欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 铝合金表面搅拌摩擦加工处理的研究进展(Ⅱ)——表面复合材料层的制备

材料导报, 2015, 29(1): 99-105. doi: 10.11896/j.issn.1005-023X.2015.01.017

铝合金表面搅拌摩擦加工处理的研究进展(Ⅱ)——表面复合材料层的制备

吴冰冰 1, , 刘成龙 2, , 童路 3, , 昌霞 4, , 黄伟九 5,

1.重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400054;重庆理工大学材料科学与工程学院,重庆400054

2.重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400054;重庆理工大学材料科学与工程学院,重庆400054

3.重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆,400054

4.重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆,400054

5.重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400054;重庆理工大学材料科学与工程学院,重庆400054

基金项目:   汽车零部件制造及检测技术教育部重点实验室开放课题(2011)   中国科学院兰州化学物理研究所固体润滑国家重点实验室开放基金(1105)   高性能复杂制造国家重点实验室开放课题基金(HPCM-2013-02)   重庆市重点自然科学基金(cstc2013jjB0106)  

关键词： 搅拌摩擦加工 , 铝合金 , 表面改性 , 复合材料 , 颗粒增强

Research Progress of Surface Modification of Aluminum Alloy by Friction Stir Processing Ⅱ——The Preparation of Surface Composite Layer

Keywords： friction stir processing , aluminum alloy , surface modification , composite , particle reinforcement

对搅拌摩擦加工制备铝合金表面复合材料层的增强颗粒类型、添加方式、加工工艺等方面的研究进行了综述,并系统分析了加工工艺参数对增强颗粒分布均匀性和复合材料层性能的影响.为解决铝合金表面复合材料层中增强颗粒的分布均匀性问题,未来应从铝合金塑性流动、增强颗粒润湿性及搅拌摩擦加工新工艺方面进行更加深入系统的研究.

