京航空航天大学材料科学与工程学院,北京,100191

2.北京航空航天大学材料科学与工程学院,北京,100191

3.上海飞机制造有限公司,上海,200436

4.上海飞机制造有限公司,上海,200436

基金项目:   国家商用飞机制造工程技术研究中心创新基金资助(S A M C12-JS-15-015)  

关键词： 环氧树脂 , 复合材料 , 微波固化 , 力学性能 , 热性能

Research Progress on Microwave Curing of Epoxy Resin and Its Composites

Keywords： epoxy resin , composite , microwave curing , mechanical property , thermal property

在介绍微波固化技术的原理及其优点的基础上，综述了环氧树脂及其复合材料的微波固化研究进展，重点讨论了微波固化对环氧树脂及其复合材料固化体系的固化速率、固化产物力学性能和热性能的影响，介绍了颗粒增强环氧树脂和纤维增强环氧树脂两种适合微波固化的复合材料系及工业应用关键技术问题，并对环氧树脂及其复合材料微波固化的应用前景进行了展望。

Research progress of microwave curing on epoxy resin and its composites was summarized on the basis of introducing the principle of microwave curing technology and its advantages .The paper focused on the effect of microwave curing on the curing rate of epoxy resin and its composites as well as the mechanical and thermal properties of cured products .Two suitable composite systems for wave curing of powder‐strengthened epoxy and fiber‐strengthened epoxy and a few key technological prob‐lems for industrial application are introduced .The application prospect of microwave curing on epoxy resin and its composites was also presented .

