S iC纤维增强金属基复合材料具有高的比强度、比刚度、耐腐蚀、耐高温等优异的综合性能，在实际应用中具有广阔的前景。本文主要总结了S iC纤维增强金属基复合材料的研究进展，分别阐述了S iC纤维增强铝基、钛基、铜基、镍基复合材料存在的问题、解决办法及应用现状。最后指出了限制复合材料实际应用的几点因素，包括：成本问题、界面问题、各向异性以及缺少质量检测评估体系。
Metal matrix composites ,reinforced with continuous SiC fiber ,offer attractive combinations of high specific strength ,specific stiffness and elevated temperature performance and are currently be‐ing considered for a range of broad prospective applications .T he recent research development on SiC fiber reinforced metal matrix composite was reviewed .The key problems ,solutions and application of SiC/Al ,SiC/Ti ,SiC/Cu ,SiC/Ni composites were summarized separately .Finally ,the limiting fac‐tors in the application of the metal matrix composites were point out :cost issues ,interfacial prob‐lems ,anisotropy of composites and lack of systematic quality estimate .
参考文献
| [1] | 于琨.金属基复合材料现状与存在的问题[J].材料工程,1992(08):45-46,53. |
| [2] | 刘翠霞;杨延清;徐婷;马志军;陈彦.化学气相沉积法连续SiC纤维的研究现状和发展趋势[J].材料导报,2006(8):35-37,40. |
| [3] | Y. W. Xun;M. J. Tan;J. T. Zhou.Processing and interface stability of SiC fiber reinforced Ti-15V-3Cr matrix composites[J].Journal of Materials Processing Technology,20001/3(1/3):215-220. |
| [4] | Y.C. Fu;N.L. Shi;D.Z. Zhang;R. Yang.Effect of C coating on the interfacial microstructure and properties of SiC fiber-reinforced Ti matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20061/2(1/2):278-282. |
| [5] | Liu YN.;Kang W.;He JW.;Zhu ZM..Fragmentation study of interfacial shear strength of single SiC fiber reinforced Al after fatigue[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20031/2(1/2):243-250. |
| [6] | Brendel, A;Popescu, C;Schurmann, H;Bolt, H.Interface modification of SiC-fibre/copper matrix composites by applying a titanium interlayer[J].Surface & Coatings Technology,20051/4(1/4):161-164. |
| [7] | 冯春祥;薛金根;宋永才.SiC纤维研究进展[J].高科技纤维与应用,2003(1):15-19. |
| [8] | 李雪成;杨延清;张荣军;罗贤;刘翠霞.CVD法SiC纤维的涂层研究[J].中国材料进展,2010(3):33-38. |
| [9] | 王涛;赵宇新;付书红;张勇;曾维虎;韦家虎;李钊.连续纤维增强金属基复合材料的研制进展及关键问题[J].航空材料学报,2013(2):87-96. |
| [10] | 毛小南;张鹏省;于兰兰;袁少冲;赵永庆.纤维增强钛基复合材料研究新进展[J].稀有金属快报,2005(5):1-7. |
| [11] | Ward-Close CM;Robertson JG;Godfrey SP;Murgatroyde DP;Chandrasekaran L.Advances in the fabrication of titanium metal matrix composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19992(2):314-318. |
| [12] | SiC纤维增强钛基复合材料研究进展[J].钛工业进展,2005(05):32-36. |
| [13] | 冀鸰;王玉敏;石南林.近熔态扩散新工艺制备SiC纤维增强Al基复合材料的界面分析[J].材料工程,2009(6):46-50. |
| [14] | 朱祖铭;郭延风;石南林;朱桂秋;冯纪伟.双涂层和梯度涂层改善SiCf/Al界面性能的微观机制[J].材料研究学报,2002(1):67-73. |
| [15] | 刘连涛;孙勇.纤维增强铝基复合材料研究进展[J].南方金属,2008(6):1-4,47. |
| [16] | Yun Lu;Liang Hao;Fusheng Pan.A study of the residual stress and its influence on tensile behaviors of fiber-reinforced SiC/Al composite[J].Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials,20134(4):255-263. |
| [17] | LIANG-GUANG CHEN;SU-JIEN LIN;SHOU-YI CHANG.Analysis of Interfacial Shear Strength of SiC Fiber Reinforced 7075 Aluminum Composite by Pushout Microindentation[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20057(7):1937-1945. |
