欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 等离子束在金属零件3D打印中的研究现状和发展趋势

材料导报, 2015, 29(1): 111-116. doi: 10.11896/j.issn.1005-023X.2015.01.019

等离子束在金属零件3D打印中的研究现状和发展趋势

王淑峰 1, , 姬强 2, , 迟静 3, , 赵健 4, , 高飞 5, , 李惠琪 6,

1.山东科技大学材料科学与工程学院,青岛,266590

2.青岛海纳等离子科技有限公司,青岛,266590

3.山东科技大学材料科学与工程学院,青岛,266590

4.山东科技大学材料科学与工程学院,青岛,266590

5.泰安市农业机械科学研究所,泰安,271000

6.山东科技大学材料科学与工程学院,青岛,266590

基金项目:   山东科技大学科研创新团队支持计划   青岛市科技发展计划项目(12-1-4-6-(4)-jch)   青岛经济技术开发区重点科技发展计划项目(2013-1-51)  

关键词： 3D打印 , 快速成形 , 等离子束

Research Status and Developing Tendency of Plasma Jet in Metal Components 3D Printing

Keywords： 3D printing , rapid prototyping , plasma jet

3D打印技术作为一项全球范围的革命性技术,获得了国内外的广泛关注.等离子束和激光束同为高能束流,等离子束成形性价比更高,在金属零件特别是铁基材料的工业化3D打印方面将有更好的发展前景.针对激光束和等离子束的特点,重点分析了近十余年来等离子束表面冶金技术和等离子束金属零件快速成形技术等方面的进展,并展望了今后等离子束3D打印技术的发展趋势.