参考文献

[1] 王祝堂;田荣璋.铝合金及其加工手册[M].长沙:中南工业大学出版社,1989
[2] 潘复生;张丁非.铝合金及应用[M].北京:化学工业出版社,2006
[3] Srivatsan T S .Microstructure,tensile properties and fracture behaviour of aluminium alloy 7150[J].Journal of Materials Science,1992,27(17):4772.
[4] 甘卫平,范洪涛,许可勤,周兆锋.Al-Zn-Mg-Cu系高强铝合金研究进展[J].铝加工,2003(03):6-12.
[5] 葛灵丹,王树奇,杨子润.7075铝合金的磨损行为及其机理探讨[J].特种铸造及有色合金,2011(02):178-182.
[6] Wilson S.;Alpas A.T. .Thermal effects on mild wear transitions in dry sliding of an aluminum alloy[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):440-449.
[7] 滕敏,李垚,赫晓东.铝合金材料表面改性研究进展[J].宇航材料工艺,2004(03):12-17.
[8] Ibrahim I A;Mohamed F A;Lavernia E J .Particulate reinforced metal matrix composites--A review[J].Journal of Materials Science,1991,26(5):1137.
[9] WANCHUCK WOO;HAHN CHOO;DONALD W. BROWN .Influence of the Tool Pin and Shoulder on Microstructure and Natural Aging Kinetics in a Friction-Stir-Processed 6061-T6 Aluminum Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2007(1):69-76.
[10] 王快社,林兆霞,周龙海,孔亮,王文.搅拌摩擦加工铸态铝铁合金的显微组织[J].中国有色金属学报（英文版）,2012(05):1270-1275.
[11] Giles T L;Ishi K O;Zhilyaev A P et al.The effect of friction stir processing on the microstructure and mechanical properties of an aluminum lithium alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2009,40:104.
[12] A. Azushima;R. Kopp;A. Korhonen;D. Y. Yang;F. Micari;G. D. Lahoti;P. Groche;J. Yanagimoto;N. Tsuji;A. Rosochowski;A. Yanagida .Severe plastic deformation (SPD) processes for metals[J].CIRP Annals,2008(2):716-735.
[13] Xu, C.;Horita, Z.;Langdon, T.G. .Microstructural evolution in an aluminum solid solution alloy processed by ECAP[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(18):6059-6065.
[14] Z.Y. MA .Friction Stir Processing Technology: A Review[J].Metallurgical and materials transactions. A, physical metallurgy and materials science,2008(3):642-658.
[15] Pradeep, S.;Pancholi, V..Effect of microstructural inhomogeneity on superplastic behaviour of multipass friction stir processed aluminium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:78-87.
[16] Dieguez T;Burguefo A;Svoboda H .Superplasticity of a friction stir processed 7075-T651 aluminum alloy[J].Procedia Mater Sci,2012,1:110.
[17] 钱锦文,李京龙,熊江涛,张赋升,林鑫.搅拌摩擦加工原位反应制备Al3Ti-Al表面复合层[J].焊接学报,2010(08):61-64.
[18] 魏艳妮,李京龙,熊江涛,张赋升,钱锦文,李雪飞.铝合金搅拌摩擦加工原位反应生成物颗粒增强机制[J].航空材料学报,2010(01):47-51.
[19] Liming Ke;Chunping Huang;Li Xing;Kehui Huang .Al–Ni intermetallic composites produced in situ by friction stir processing[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(2):494-499.
[20] Zhang Q;Xiao B L;Ma Z Y .In situ formation of various intermetallic particles in Al-Ti-X(Cu,Mg) systems during friction stir processing[J].INTERMETALLICS,2013,40:36.
[21] C.J. Hsu;C.Y. Chang;P.W. Kao .Al-Al_3Ti nanocomposites produced in situ by friction stir processing[J].Acta materialia,2006(19):5241-5249.
[22] Hsu CJ;Kao PW;Ho NJ .Ultrafine-grained Al-Al2Cu composite produced in situ by friction stir processing[J].Scripta materialia,2005(3):341-345.
[23] You G L;Ho N J;Kao P W .In-situ formation of Al2O3 nanoparticles during friction stir processing of Al-SiO2 composite[J].Materials Characterization,2013,80:1.
[24] You G L;Ho N J;Kao P W .The microstructure and mechanical properties of an Al-CuO in-situ composite produced using friction stir processing[J].Materials Letters,2013,90:26.
[25] You G L;Ho N J;Kao P W .Aluminum based in situ nanocomposite produced from Al-Mg-CuO powder mixture by using friction stir processing[J].Materials Letters,2013,100:219.
[26] Q. Zhang;B.L. Xiao;W.G. Wang .Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO_2 system by friction stir processing[J].Acta materialia,2012(20):7090-7103.
[27] Wei Wang;Qing-yu Shi;Peng Liu;Hong-ke Li;Ting Li .A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing[J].Journal of Materials Processing Technology,2009(4):2099-2103.
[28] M. SALEHI,M. SAADATMAND,J. AGHAZADEH MOHANDESI.搅拌摩擦技术制备AA6061/SiC纳米复合材料的工艺参数优化[J].中国有色金属学报,2012(05):1055-1063.
[29] Dolatkhah A;Golbabaei P et al.Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing[J].Materials and Design,2012,37:458.
[30] Shorowordi K M;Laoui T;Haseeb A S M A et al.Microstructure and interface characteristics of B4 C,SiC and Al2O3 reinforced Al matrix composites:A comparative study[J].J Mater Process Techn,2003,412(3):738.
[31] T. S. Mahmoud;E. Y. El-Kady;A. Al-Shihri .Mechanical and corrosion behaviours of Al/SiC and Al/Al_2O_3 metal matrix nanocomposites fabricated using powder metallurgy route[J].Corrosion Engineering, Science and Technology,2012(1):45-53.
