欢迎登录材料期刊网

材料期刊网

高级检索

不锈钢和钛合金异种焊接在化工、航空和核工业等领域均有广泛的应用,但不锈钢和钛合金因理化性能的差异,焊接界面常形成大量脆性金属间化合物,无法得到优质的焊接结果。以扩散焊、激光焊和电子束焊为主总结了不同焊接方法的工艺参数和接头组织成分对不锈钢和钛合金焊接质量的影响,展望了不锈钢与钛合金异种金属焊接的发展趋势。

Dissimilar joining between stainless steels and titanium alloys is employed extensively in the chemi-cal,aerospace and nuclear industries,but the property of welding between them is limited by the distinction of their physical and chemical properties.The influences of parameters and compounds of different welding methods on wel-ding quality,mainly including diffusion welding,laser welding and electron beam welding are summarized.The deve-lopment trend of dissimilar joining between stainless steels and titanium alloys is forecasted.

参考文献

[1] Chen Yanbin;Chen Shuhai;Li Liquan .Influence of interfa-cial reaction layer morphologies on crack initiation and pro-pagation in Ti/Al joint by laser welding-brazing[J].Materials and Design,2010,31:227.
[2] Muralimohan C H;Muthupandi V;Sivaprasad K .The inf-luence of aluminum intermediate layer in dissimilar friction welds[J].INTERNATIONAL JOURNAL OF MATERIALS RESEARCH,2014,105:350.
[3] 徐锦锋,郭嘉宝,田健,翟秋亚.基于焊缝金属高熵化的钛/钢焊材设计与制备[J].铸造技术,2014(11):2674-2676.
[4] 李标峰.钛与钢及钛复合钢板的焊接性研究(Ⅳ)[J].材料开发与应用,2004(04):44-46.
[5] Kundu S;Sam S;Chatterjee S .Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints[J].Materials and Design,2011,32:2997.
[6] Kundu S;Roy D;Chatterjee S et al.Influence of interface microstructure on the mechanical properties of titanium/1 7-4PH stainless steel solid state diffusion bonded joints[J].Materials and Design,2012,37:560.
[7] 张秋峰 .TC4钛合金与1Cr18Ni9Ti不锈钢的扩散焊接工艺研究[D].南京航空航天大学,2008.
[8] Vigraman T;Ravindran D;Narayanasamy R .Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti-6Al-4V and AISI304L[J].Materials and Design,2012,36:714.
[9] Ferrante M.;Pigoretti EV. .Diffusion bonding of TI-6AL-4V to AISI 316L stainless steel: mechanical resistance and interface microstructure[J].Journal of Materials Science,2002(13):2825-2833.
[10] Kundu S;Mishra B;Olson D L et al.Interfacial reaction and strength properties of diffusion bonded joints of Ti64 al-loy and 1 7-4PH stainless steel using nickel alloy interlayer[J].Materials and Design,2013,51:714.
[11] Sam S;Kundu S;Chatterjee S .Diffusion bonding of tita-nium alloy to micro-duplex stainless steel using a nickel alloy interlayer:Interface microstructure and strength properties[J].Materials and Design,2012,40:237.
[12] Li Peng;Li Jinglong;Xiong Jiangtao et al.Study on diffu-sion bonded titanium alloy to stainless steel with Ni+Nb in-terlayers[J].J Aeronautical Mater,2011,31:46.
[13] Deng Yongqiang;Sheng Guangmin;Xu Chuan .Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer[J].Materials and Design,2013,46:84.
[14] Eroglu M;Khan T I;Orhan N .Diffusion bonding between Ti-6Al-4V alloy and microduplex stainless steel with copper interlayer[J].Materials Science and Technology,2002,18:68.
[15] Kundu S;Chatterjee S;Olson D et al.Interface micro-structure and strength properties of the diffusion-bonded joints of titanium|Cu interlayer|stainless steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2008,39:2106.
[16] 李亚江,吴娜,P.U.Puchkov.先进焊接技术在航空航天领域中的应用[J].航空制造技术,2010(09):43-47.
[17] Tomashchuk, I.;Sallamand, P.;Belyavina, N.;Pilloz, M..Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interlayer[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:114-122.
[18] 鲁磊 .TC4钛合金与304不锈钢的电子束焊接方法研究[D].南京理工大学,2012.
[19] Zhang Binggang;Wang Ting;Chen Guoqing et al.Contact reactive joining of TA1 5 and 304 stainless steel via a copper interlayer heated by electron beam with a beam deflection[J].Journal of Materials Engineering and Performance,2012,21:2067.
[20] WANG Ting,ZHANG Bing-gang,CHEN Guo-qing,FENG Ji-cai,TANG Qi.Electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel with copper interlayer sheet[J].中国有色金属学报(英文版),2010(10):1829-1834.
[21] 王廷,张秉刚,陈国庆,冯吉才.TA15钛合金与304不锈钢的电子束焊接[J].焊接学报,2010(05):53-56.
[22] Tomashchuk I;Sallamand P;Andrzejewski H et al.The formation of intermetallics in dissimilar Ti6Al4V/copper/AISI31 6L electron beam and Nb:YAG laser joints[J].In-termetallics,2011,19:1466.