参考文献

[1] Emanuel Sachs;Michael Cima;James Cornie et al.Threedimensional printing:The physics and implications of additive manufacturing[J].CIRP Annals-Manuf Techn,1993,42(1):257.
[2] Ai Jumei;Du Ping .Discussion on 3D print model and technology[J].Appl Mech Mater,2014,543-547:130.
[3] 郭振华,王清君,郭应焕.3D打印技术与社会制造[J].宝鸡文理学院学报（自然科学版）,2013(04):64-70.
[4] 杨永强,刘洋,宋长辉.金属零件3D打印技术现状及研究进展*[J].机电工程技术,2013(04):1-7.
[5] 蔡恩泽.3D打印颠覆传统制造业[J].中国中小企业,2012(11):46-47.
[6] 杨恩泉.3D打印技术对航空制造业发展的影响[J].航空科学技术,2013(01):13-17.
[7] 王华明.高性能金属构件增材制造技术开启国防制造新篇章[J].国防制造技术,2013(03):5-7.
[8] Graham Gagg;Elaheh Ghassemieh;Florencia Edith Wiria .Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant[J].MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS,2013,33:3858.
[9] 姜祎
[10] Flanders P .New materials and torch shapes increase range of plasma cutting applications[J].Welding Journal,2011,90(10):22.
[11] Jiang Shaoqun;Ren Qingwen;Ding Ying et al.Characteristics of Fe--based WC composite coatings prepared by double-pass plasma cladding process[J].Rare Metal Mater Eng,2012,41(S1):195.
[12] 刘邦武,李惠琪,孙玉宗.等离子束熔覆铁基合金涂层的组织与性能研究[J].材料科学与工艺,2006(01):85-87.
[13] Chen Hao;Li Huiqi;Sun Yuzhong .Effect of RE on the cracking resistance and microstructure of coatings formed by plasma jet surface metallurgy[J].Journal of Rare Earths,2005,23(S1):383.
[14] Chen Hao;Li Huiqi .Microstructure and wear resistance of Fe-based coatings formed by plasma jet surface metallurgy[J].Materials Letters,2006,60(11):1311.
[15] Chen H;Li HQ;Sun YZ;Li M .Microstructure and properties of coatings with rare earth formed by DC-plasma jet surface metallurgy[J].Surface & Coatings Technology,2006(16/17):4741-4745.
[16] 李敏,李惠东,李惠琪,裴中爱,孙玉宗.同步送粉等离子束表面冶金合金化涂层的凝固组织特性及形成机理[J].焊接学报,2006(03):69-72.
[17] Wang, S.;Li, H.;Chen, X.;Chi, J.;Li, M.;Chai, L.;Xu, H. .Improving microstructure and wear resistance of plasma clad Fe-based alloy coating by a mechanical vibration technique during cladding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(1):397-401.
[18] Lu Feng;Li Huiqi;Ji Qiang et al.Characteristics of the functionally graded coating fabricate by plasma transferred arc centrifugal cladding[J].Surface and Coatings Technology,2011,205(19):4441.
[19] Sun S;Brandt M;Harris J;Durandet Y .The influence of stellite 6 particle size on the inter-track porosity in multi-track cladding[J].Surface & Coatings Technology,2006(3/4):998-1005.
[20] Wang XB;Shun HL;Li CG;Wang XF;Sun D .The performances of TiB2-contained iron-based coatings at high temperature[J].Surface & Coatings Technology,2006(6):2500-2504.
[21] Q.Y. Hou;Y.Z. He;Q.A. Zhang .Influence of molybdenum on the microstructure and wear resistance of nickel-based alloy coating obtained by plasma transferred arc process[J].Materials & Design,2007(6):1982-1987.
[22] Hou QY;Gao JS;Zhou F .Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing[J].Surface & Coatings Technology,2005(2/3):238-243.
[23] Wang XB;Li CG;Peng XM;Shi LB;Zhang H .The powder's thermal behavior on the surface of the melting pool during PTA powder surfacing[J].Surface & Coatings Technology,2006(6):2648-2654.
[24] Xinhong Xiong;Haiou Zhang;Guilan Wang .Metal direct prototyping by using hybrid plasma deposition and milling[J].Journal of Materials Processing Technology,2009(1):124-130.
[25] 胡晓冬,赵万华.等离子弧焊直接金属成形技术的工艺研究[J].机械科学与技术,2005(05):540-542.
[26] 邹海平,张海鸥,王桂兰.基于等离子弧焊的金属零件直接制造系统设计[J].电焊机,2007(09):36-39.
[27] 许超,时红霞,赵万华,胡晓冬,崔琦.基于微束等离子弧三维焊接的直接金属成形系统设计[J].机床与液压,2003(04):54-56.
[28] 向永华,徐滨士,吕耀辉,姜祎,刘存龙,夏丹.基于微束等离子熔覆的直接金属快速成形系统设计[J].机床与液压,2010(05):56-58,3.
[29] 闫江松,张海鸥,王桂兰,艾辉.等离子熔积直接制造容积式送粉系统设计[J].华中科技大学学报（自然科学版）,2006(11):22-24.
[30] 王桂兰,吴圣川,张海鸥.复杂零件等离子熔积无模成形的温度场模拟[J].焊接学报,2007(05):49-52.
[31] Wurikaixi Aiyit;Mamtimin Geni;Adayi Xieeryazidan .Impacts of process parameters on the substrate distortion of PAW-based rapid prototyping[J].Key Engineering Materials,2011,462-463:1002.
[32] 乌日开西·艾依提,赵万华,买买提明·艾尼,孙文磊.基于等离子弧焊的Ti-6Al-4V快速成形工艺参数研究[J].稀有金属材料与工程,2012(01):134-138.
[33] Wurikaixi Aiyiti;Wanhua Zhao;Bingheng Lu;Yiping Tang .Investigation of the overlapping parameters of MPAW-based rapid prototyping[J].Rapid prototyping journal,2006(3):165-172.
[34] 乌日开西·史依提.等离子弧熔覆成形零件的力学性能研究[J].现代制造工程,2009(05):98-100.
[35] Wurikaixi AIYITI;Wanhua ZHAO;Yiping TANG;Bingheng LU .Study on the Process Parameters of MPAW-Based Rapid Prototyping[J].Key engineering materials,2007(3):1931-1934.
[36] Wurikaixi Aiyiti;Xiang Jie;Zhang Lianzhong et al.Study on the veritable parameters filling method of plasma arc welding based rapid prototyping[J].Key Engineering Materials,2012,522:-110.
[37] 方建成,徐文骥,赵紫玉,周锦进.精细饰纹件等离子熔射快速制造技术研究[J].大连理工大学学报,2004(06):805-809.
[38] Xu F J;Lv Y H;Liu B S et al.Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition[J].Materials and Design,2013,45:446.
[39] 向永华,徐滨士,吕耀辉,姜祎,刘存龙,夏丹.微束等离子粉末熔覆金属零件直接快速成形研究[J].中国表面工程,2009(04):44-48.
[40] 张海鸥,徐继彭,王桂兰.等离子熔积直接快速制造金属原型技术[J].中国机械工程,2003(12):1077-1079.
[41] 黄永军,张海鸥,王桂兰,熊新红.金属模具的等离子熔积直接成形及精整加工[J].航空制造技术,2004(08):93-95.
[42] Xinhong Xiong .A new method of direct metal prototyping: hybrid plasma deposition and milling[J].Rapid prototyping journal,2008(1):53-56.
[43] K. Balani;A. Agarwal;T. McKechnie .NEAR NET SHAPE FABRICATION VIA VACUUM PLASMA SPRAY FORMING[J].Transactions of the Indian Institute of Metals,2006(2):237-244.
[44] 乌日开西·艾依提.薄壁件等离子弧熔覆快速成形的温度控制研究[J].机床与液压,2012(13):19-21,28.
[45] 钱应平,张海鸥,王桂兰.等离子激光复合快速制造金属零件基础研究[J].航空制造技术,2006(08):93-96.
[46] 钱应平,张海鸥,王桂兰.等离子激光复合熔积高温合金粉末的工艺研究[J].中国机械工程,2006(03):315-317.
[47] Qian Yingping;Huang Juhua;Zhang Haiou et al.Direct rapid high-temperature alloy prototyping by hybrid plasmalaser technology[J].J Mater Process Techn,2008,208(1-3):99.
[48] 高山,宋文清,曲伸,李文学,帅焱林.微束等离子焊接在航空发动机中的应用[J].新技术新工艺,2013(02):19-21.
[49] 袁建鹏.3D打印用特种粉体材料产业发展现状与趋势[J].新材料产业,2013(12):19-23.
[50] 王淑峰,李惠琪,迟静,李敏,柴禄,许慧.等离子原位冶金复合碳化钨合金组织特性与结晶机理研究[J].材料工程,2011(08):72-76.
[51] Chi Jing;Li Huiqi;Wang Shufeng et al.Fabrication and microstructures of WC-based composites by plasma jet metallurgy[J].Adv Mater Res,2013,652-654:60.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net