欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料导报
  4. 铸造耐热铝合金在发动机上的应用研究与发展

材料导报, 2015, 29(3): 14-19. doi: 10.11896/j.issn.1005-023X.2015.03.003

铸造耐热铝合金在发动机上的应用研究与发展

隋育栋 1, , 王渠东 2,

1.上海交通大学轻合金精密成型国家工程研究中心及金属基复合材料国家重点实验室,上海,200240

2.上海交通大学轻合金精密成型国家工程研究中心及金属基复合材料国家重点实验室,上海,200240

关键词： 铸造铝合金 , Al-Si系合金 , Al-Cu系合金

Development of Heat-resistant Cast Aluminum Alloy for Engine Applications

Keywords： cast aluminum alloy , Al-Si alloy , Al-Cu alloy

主要综述了近年来铸造耐热铝合金在发动机上的研究现状和最新进展,列举了不同种类的铸造铝合金的高温性能,总结了提高铸造铝合金高温性能的几种方法,并展望了铸造耐热铝合金的发展趋势.

参考文献

[1] Shaji M C;Ravikumar K K;Ravi M et al.Development of a high strength cast aluminium alloy for possible automotive applications[J].Materials Science Forum,2013,765:54.
[2] Hirsch J;Al-Samman T .Superior light metals by texture engineering:Optimized aluminum and magnesium alloys for automotive applications[J].ACTA MATERIALIA,2013,61:818.
[3] Belov NA;Eskin DG;Avxentieva NN .Constituent phase diagrams of the Al-Cu-Fe-Mg-Ni-Si system and their application to the analysis of aluminium piston alloys[J].Acta materialia,2005(17):4709-4722.
[4] Jtirgen Hirsch .Aluminium in Innovative Light-Weight Car Design[J].Materials transactions,2011(5):818-824.
[5] Zolotorevsky V S;Belov N A.Casting aluminum alloys[M].Elsevier Science,2010
[6] Miller W S;Zhuang L;Bottema J et al.Recent development in aluminium alloys for the automotive industry[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2000,280(1):37.
[7] Ducker Worldwide L L C .Aluminum association auto and light truck group 2009 update on north American light vehicle aluminum content compared to the cther countries and regions of the world:Phase Ⅱ[R].America:Ducker Worldwide Limited Liability Company,2008.
[8] Srecko Manasijevic;Radomir Radisa;Srdjan Markovic .Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg[J].Intermetallics,2011(4):486-492.
[9] M. Abdulwahab;LA. Madugu;S.A. Yaro;S.B. Hassan;A.P.I. Popoola .Effects of multiple-step thermal ageing treatment on the hardness characteristics of A356.0-type Al-Si-Mg alloy[J].Materials & design,2011(3):1159-1166.
[10] Haghdadi, N.;Zarei-Hanzaki, A.;Abedi, H.R.;Sabokpa, O..The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:93-99.
[11] Wang E R;Hui X D;Chen G L .Eutectic Al-Si-Cu-Fe-Mn alloys with enhanced mechanical properties at room and elevated temperature[J].Materials and Design,2011,32(8-9):4333.
[12] Hiroyuki Toda;Takanori Nishimura;Kentaro Uesugi .Influence of high-temperature solution treatments on mechanical properties of an Al-Si-Cu aluminum alloy[J].Acta materialia,2010(6):2014-2025.
[13] Li, Y.;Yang, Y.;Wu, Y.;Wang, L.;Liu, X. .Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(26):7132-7137.
[14] Yang, Y.;Li, Y.;Wu, W.;Zhao, D.;Liu, X. .Effect of existing form of alloying elements on the microhardness of Al-Si-Cu-Ni-Mg piston alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(18):5723-5728.
[15] Yang Yang;Kuilong Yu;Yunguo Li;Degang Zhao;Xiangfa Liu .Evolution of nickel-rich phases in Al-Si-Cu-Ni-Mg piston alloys with different Cu additions[J].Materials & design,2012(Jan.):220-225.
