以商业有限元分析软件ABAQUS为平台,基于GTN金属断裂模型对TC4钛合金光滑圆形试样和两种不同缺口形状试样在单向拉伸试验中的渐进破坏过程进行数值研究,同时对比分析了几何非线性的影响在数值计算中的差异.结果表明,该模型预测TC4钛合金试样单向拉伸试验的载荷-位移曲线及宏观断裂形貌与真实试验结果基本一致.
参考文献
[1] | 杨庆生;杨卫 .断裂过程的有限元模拟[J].计算力学学,1997,14(04):407-412. |
[2] | 黄向平,王建华.裂纹跟踪的网格生成技术[J].上海交通大学学报,2001(04):493-495. |
[3] | 邓建刚,蒋和洋,黎在良,闫维明.三维裂纹扩展轨迹的边界元数值模拟[J].应用力学学报,2003(02):49-53. |
[4] | 卢炎麟,黄鲜萍,姜献峰,潘柏松,冯小青.三维热权函数法和多虚拟裂纹扩展技术[J].计算力学学报,2003(03):302-308. |
[5] | C.A.Duarte;O.N.Hamzeh;T.J.Liszka .A generalized finite element method for the simulation of three- dimensional dynamic crack propagation[J].Computer Methods in Applied Mechanics and Engineering,2001(15/17):2227-2262. |
[6] | GURSON A L .Continuum theory of ductile rupture by void nucleation and growth[J].Journal of Engineering Materials and Technology,1977,99(01):2-15. |
[7] | RICE J R;TRACEY D M .On the ductile enlargement of voids in triaxial stress fields[J].Journal of the Mechanics and Physics of Solids,1969,17(03):201-217. |
[8] | MCCLINTOCK F A .A criterion for ductile fracture by the growth of holes[J].Journal of the Mechanics,1968,35:363-371. |
[9] | TVERGAARD V .Influence of voids on shear instabilities under plane strain conditions[J].International Journal of Fracture,1981,17(04):389-407. |
[10] | TVERGAARD V .Material failure by void coalescence in localized shear band[J].International Journal of Solids and Structures,1982,18(08):659-672. |
[11] | TVERGAARD V .On localization in ductile materials containing spherical voids[J].International Journal of Fracture,1982,18(04):237-246. |
[12] | TVERGAARD V;NEEDLEMAN A .Analysis of the cupcone fracture in a round tensile bar[J].ACTA METALLURGICA,1984,32(01):157-169. |
[13] | 赵嘉琪,吴国清,程祥军,南海.α污染层对ZTC4钛合金铸态试样冲击性能的影响[J].材料工程,2013(06):59-62. |
[14] | 刘晓华,马英杰,李晋炜,张韧,雷家峰,刘羽寅.TC4钛合金电子束焊接接头低周疲劳性能研究[J].航空材料学报,2013(03):53-57. |
[15] | 颜鸣皋;刘伯操;李金桂.中国航空材料手册[M].北京:中国标准出版社,2002 |
[16] | 张克实;李世辉;郑长卿 .裂尖细观断裂研究一大应变情形下应力、变形和空穴演变的分析[J].西北工业大学学报,1988,6(04):435-444. |
[17] | Cuesta, I.I.;Alegre, J.M.;Lacalle, R. .Determination of the Gurson-Tvergaard damage model parameters for simulating small punch tests[J].Fatigue & Fracture of Engineering Materials and Structures,2010(11):703-713. |
[18] | 庄茁;由小川;廖剑晖.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社,2009 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%