[23] Wang Ting;Zhang Binggang;Fengjkai.Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium-stainless steel joint[J].Materials Characterization,2012:104-113.
[24] Wang Ting;Zhang Binggang;Feng Jicai .Influence of dif-ferent filler metals on electron beam welding of titanium al-loy to stainless steel[J].Transactions of Nonferrous Metals Society of China,2014,24:108.
[25] Wang Ting;Zhang Binggang;Feng Jicai .Microstructures and mechanical properties of electron beam-welded titanium-steel joints with vanadium,nickel,copper and silver filler metals[J].Journal of Materials Engineering and Performance,2014,23:1498.
[26] Wang, T.;Zhang, B.;Chen, G.;Feng, J..High strength electron beam welded titanium-stainless steel joint with V/Cu based composite filler metals[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,2013:41-47.
[27] 王廷,张秉刚,张艳桥,冯吉才,钟诗胜.采用不同结构Cu/V填充层的钛合金/不锈钢电子束焊接试验[J].焊接学报,2014(08):71-74.
[28] 王廷,张秉刚,张艳桥,冯吉才,钟诗胜.添加QCr0.8阻隔层的钛/钢电子束焊接接头组织与性能[J].稀有金属材料与工程,2014(05):1209-1213.
[29] Anawa EM;Olabi AG .Using Taguchi method to optimize welding pool of dissimilar laser-welded components[J].Optics & Laser Technology,2008(2):379-388.
[30] Shanmugarajan B;Padmanabham G .Fusion welding studies using laser on Ti-SS dissimilar combination[J].Optics La-sers Eng,2012,50:1621.
[31] Chen Shuhai;Zhang Mingxin;Huang Jihua et al.Micro-structures and mechanical property of laser butt welding of titanium alloy to stainless steel[J].Materials and Design,2014,53:504.
[32] Alton D Romig.ASM metals handbook,Vol10:Materials characterization[M].ASM Handbook Committee,1990
[33] Gen Satoh;Y. Lawrence Yao;Caian Qiu .Strength and microstructure of laser fusion-welded Ti-SS dissimilar material pair[J].The International Journal of Advanced Manufacturing Technology,2013(1/4):469-479.
[34] M. Gao;S. W. Mei;Z. M. Wang .Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer[J].Science and Technology of Welding and Joining,2012(4):269-276.
[35] Gnyusov S F;Klimenov V A;Alkhimov Yu V et al.For-mation of the structure of titanium and stainless steel in laser welding[J].Svarochnoe Proizvodstvo,2012,65(1):17.
[36] Taeshin Chung;Jungsoo Kim;Jeongseok Bang et al.Micro-structures of brazing zone between titanium alloy and stain-less steel using various filler metals[J].Transactions of Nonferrous Metals Society of China,2012,22:639.
[37] Yue X;He P;Feng J C et al.Microstructure and interfa-cial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal[J].Materials Characterization,2008,58:1721.
[38] Laik A;Shirzadi A A;Tewari R et al.Microstructure and interfacial reactions during active metal brazing of stainless steel to titanium[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2013,44:2212.
[39] Elrefaey A;Wojarski L;Tillmann W .Evaluation of corro-sion performance of titanium/steel joint brazed by Cu-brazed filler metal[J].Journal of Materials Engineering and Performance,2012,21(5):707.
[40] Li Peng;Li Jinglong;Salman Muhammad et al.Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V/SUS321 joints[J].Materials and Design,2014,56:649.
[41] Dey H C;Ashfaq M;Bhaduri A K et al.Joining of tita-nium to 304Lstainless steel by friction welding[J].J Mater Processing Techn,2009,209:5862.
[42] Muralimohan C H;Muthupandi V;Sivaprasad K .Proper-ties of friction welding titanium-stainless steel joints with a nickel interlayer[J].Procedia Mater Sci,2014,5:1120.
[43] Fazelnajafabadi M;Kashanibozorg S F;Zareihanzaki A .Joining of CP-Ti to 304 stainless steel using friction stir welding technique[J].Materials and Design,2010,31:4800.
[44] Fazelnajafabadi M;Kashanibozorg S F;Zarei-Hanzaki A .Dissimilar lap joining of 304 stainless steel to CP-Ti emplo-ying friction stir welding[J].Materials and Design,2011,32:1824.
[45] Kaio Niitsu Campo;Leonardo Contri Campanelli;Luciano Bergmann;Jorge Fernandez dos Santos;Claudemiro Bolfarini .Microstructure and interface characterization of dissimilar friction stir welded lap joints between Ti-6Al-4V and AISI 304[J].Materials & design,2014(Apr.):139-145.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%