运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态Ni-P合金镀层在20℃/min加热速率下的热效应和质量变化.在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征.结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好.
参考文献
| [1] | 胡振峰;吕镖;汪笑鹤;徐滨士.相对运动速度对电刷镀镍镀层组织结构和性能的影响[J].材料工程,2014(5):12-16. |
| [2] | 郭瑞;梁波;赵晓兵;杨英春;季珩;郑学斌.等离子喷涂Al2O3涂层的电击穿机理[J].航空材料学报,2014(5):43-48. |
| [3] | 李静;张金栋;张玉忠;关振威;王智勇;肇研;丁鹤雁.耐高温抗激光烧蚀涂层研制与性能表征[J].航空材料学报,2014(1):34-38. |
| [4] | H.B. LEE;D.S. WUU;C.Y. LEE.Study of the Corrosion Behavior of Nanocrystalline Ni-P Electrodeposited Coating[J].Metallurgical and Materials Transactions. A, physical metallurgy and materials science,20102(2):450-459. |
| [5] | Yonezu, A.;Niwa, M.;Ye, J.;Chen, X..Contact fracture mechanism of electroplated Ni-P coating upon stainless steel substrate[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:184-192. |
| [6] | Keong KG.;Sha W.;Malinov S..Hardness evolution of electroless nickel-phosphorus deposits with thermal processing[J].Surface & Coatings Technology,20032/3(2/3):263-274. |
| [7] | LI Zhiming;QIAN Shiqiang;WANG Wei;SHEN Hongwei;LONG Hesun.High-temperature tribological properties of Ni-P alloy coatings deposited by electro-brush plating[J].稀有金属（英文版）,2011(06):669-675. |
| [8] | 王玉;郭金彪;俞宏英;孙冬柏;李辉勤.电沉积非晶态镍磷镀层的结构及晶化过程[J].材料热处理学报,2009(1):145-148,160. |
| [9] | 金世伟;康敏;王颖;陈超;邵越.电沉积时间对 Ni-P 合金镀层性能的影响[J].有色金属工程,2014(3):27-29,35. |
| [10] | Zangeneh-Madar K;Vaghefi SMM.The effect of thermochemical treatment on the structure and hardness of electroless Ni-P coated low alloy steel[J].Surface & Coatings Technology,20041(1):65-71. |
| [11] | Lingchuan Li;Yi Zhang;Shuang Deng;Yanli Chen.Effect of ammonium on low-temperature electrodeposition of Ni―P alloys[J].Materials Letters,200322/23(22/23):3444-3448. |
| [12] | A. Zoikis-Karathanasis;E.A. Pavlatou;N. Spyrellis.Pulse electrodeposition of Ni-P matrix composite coatings reinforced by SiC particles[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20101/2(1/2):396-403. |
| [13] | 刘宏;郭荣新;宗云;卞建胜;李莎.化学沉积Ni-P/Ni-W-P合金的热处理晶化及磨损行为[J].材料热处理学报,2011(2):139-145. |
| [14] | Wu B;Xu BS;Zhang B;Dong SY.The effects of parameters on the mechanical properties of Ni-based coatings prepared by automatic brush plating technology[J].Surface & Coatings Technology,200712(12):5758-5765. |
| [15] | 洪波;姜传海;王新建;吴建生.Ni-P非晶薄膜晶化相与相变动力学的XRD分析[J].金属学报,2006(7):699-702. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%