[16] Z. Asghar;G. Requena;H.P. Degischer .Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography[J].Acta materialia,2009(14):4125-4132.
[17] Asghar, Z.;Requena, G.;Kubel, F. .The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(21/22):5691-5698.
[18] Z. Asghar;G. Requena;E. Boiler .Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys[J].Acta materialia,2011(16):6420-6432.
[19] Asghar Z;Requena G;Zahid G H et al.Effect of thermally stable Cu-and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy[J].Materials Characterization,2014,88:80.
[20] Chang-Yeol Jeong .High Temperature Mechanical Properties of Al-Si-Mg-(Cu) Alloys for Automotive Cylinder Heads[J].Materials transactions,2013(4):588-594.
[21] Chang-Yeol Jeong .Effect of Alloying Elements on High Temperature Mechanical Properties for Piston Alloy[J].Materials transactions,2012(1):234-239.
[22] 侯林冲,党惊知,高明灯,彭银江,沈建明.AlSi12Cu3Ni2Mg1活塞合金挤压铸造性能研究[C].2007年中国压铸、挤压铸造、半固态加工学术年会,2007:298-299.
[23] 杨伟,李建平,夏峰,杨通,杨忠.热暴露对新型铝基活塞合金组织和性能的影响[J].铸造,2012(03):312-315.
[24] Wojciech Kasprzak;Babak Shalchi Amirkhiz;Marek Niewczas.Structure and properties of cast Al-Si based alloy with Zr-V-Ti additions and its evaluation of high temperature performance[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2014:67-79.
[25] Li Yuguo;Wu Yuying;Qian Zhao et al.Effect of co-addition of RE,Fe and Mn on the microstructure and performance of A390 alloy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009,527(1-2):146.
[26] Krupi(n)ski M;Labisz K;Dobrza(n)ski L A et al.Derivative thermo analysis of the Al-Si cast alloy with addition of rare earths metals[J].Archives Foundry Eng,2010,10(1):79.
[27] Christopher Booth-Morrison;David N. Seidman;David C. Dunand .Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys[J].Acta materialia,2012(8):3643-3654.
[28] Hernandez-Sandoval J;Garza-Elizondo G H;Samuel A M et al.The ambient and high temperature deformation behavior of Al-Si-Cu-Mg alloy with monor Ti,Zr,Ni additions[J].Materials and Design,2014,58:89.
[29] Wenner S;Marioara C D;Ramasse Q M et al.Atomic-resolution electron energy loss studies of precipitates in an Al-Mg-Si Cu Ag alloy[J].Scri Mater,2014,74:92.
[30] Sung-Hwan Choi;Si-Young Sung;Hyun-Joo Choi .High Temperature Tensile Deformation Behavior of New Heat Resistant Aluminum Alloy[J].Materials transactions,2011(8):1661-1666.
[31] Bao Li;Hongwei Wang;Jinchuan Jie;Zunjie Wei .Effects of yttrium and heat treatment on the microstructure and tensile properties of Al-7.5Si-0.5Mg alloy[J].Materials & design,2011(3):1617-1622.
[32] Tiryakioglu, M;Campbell, J;Alexopoulos, ND .On the ductility potential of cast Al-Cu-Mg (206) alloys[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):23-26.
[33] 贾祥磊,朱秀荣,陈大辉,费良军.耐热铝合金研究进展[J].兵器材料科学与工程,2010(02):108-113.
[34] Mostafa M M;EI-Sayed M M;EI-Sayed H A et al.Steady state creep during transformation in Al-1wt.％Cu alloy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009,518:97.
[35] Rφyset J;Ryum N .Scandium in aluminium alloy[J].International Materials Reviews,2005,50(1):19.
[36] Bo H;Liu L B;Jin Z P .Thermodynamic analusis of Al-Sc,Cu-Sc and Al-Cu-Sc system[J].Journal of Alloys and Compounds,2010,490:318.
