欢迎登录材料期刊网

材料期刊网

高级检索

采用四点弯曲试验及有限元模型对比分析两种成型工艺下,工字型加筋结构试验件的破坏过程及破坏机理.研究表明:共固化试验件比二次胶接试验件损伤门槛高,且损伤扩展缓慢,表现出较好的承载能力;共固化试验件损伤主要发生在筋条蒙皮连接界面,且填充区也发生破坏;二次胶接试验件损伤主要发生在胶膜内部.在试验的基础上建立渐进损伤有限元模型,考虑两种成型工艺的不同及工字型筋条铺层角的不对称,有效地模拟两种工艺下的破坏.

参考文献

[1] VIJAYARAJU K;MANGALGIRI P D;DATTAGURU B .Experimental study of failure and failure progression in Tstiffened skins[J].Computers & Structures,2004,64(02):227-234.
[2] YAP J W H;SCOTT M L;THOMSON R S et al.The analysis of skin-to-stiffener debonding in composite aerospace structures[J].Computers & Structures,2002,57(01):425-435.
[3] YAPJ W H;THOMSON R S;SCOTT M L et al.Influence of post-buckling behaviour of composite stiffened panels on the damage criticality[J].Computers & Structures,2004,66(01):197-206.
[4] Ronald Krueger;Pierre J. Minguet .Analysis of composite skin-stiffener debond specimens using a shell/3D modeling technique[J].Composite structures,2007(1):41-59.
[5] A.C. Orifici;R.S. Thomson;I. Herszberg;T. Weller;R. Degenhardt;J. Bayandor .An analysis methodology for failure in postbuckling skin-stiffener interfaces[J].Composite structures,2008(1/3):186-193.
[6] A.C. Orifici;R.S. Thomson;R. Degenhardt;A. Kling;K. Rohwer;J. Bayandor .Degradation investigation in a postbuckling composite stiffened fuselage panel[J].Composite structures,2008(2):217-224.
[7] 孙晶晶,张晓晶,宫占峰,汪海.复合材料帽型筋条脱粘的失效机理分析[J].航空学报,2013(07):1616-1626.
[8] 张永久,耿小亮,甘建,岳珠峰.考虑损伤和界面脱粘的复合材料加筋板稳定性试验与模拟研究[J].应用力学学报,2013(01):19-24.
[9] HASHIN Z .Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47(02):329-334.
[10] YEH H Y;KIM C H .The Yeh-Stratton criterion for composite materials[J].Journal of Composite Materials,1994,28(10):926-939.
[11] 岳珠峰;王富生;王佩艳.Analysis and Optimization Design of Aircraft Composite Structures[M].北京:科学出版社,2011:31.
[12] A. Turon;C.G. Davila;P.P. Camanho .An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models[J].Engineering Fracture Mechanics,2007(10):1665-1682.
[13] BENZEGGAGH M L;KENANE M .Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus[J].Composites Science and Technology,1996,56(04):439-449.
[14] Lei Yang;Ying Yan;Yujia Liu;Zhiguo Ran .Microscopic failure mechanisms of fiber-reinforced polymer composites under transverse tension and compression[J].Composites science and technology,2012(15):1818-1825.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%