欢迎登录材料期刊网

材料期刊网

高级检索

基于麦克斯韦方程组和材料本构方程,利用多物理场有限元软件COMSOL Multiphysics 3.5a中的RF模块建立了多坑绒面的有限元模型,并对硅片腐蚀前后的光学特性进行了模拟.研究表明,与硅片腐蚀前相比,腐蚀后(即多坑)绒面反射率较低,功率流y分量较高,具有较好的陷光效果,当波长为800 nm时,多坑绒面表面电场z分量的最大值和最小值分别为腐蚀前硅片的3.1倍和2.3倍,而表面磁场y分量两个极值分别为腐蚀前硅片的6倍和6.6倍;通过将模拟结果和实验数据比较可知,多坑模型模拟结果更接近实验值,所获模拟结果可更好地指导实际生产.

参考文献

[1] Chao Yan;Wu Liqun;Fan Wei;Li Ying .A Study of Texturing on the Surface of Advanced Multi-Crystalline Silicon Solar Cell[J].Advanced Science Letters,2013(11):3301-3303.
[2] Hayoung Park;Joon Sung Lee;Soonwoo Kwon .Investigation of Improving Texturing Effect by Surface Saw Damage Etching Using Acidic Etchant for Silicon Solar Cells[J].Journal of the Korean Institute of Metals and Materials,2008(12):835-840.
[3] Hyunho Kim;Sungeun Park;Soo Min Kim;Seongtak Kim;Young Do Kim;Sung Ju Tark;Donghwan Kim .Influence of surface texturing conditions on crystalline silicon solar cell performance[J].Current applied physics: the official journal of the Korean Physical Society,2013(Suppl.2):s34-s40.
[4] Jinsu Yoo;Jun-Sik Cho;SeJin Ahn et al.Random reactive ion etching texturing techniques for application of multicrystalline silicon solar cells[J].THIN SOLID FILMS,2013,546:275.
[5] Park S W;Kim J .Application of acid texturing to multicrystalline silicon wafers[J].Journal of the Korean Physical Society,2003,43(03):423.
[6] 钱勇,冯仕猛.多晶硅表面陷阱坑形貌对表面光反射率的影响[J].光学学报,2012(02):294-299.
[7] Hamid Farrokhi;Wei Zhou;Hongyu Zheng;Zhongli Li .Numerical Simulation of Non-Ablative Laser Texturing of Silicon Surface with a Continuous Wave Fiber Laser[J].Journal of computational and theoretical nanoscience,2014(1):53-57.
[8] 张发云.多晶硅表面陷阱坑形貌的光学性能模拟[J].光子学报,2012(09):1076-1080.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%