[32] Shafiei-Zarghani A;Kashani-Bozorg S F;Zarei-Hanzaki A .Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing[J].WEAR,2011,270(5-6):403.
[33] Shafiei-Zarghani, A;Kashani-Bozorg, SF;Zarei-Hanzaki, A .Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):84-91.
[34] Mahmoud E R I;Takahashi M;Shibayanagi T et al.Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing[J].WEAR,2010,268(9-10):1111.
[35] Izadi H;Gerlich A P .Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/alurninum composites[J].CARBON,2012,50(12):4744.
[36] Liu Q;Ke L M;Liu F C et al.Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing[J].Materials and Design,2013,45:343.
[37] Liu Z Y;Xiao B L;Wang W G et al.Developing high-performance aluminum matrix composites with directionally aligned carbon nanotubes by combining friction stir processing and subsequent rolling[J].CARBON,2013,62:35.
[38] Morisada Y;Fujii H;Nagaoka T et al.Fullerene/A5083 composites fabricated by material flow during friction stir processing[J].COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2007,38:2097.
[39] Moghaddas, M.A.;Kashani-Bozorg, S.F..Effects of thermal conditions on microstructure in nanocomposite of Al/Si _3N _4 produced by friction stir processing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:187-193.
[40] I.S. Lee;CJ. Hsu;C.F. Chen;NJ. Ho;P.W. Kao .Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing[J].Composites science and technology,2011(5):693-698.
[41] Devaraju A;Kumar A;Kumaraswamy A et al.Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing[J].Materials and Design,2013,51:331.
[42] Rejil, C.M.;Dinaharan, I.;Vijay, S.J.;Murugan, N..Microstructure and sliding wear behavior of AA6360/(TiC+B _4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:336-344.
[43] Devaraju A;Adepu K;Adepu K et al.Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites[(SiC + Gr) and (SiC + Al2 O3)]fabricated by friction stir processing[J].J Mater Res Techn,2013,2:362.
[44] Devaraju A;Kumar A;Kotiveerachari B .Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid composites via friction stir processing[J].Materials and Design,2013,45:576.
[45] Asl A M;Khandani S T .Role of hybrid ratio in microstructural,mechanical and sliding wear properties of the Al5083/ graphit%/Al2 O3p a surface hybrid nanocomposite fabricated via friction stir processing method[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2013,559:549.
[46] Anvari S R;Karimzadeh F;Enayati M H .A novel route for development of Al-Cr-O surface nano-composite by friction stir processing[J].Journal of Alloys and Compounds,2013,562:48.
[47] Anvari S R;Karimzadeh F;Enayati M H .Wear characteristics of Al-Cr-O surface nano-composite layer fabricated on Al6061 plate by friction stir processing[J].WEAR,2013,304(1-2):144.
[48] Lee I S;Kao P W;Chang C P et al.Formation of Al-Mo intermetallic particle-strengthened aluminum alloys by friction stir processing[J].INTERMETALLICS,2013,35:9.
[49] Sharifitabar M;Sarani A;Khorshahian S et al.Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route[J].Materials and Design,2011,32(8-9):4164.
[50] 王国庆;赵衍华.铝合金的搅拌摩擦焊接[M].北京:宇航出版社,2010
[51] Mahmoud E R I;Ikeuchi K;Takahashi M .Fabrication of SiC particle reinforce composite on aluminium surface by friction stir processing[J].Sci Techn Weld Joining,2008,13(7):607.
[52] 林英英,刘成龙,吴冰冰,黄伟九.铝合金表面搅拌摩擦加工技术的研究进展（Ⅰ）[J].材料导报,2013(15):139-144,154.
[53] Azizieh M;Kokabi A H;Abachi P .Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing[J].Materials and Design,2011,32(4):2034.
[54] Asadi P;Faraji G;Besharati M K.Producing of AZ91/SiC composite by friction stir processing (FSP)[J].Int J Adv Manuf Techn,2010(51):247.
[55] Lim D K;Shibayanagi T;Gerlich A P .Synthesis of multiwalled CNT reinforced aluminium alloy composite via friction stir processing[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009,507:194.
[56] Bhushan R K;Kumar S .Influence of SiC particles distribution and their weight percentage on 7075 A1 alloy[J].Journal of Materials Engineering and Performance,2011,20(2):317.
[57] Deng, K.K.;Wang, X.J.;Wu, Y.W.;Hu, X.S.;Wu, K.;Gan, W.M..Effect of particle size on microstructure and mechanical properties of SiCp/AZ91 magnesium matrix composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:158-163.
[58] Ghader Faraji;Omid Dastani;S. Ali Asghar Akbari Mousavi .Effect of Process Parameters on Microstructure and Micro-hardness of AZ91/Al_2O_3 Surface Composite Produced by FSP[J].Journal of Materials Engineering and Performance,2011(9):1583-1590.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net