| [18] | The fibre/matrix interface and its influence on mechanical and physical properties of Cu-MMC[J].Composites science and technology,20109(9):P.1321. |
| [19] | Xian Luo;Yanqing Yang;Jiankang Li.Effect of nickel on the interface and mechanical properties of SiC_f/Cu composites[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20091/2(1/2):237-243. |
| [20] | Luo Xian;Yang Yanqing;Li Jiankang.The effect of fabrication processes on the mechanical and interfacial properties of SiC_f/Cu-matrix composites[J].Composites, Part A. Applied science and manufacturing,200710(10):2102-2108. |
| [21] | Kimmig, S.;Elgeti, S.;You, J.-H..Impact of long-term thermal exposure on a SiC fiber-reinforced copper matrix composite[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,20131/3(1/3):386-392. |
| [22] | S. Kimmig;I. Allen;J.H. You.Strength and conductivity of unidirectional copper composites reinforced by continuous SiC fibers[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,20131/3(1/3):272-277. |
| [23] | 杨延清;朱艳;陈彦;张清贵;张建民.SiC纤维增强Ti基复合材料的制备及性能[J].稀有金属材料与工程,2002(3):201-204. |
| [24] | 蔡杉;佘冬苓;董研;李占一.SiCf/Ti复合材料的研制[J].材料工程,2002(6):14-17. |
| [25] | 冯广海;杨延清;罗贤;娄菊红;李茂华;谢黎雄.SiC纤维增强Ti基复合材料疲劳研究进展[J].稀有金属材料与工程,2013(1):215-220. |
| [26] | 张国乾;赵明;陆山;章胜;商体松.航空发动机整体叶环结构的研究进展[J].航空制造技术,2013(9):50-54. |
| [27] | 傅恒志.未来航空发动机材料面临的挑战与发展趋向[J].航空材料学报,1998(04):52. |
| [28] | Nicolas Carrere;Frederic Feyel;Serge Kruch.Multi-scale modelling of silicon carbide reinforced titanium MMCs: Application to advanced compressor design[J].Aerospace science and technology,20034(4):307-315. |
| [29] | L(U) Xiang-hong;YANG Yan-qing;HUANG Bin;LUO Xian;LIU Yu-cheng.Reaction diffusion in continuous SiC fiber reinforced Ti matrix composite[J].中国有色金属学会会刊(英文版),2007(01):27-34. |
| [30] | W. Zhang;Y.Q. Yang;G.M. Zhao.Investigation of interfacial reaction in SiC fiber reinforced Ti-43Al-9V composites[J].Intermetallics,2013:54-59. |
| [31] | 蔡杉;李占一;董妍;颜鸣皋.SiC纤维CVD涂层工艺研究[J].航空材料学报,2006(2):23-28. |
| [32] | 张伟;杨延清;郭秀乔;罗贤;赵光明;黄斌.SiCf/Ti-43Al-9V复合材料的基体微观组织[J].稀有金属材料与工程,2013(8):1726-1729. |
| [33] | 葛长闯;曹航;伊锋.纤维增强整体叶环/盘强度问题分析[J].航空发动机,2013(4):45-50. |
| [34] | L(U) Xiang-hong;YANG Yan-qing;MA Zhi-jun;LIU Cui-xia;CHEN Yan;AI Yun-long.Kinetics and mechanism of interfacial reaction in SCS-6 SiC continuous fiber-reinforced Ti-Al intermetallic matrix composites[J].中国有色金属学会会刊（英文版）,2006(01):77-83. |
| [35] | Fujimura T;Tanaka S-I.In situ high temperature x-ray diffraction study of Ni/SiC interface reactions[J].Journal of Materials Science,19992(2):235-239. |
| [36] | Park JS;Perepezko JH;Landry K.Kinetic control of silicon carbide/metal reactions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,19992(2):279-286. |
| [37] | 黄旭;李臻熙;黄浩.高推重比航空发动机用新型高温钛合金研究进展[J].中国材料进展,2011(6):21-27. |
| [38] | 王玉敏;肖鹏;石南林;雷家峰;杨锐.SiC纤维增强钛基复合材料界面研究及构件研制[J].中国材料进展,2010(5):9-13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%