提出了一种利用三点弯曲试样获取延性材料本构关系的测试方法：针对小尺寸缺口试样的三点弯曲线载荷-位移曲线，采用有限元辅助测试（Finite-element-analysis aided tests，FAT）方法，迭代获得材料代表性体积单元（Representative volume element，RVE）本构关系。研究表明，两种延性材料的有限元迭代反求结果和单轴拉伸试验结果吻合较好。应用该方法，可以采用小尺寸缺口试样来获取延性材料的本构关系。
A test method is proposed to obtain uniaxial constitutive relationships of ductile materials by using the small-scale bending specimens with a semi-circle notch.Linear load-displacement experimental curves of the specimens under three-point bending tests are taken as the iterative referenced target so that RVE (Representative volume element)uniaxial constitutive relationships of the ductile materials are obtained by the FAT (Finite-element-analysis aided tests)method.It is shown that the uniaxial constitutive relationships for two kinds of ductile materials by finite-element-analysis are in good agreement with the standard tensile results.Therefore,the method for the small-scale specimens can be conveniently used to get the uniaxial constitutive relationships for ductile materials.
参考文献
| [1] | T. Tsuchiya;O. Tabata;J. Sakata;Y. Taga.Specimen size effect on tensile strength of surface-micromachined polycrystalline silicon thin films[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,19981(1):106-113. |
| [2] | Greek Staffan;Johansson Stefan;Furtsch Matthias;Rump Arnold;Ericson Fredric.Mechanical characterization of thick polysilicon films: Young's modulus and fracture strength evaluated with microstructures[J].Journal of Micromechanics and Microengineering,19993(3):245-251. |
| [3] | H.D. Espinosa;B.C. Prorok;B. Peng.Plasticity size effects in free-standing submicron polycrystalline FCC films subjected to pure tension[J].Journal of the Mechanics and Physics of Solids,20043(3):667-689. |
| [4] | 丁建宁;孟永钢;温诗铸.电磁驱动式微拉伸装置的研究[J].仪器仪表学报,2000(5):441-445,457. |
| [5] | WU Hao;MENG Yonggang;SU Caijun;WEN Shizhu.An apparatus for measuring mechanical properties of microstructures in tensile mode[J].中国科学G辑(英文版),2004(z1):127-132. |
| [6] | Osterberg P.M.;Senturia S.D..M-TEST: A test chip for MEMS material property measurement using electrostatically actuated test structures[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,19972(2):107-118. |
| [7] | 陈辉;蔡力勋;姚迪;包陈.基于小尺寸材料试验与有限元分析的耦合方法获取材料力学性能[J].机械强度,2014(2):187-192. |
| [8] | 于思淼;蔡力勋;赵国明.聚合物 PA66直至断裂的全程单轴本构关系研究[J].航空材料学报,2015(3):60-68. |
| [9] | Jean-Marc Collin;Gérard Mauvoisin;Philippe Pilvin;Rochdi El Abdi.Use of spherical indentation data changes to materials characterization based on a new multiple cyclic loading protocol[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20081/2(1/2):608-622. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%