定向凝固技术可获得定向及单晶组织结构,大大改善材料的力学和物理性能.阐述了定向凝固理论及定向凝固技术的研究现状,定向凝固技术的发展过程就是温度梯度不断提高、冷却速率不断加快的过程.简述了几种新型定向凝固技术,并展望了定向凝固技术的未来发展趋势.
参考文献
[1] | 商昭,沈军,张建飞,傅恒志.定向凝固NiAl-Cr(Mo)共晶复合材料的研究进展[J].材料导报,2011(09):1-5. |
[2] | 刘林,张军,沈军,黄太文,傅恒志.高温合金定向凝固技术研究进展[J].中国材料进展,2010(07):1-9. |
[3] | 崔红保,王锦永,米国发,王狂飞.多元多相合金定向凝固的研究进展[J].热加工工艺,2009(23):48-52. |
[4] | 安桂焕,赵鸿金,杨斌,张明明,徐高磊,李金德.热型连铸单晶铜工艺设备关键材质的选择[J].有色金属科学与工程,2012(02):20-23. |
[5] | 周尧和;胡壮麒;介万奇.凝固技术[M[M].北京:机械工业出版社,1998 |
[6] | 周振平,李荣德.定向凝固技术的发展[J].中国铸造装备与技术,2003(02):1-3. |
[7] | 胡汉起.金属凝固原理[M].北京:机械工业出版社,1991 |
[8] | 傅恒志;郭景杰;刘林.先进材料定向凝固[M].北京:科学出版社,2008 |
[9] | Lin Liu;Taiwen Huang;Min Qu;Gang Liu;Jun Zhang;Hengzhi Fu .High thermal gradient directional solidification and its application in the processing of nickel-based superalloys[J].Journal of Materials Processing Technology,2010(1):159-165. |
[10] | 张卫国,刘林,赵新宝,屈敏,余竹焕,傅恒志.定向凝固高温合金的研究进展[J].铸造,2009(01):1-6. |
[11] | Tiller W A;Jackson K A;Rutter J W et al.The redistribution of solute atoms during the solidification of metals[J].Acta Metall,1953,1(04):428. |
[12] | Mullins W W;Sekerka R F .Application of linear programming theory to crystal faceting[J].Journal of Physics and Chemistry of Solids,1962,23(06):801. |
[13] | Fu Hengzhi;Xie Faqin .The solidification characteristics of near rapid and supercooling directional solidification[J].Sci Techn Adv Mater,2001,2(01):193. |
[14] | 李晓历,李金山,唐玲,胡锐,寇宏超,傅恒志.定向凝固下Cu-Cr合金初始凝固的平界面距离及界面失稳[J].稀有金属材料与工程,2008(04):613-616. |
[15] | 彭广威,刘健,李理,曾斌.定向凝固理论及技术的研究现状[J].铸造设备研究,2005(04):44-47. |
[16] | Francis I Versnyder;Shank M E .The development of columnar grain and single crystal high temperature materials through directional solidification[J].Material Science and Engineering,1970,6(04):213. |
[17] | Versnyder F L;Barlow R B;Sink L W et al.Directional solidification in the precision casting of gas turbine parts[J].Modern Cast,1967,52(06):68. |
[18] | Erickson J S;Owczarski W A;Curran P M .Advances in fabricating aerospace structures process speeds up directional solidification[J].METAL PROGRESS,1971,99(03):58. |
[19] | Giamei A F;Tschinkel J G .Liquid metal cooling:A new solidification technique[J].Metallurgical Transactions,1976,7A(09):1427. |
[20] | 张胜霞,刘刚,刘林,张军,傅恒志.固溶处理参数对一种单晶高温合金微观偏析的影响[J].铸造,2012(01):84-88. |
[21] | Nakagawa Y G;Murakami K;Ohtomo A et al.Directional growth of eutectic composite by fluidized bed quenching[J].Trans ISIJ,1980,20(09):614. |
[22] | 张丰收,沈军,贺跃辉,傅恒志,刘林.特种合金电磁软接触定向凝固冷却新工艺[J].材料科学与工艺,2007(04):445-448. |
[23] | 杨森,黄卫东,林鑫,周尧和.定向凝固技术的研究进展[J].兵器材料科学与工程,2000(02):44-50. |
[24] | 陈光;李建国;傅恒志 .先进定向凝固技术[J].材料导报,1999,13(05):5. |
[25] | 刘忠元;李建国;傅恒志 .两种定向凝固方法DZ2合金的力学性能和组织[J].材料研究学报,1996,10(01):13. |
[26] | 谢发勤;张军;毛协民 等.深过冷熔体激发快速定向凝固[J].材料科学与工艺,1996,4(03):102. |
[27] | Lux B;Haour G;Mollard F .Dynamic under cooling of super alloys[J].Metallurgiya,1981,35(12):1235. |
[28] | 李德林;杨根仓;周尧和 .深过冷合金再辉与凝固组织的研究[J].金属学报,1992,28(10):A421. |
[29] | Gill S C;Zimmermann M;Kurz W .Laser resolidification of the Al-Al2Cu eutectic..The coupled zone[J].ACTA METALLURGICA ET MATERIALIA,1992,40(11):2895. |
[30] | 大野笃美;唐彦斌;张正德.金属凝固学[M].北京:机械工业出版社,1983 |
[31] | 大野笃美;邢建东.金属的凝固理论、实践及应用[M].北京:机械工业出版社,1990 |
[32] | 王艳林,王自东,张鸿.连续定向凝固技术的研究进展[J].中国铸造装备与技术,2008(04):8-12. |
[33] | 左小伟,王恩刚,韩欢,张林,赫冀成.强磁场下Fe-49%Sn偏晶合金凝固组织及磁性能[J].金属学报,2008(10):1219-1223. |
[34] | 李贵茂,柳艳,邹兴政,于富琳,李春荣,王恩刚,韩柯.横向静磁场对Cu-10%Ag合金定向凝固组织的影响[J].功能材料,2013(15):2197-2201. |
[35] | 玄伟东,任忠鸣,李传军,任维丽,陈超,于湛.纵向磁场对不同尺寸定向凝固高温合金DZ417G组织的影响[J].金属学报,2012(05):629-635. |
[36] | 晋芳伟,任忠鸣,任维丽,邓康,钟云波,余建波.强磁场下过共晶铝硅合金凝固过程中初晶硅的迁移行为[J].中国有色金属学报,2007(02):313-319. |
[37] | Xi Li;Yves Fautrelle;Zhongming Ren .Morphological instability of cell and dendrite during directional solidification under a high magnetic field[J].Acta materialia,2008(13):3146-3161. |
[38] | 周涛,夏华,詹捷,彭成允,陈振华.快速凝固Mg-6wt.%Zn合金的制备及微观组织研究[J].重庆理工大学学报(自然科学版),2010(03):91-95. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%