[37] Ellen Berghof-Hasselbacher;Gerald Schmidt;Mathias Galetz .Microstructures of Erbium Modified Aluminum-Copper Alloys[J].Practical Metallography,2012(7):396-411.
[38] Ligang Zhang;Patrick J. Masset;Fuyong Cao .Phase relationships in the Al-rich region of the Al-Cu-Er system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(9):3822-3831.
[39] Xu Chen;Zhiyi Liu;Song Bai;Yao Li;Lianghua Lin .Alloying behavior of erbium in an Al–Cu–Mg alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(1):201-205.
[40] Dongming Yao;Wengui Zhao;Hailong Zhao .High creep resistance behavior of the casting Al-Cu alloy modified by La[J].Scripta materialia,2009(12):1153-1155.
[41] Yao, D.;Xia, Y.;Qiu, F.;Jiang, Q. .Effects of La addition on the elevated temperature properties of the casting Al-Cu alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1463-1466.
[42] Zhao W G;Wang J G;Zhao H L et al.High creep resistance behavior of the cast Al-Cu alloy modified by nano-scale PrxOy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009,515(1-2):10.
[43] Bai Zhihao;Qiu Feng;Wu Xiaoxue et al.Age hardening and creep resistance of cast Al-Cu alloy modified by praseodymium[J].Materials Characterization,2013,86:185.
[44] 黄朝文,梁益龙,杨明,徐平伟,李祥,梁宇.211Z.X耐热高强韧铝合金的疲劳特性[J].金属热处理,2013(02):43-47.
[45] 张德恩,卢锦德,张晓燕.时效工艺对新型高强度铸造铝合金组织和力学性能的影响[J].现代机械,2009(03):85-86.
[46] Hutchinson C R;Fan X;Pennycook S J et al.On the origin of the high coarsening resistance of Ω plates in Al-Cu-Mg-Ag alloys[J].ACTA MATERIALIA,2001,49:2827.
[47] SONG Min,XIAO Daihong,ZHANG Fuqin.Effect of Ce on the thermal stability of the Ω phase in an Al-Cu-Mg-Ag alloy[J].稀有金属（英文版）,2009(02):156-159.
[48] 肖代红,陈康华,宋旼.铈对Al-Cu-Mg-Mn-Ag合金时效析出与显微组织的影响[J].中国有色金属学报,2007(05):669-675.
[49] M. S. Kaiser;S. Datta;A. Roychowdhury;M. K. Banerjee .Effect of Scandium Additions on the Tensile Properties of Cast Al-6Mg alloys[J].Journal of Materials Engineering and Performance,2008(6):902-907.
[50] S. Lathabai;P.G. Lloyd .The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy[J].Acta materialia,2002(17):4275-4292.
[51] Vo N Q;Dunand D C;Seidman D N .Improving aging and creep resistance in a dilute Al-Sc alloy by microalloying with Si,Zr and Er[J].ACTA MATERIALIA,2014,63:73.
[52] Yu. V. Mil’man;O. D. Neikov;A. I. Sirko;N. I. Danilenko;A. V. Samelyuk;N. P. Zakharova;A. I. Sharovskii;R. K. Ivashchenko;V. A. Goncharuk;N. G. Chaikina .STRUCTURE AND PROPERTIES OF Al–Mg ALLOYS DEPENDING ON SCANDIUM AND ZIRCONIUM ADDITIONS AND PRODUCTION METHODS[J].Powder Metallurgy and Metal Ceramics,2010(7/8):430-437.
[53] 牟俊东,魏作山,冯增建,高希柱,杨振宁,杨景飞.高性能活塞用氧化铝短纤维增强铝基复合材料[J].特种铸造及有色合金,2011(07):650-652.
[54] 杨忠,李建平,郭永春,杜卫东,夏峰,许吉信.SiCp增强高强耐热铝基复合材料的高温摩擦磨损行为[J].铸造,2006(10):1043-1046.
[55] Requena G;Degischer H P .Creep behaviour of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2006,420(1-2):265.
[56] Requena G;Degischer H P .Microtomographic study of the evolution of microstructure during creep of an Al-Si12CuMgNi alloy reinforced with Al2O3 short fibres[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,487:99.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net