参考文献

[1] 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12.
[2] 益小苏;张明;安学锋;刘立朋.先进航空树脂基复合材料研究与应用进展[J].工程塑料应用,2009(10):72-76.
[3] 初琳;赵晓莉;王丽娟.树脂基复合材料固化技术发展现状[J].化工装备技术,2013(1):43-46.
[4] 孙晓峰;马世宁;朱乃姝;胡春华.环氧树脂胶粘剂微波固化研究[J].中国工程机械学报,2010(1):107-110.
[5] Boey FYC.;Yap BH..Microwave curing of an epoxy-amine system: effect of curing agent on the glass-transition temperature[J].Polymer Testing,20018(8):837-845.
[6] 刘学清;王源升.微波固化环氧树脂（E44/DDM）的热性能及膨胀性能[J].高分子材料科学与工程,2004(3):111-113,117.
[7] 孙涛;常新龙;赖建伟;方鹏亚.不同固化方式下环氧树脂体系固化行为及力学性能研究[J].固体火箭技术,2012(5):679-682,687.
[8] Alazard P.;Palumbo M.;Gourdenne A..Curing under continuous microwaves (2 450 MHz) of thermosetting epoxy prepolymers: Final statement[J].Macromolecular symposia,20030(0):59-72.
[9] 谷晓昱;张军营.微波固化环氧树脂中非热效应的研究[J].高分子材料科学与工程,2006(3):183-186.
[10] 任重远.热固性树脂的微波固化[J].热固性树脂,1995(03):38.
[11] 宋世红;穆中国.环氧树脂/DMP30体系的微波固化及性能研究[J].中国胶粘剂,2008(6):27-30.
[12] 吴轲;张炜;曾金芳.微波固化环氧/酸酐体系的研究[J].固体火箭技术,2002(2):74-76.
[13] Jian Zhou;Chun Shi;Bingchu Mei.Research on the technology and the mechanical properties of the microwave processing of polymer[J].Journal of Materials Processing Technology,20031/3(1/3):156-158.
[14] Tanrattanakul V;SaeTiaw K.Comparison of microwave and thermal cure of epoxy-anhydride resins: Mechanical properties and dynamic characteristics[J].Journal of Applied Polymer Science,20054(4):1442-1461.
[15] 钟发春;贺江平;王晓川;赵小东;张晓华.微波固化环氧泡沫材料的结构和性能研究[J].材料导报,2006(8):149-151.
[16] 耿杰;李勇;陈云雷;肖军;周克印.环氧树脂聚酰胺体系微波固化特性研究[J].玻璃钢/复合材料,2013(5):7-13.
[17] Navabpour P;Nesbitt A;Mann T;Day RJ.Comparison of the curing kinetics of a DGEBA/acid anhydride epoxy resin system using differential scanning calorimetry and a microwave-heated calorimeter[J].Journal of Applied Polymer Science,20073(3):2054-2063.
[18] Wallace M;Attwood D;Day RJ;Heatley F.Investigation of the microwave curing of the PR500 epoxy resin system[J].Journal of Materials Science,200618(18):5862-5869.
[19] Guido Saccone;Eugenio Amendola;Domenico Acierno.CONVENTIONAL AND MICROWAVE CURING PROCESS OF EPOXY SYSTEMS: KINETIC ANALYSIS AND CHARACTERIZATION[J].Microwave and optical technology letters,200911(11):2777-2783.
[20] Navabpour P;Nesbitt A;Degamber B;Fernando G;Mann T;Day R.Comparison of the curing kinetics of the RTM6 epoxy resin system using differential scanning calorimetry and a microwave-heated calorimeter[J].Journal of Applied Polymer Science,20066(6):3658-3668.
[21] David J. T. Hill;Graeme A. George;David G. Gogers.A systematic study of the microwave and thermal cure kinetics of the DGEBA/DDS and DGEBA/DDM epoxy-amine resin systems[J].Polymers for advanced technologies,20025(5):353-362.
[22] Zong LM;Kempel LC;Hawley MC.Dielectric studies of three epoxy resin systems during microwave cure[J].Polymer: The International Journal for the Science and Technology of Polymers,20058(8):2638-2645.
[23] Fu B.;Hawley MC..Comparative study of continuous-power and pulsed-power microwave curing of epoxy resins[J].Polymer engineering and science,200010(10):2133-2143.
[24] Rao S;Rao RMVGK.Cure studies on bifunctional epoxy matrices using a domestic microwave oven[J].Polymer Testing,20085(5):645-652.
[25] Thostenson E.T.;Chou T.-W..Microwave processing:fundamentals and applications[J].Composites, Part A. Applied science and manufacturing,19999(9):1055-1071.
[26] 张宗华;刘刚;张晖;张忠;王小群.纳米氧化铝颗粒对高性能环氧树脂玻璃化转变温度的影响[J].材料工程,2014(9):39-44.
[27] P.K.D.V;Yarlagadda.STUDY ON MICROWAVE DIELECTRIC PROPERTIES OF EPOXYRESIN MIXTURES USED FOR RAPID PRODUCT DEVELOPMENT[J].金属学报(英文版),2001(01):1-12.
[28] 欧忠文;白敏;陈云;陈乔;陈寒斌.纳米银对环氧树脂的增韧改性及其微波固化行为[J].稀有金属材料与工程,2012(4):649-652.
[29] 孙晓峰;马世宁;朱乃姝;钱海峰;胡春华.纳米微波吸收剂对改性环氧胶粘剂微波固化性能的影响[J].郑州大学学报(工学版),2008(4):14-16.
[30] V.K. Rangari;M.S. Bhuyan;S. Jeelani.Microwave curing of CNFs/EPON-862 nanocomposites and their thermal and mechanical properties[J].Composites, Part A. Applied science and manufacturing,20117(7):849-858.
[31] Vijaya K. Rangari;Mohammad S. Bhuyan;Shaik Jeelani.Microwave processing and characterization of EPON 862/CNT nanocomposites[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,20101/3(1/3):117-121.
[32] Fotiou, I.;Baltopoulos, A.;Vavouliotis, A.;Kostopoulos, V..Microwave curing of epoxy polymers reinforced with carbon nanotubes[J].Journal of Applied Polymer Science,20135(5):2754-2764.
[33] Uyanik N;Erdem AR;Can MF;Celik MS.Epoxy nanocomposites curing by microwaves[J].Polymer engineering and science,20068(8):1104-1110.
[34] T. Chaowasakoo;N. Sombatsompop.Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods[J].Composites science and technology,200711/12(11/12):2282-2291.
[35] 刘学清;王源升.微波固化环氧树脂/SiO2复合材料及其性能的研究[J].热固性树脂,2003(2):8-11.
[36] ERIK T.THOSTENSON;TSU-WEI CHOU.Microwave and Conventional Curing of Thick-Section Thermoset Composite Laminates: Experiment and Simulation[J].Polymer Composites,20012(2):197-212.
[37] Rao RMVGK;Rao S.Studies on tensile and interlaminar shear strength properties of thermally cured and microwave cured glass-epoxy composites[J].Journal of Reinforced Plastics and Composites,20067(7):783-795.
[38] Tartrattanakul V;Jaroendee D.Comparison between microwave and thermal curing of glass fiber-epoxy composites: Effect of microwave-heating cycle on mechanical properties[J].Journal of Applied Polymer Science,20062(2):1059-1070.
[39] Mooteri PS;Sridhara BK;Rao S;Prakash MR;Rao RMVGK.Studies on mechanical behavior of microwave and thermally cured glass fiber reinforced polymer composites[J].Journal of Reinforced Plastics and Composites,20065(5):503-512.
[40] Nikki Sgriccia;M. C. Hawley.Thermal, morphological, and electrical characterization of microwave processed natural fiber composites[J].Composites science and technology,20079(9):1986-1991.
[41] 陈名华;姚武文;王新坤;陈义参;葛文军.微波固化碳纤维/环氧树脂胶的研究[J].粘接,2005(6):13-15.
[42] D.A. Papargyris;R.J. Day;A. Nesbitt;D. Bakavos.Comparison of the mechanical and physical properties of a carbon fibre epoxy composite manufactured by resin transfer moulding using conventional and microwave heating[J].Composites science and technology,20087/8(7/8):1854-1861.
[43] 陈萍;徐学宏;李振忠;闫超;王世杰;王小群.一种碳纤维/环氧预浸料的微波固化特性及其层合板的微波固化工艺研究[J].材料工程,2016(4):45-50.
[44] 朱乃姝;马世宁;孙晓峰;樊雪峰.固化方式和纤维表面处理对碳纤维-树脂界面化学组成的影响[J].中国工程机械学报,2010(1):111-114.
[45] 孙晓峰;马世宁;朱乃姝;钱海峰;胡春华.微波固化改性环氧树脂/碳纤维复合材料研究[J].材料工程,2008(z1):190-193,198.
[46] C. Nightingale;R. J. Day.Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiation[J].Composites, Part A. Applied science and manufacturing,20027(7):1021-1030.
[47] Nanya Li;Yingguang Li;Xiang Hang;James Gao.Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing process[J].Journal of Materials Processing Technology,20143(3):544-550.
[48] Boey FYC..HUMIDITY AND AUTOCLAVE PRESSURE EFFECT ON THE INTERFACIAL SHEAR STRENGTH OF A MICROWAVE CURED EPOXY-GLASS FIBRE COMPOSITE[J].Polymer Testing,19955(5):471-477.
[49] Lambert E. Feher;Manfred K. Thumm.Microwave Innovation for Industrial Composite Fabrication - The HEPHAISTOS Technology[J].IEEE Transactions on Plasma Science,20041(1):73-79.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net