激光熔-钎焊是实现镀锌钢板/铝合金异种金属理想连接方式的重要焊接方法.对于焊接多材料车身结构,镀锌钢-铝激光异种金属焊接工艺可提供重要的技术参考.在介绍激光熔-钎焊方法优异性的基础上,综述了影响焊接接头性能的主要因素,并总结了改善接头性能采取的优化措施.
参考文献
| [1] | 苏玉虎,秦国梁,位延堂.铝合金/钢异种金属熔-钎焊技术研究进展[J].焊接,2011(06):9-15. |
| [2] | 王涛,周惦武,张屹,陈根余.钢-铝激光焊接的关键技术与未来趋势展望[J].材料导报,2011(23):106-109. |
| [3] | 赵旭东,肖荣诗.铝/钢异种金属无钎剂激光填粉熔钎焊接[J].中国激光,2012(04):74-78. |
| [4] | 雷振,秦国梁,林尚扬,王旭友.基于激光-MIG复合热源的5A02铝合金/镀锌钢熔-钎焊[J].机械工程学报,2009(03):94-98. |
| [5] | Zhang M J;Chen G Y;Zhang Y et al.Research on microstructure and mechanical properties of laser keyhole[J].Materials and Design,2013,45:24. |
| [6] | 石常亮 .铝和镀锌钢CMT法钎焊工艺研究[D].哈尔滨:哈尔滨工业大学,2006. |
| [7] | El-Hebeary M R et al.Investigation on electron beam welding copper to AISI 316 stainless steel joints[J].J Xiamen University:Natural Science,2002,41(10):90. |
| [8] | Mathieu A;Shabadi R;Deschamps A;Suery M;Mattei S;Grevey D;Cicala E .Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)[J].Optics & Laser Technology,2007(3):652-661. |
| [9] | 周惦武,吴平,彭利,张屹,陈根余.镀Zn钢-6016铝合金异种金属的激光熔钎焊及数值模拟[J].中国有色金属学报,2012(06):1738-1746. |
| [10] | 张冬云,高双欣,高海芸,赵建哲.铝/钢异种金属激光填丝熔-钎焊连接工艺研究[J].激光与光电子学进展,2011(06):87-94. |
| [11] | Staufer H .Laser hybrid welding and laser brazing at AUDI and VW[J].Weld Word,2006,50:44. |
| [12] | 张诗正 .铝-钢激光熔钎焊复合接头组织与性能研究[D].兰州理工大学,2012. |
| [13] | Dharmendra, C.;Rao, K.P.;Wilden, J.;Reich, S. .Study on laser welding-brazing of zinc coated steel to aluminum alloy with a zinc based filler[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1497-1503. |
| [14] | Andrew J Pinkerton;Lin Li .Gap-free fibre laser welding of zinc-coated steel on Al alloy for light-weight aytomotive applications[J].Materials and Design,2011,32:495. |
| [15] | Thomy C;Vollertsen F .Laser-MIC hybris welding of aluminum to steel-Effect of process parameters on joint properties[J].Weld World,2012,56(5-6):124. |
| [16] | 邝玉林 .焊接参数对铝/钢激光填粉焊接质量的影响[D].长春理工大学,2013. |
| [17] | Peyre P;Sierra G;Deschaux-Beaume F;Stuart D;Fras G .Generation of aluminium-steel joints with laser-induced reactive wetting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):327-338. |
| [18] | 雷振,王旭友,王伟波,林尚扬.铝/镀锌钢复合热源熔-钎接头中的Al-Fe 金属间化合物层分析[J].焊接学报,2007(11):65-68. |
| [19] | Laukant H;Wallmann E;Muller M et al.Fluxless laser beam joinging of aluminum with zinc coated steel[J].SciTechn Welding Joinging,2005,10(2):219. |
| [20] | Michael Kreimeyer .Laser welding/brazing for joinging tasilored blanks[J].Ind Laser Solution,2002,17(11):15. |
| [21] | Gatzen M;Radel T;Thomy C et al.The role of zinc layer during wetting of aluminium on zinc-coatedsteel in laser brazing and welding[J].Phys Procedia,2014,56:730. |
| [22] | 刘夙伟,于治水,李瑞峰,周远远.Cu基钎料润湿铺展非等温温度场的数值模拟[J].华东船舶工业学院学报(自然科学版),2004(02):42-46. |
| [23] | 马凯,于治水,张培磊,卢云龙,褚振涛,史海川.激光作用下CuSi3在镀锌钢板表面的润湿行为研究[J].上海工程技术大学学报,2013(04):293-297. |
| [24] | Janssen M H E;Hermans M J M;Janssen M et al.Fatigue properties of laser-brazed joingts of dual phase and transfor mation induced plasticity steel with a copper-aluminium con sumable[J].Materials and Design,2010,31:3922. |
| [25] | Dong Honggang;Hu Wenjin;Duan Yuping et al.Dissimi lar metal joining of aluminum alloy to galvanized steel with Al-Si,Al-Cu,Al-Si-Cu and Zn-Al filler wires[J].J Mater Processing Techn,2012,212:458. |
| [26] | 林尚扬;雷振;游爱卿 .一种用于大光斑激光电弧复合热源连接异种金属的钎剂[P].中国,ZL200710143866.8,2009-01-08. |
| [27] | 彭利,周惦武,徐少华,彭平,刘金水.镀锌钢-6016铝合金激光焊接组织性能与第一性原理计算[J].中国有色金属学报,2012(01):230-238. |
| [28] | 蒋铠 .铝/钢预置粉末激光搭接熔钎焊组织与性能研究[D].兰州:兰州理工大学,2013. |
| [29] | 雷振,秦国梁,王旭友,林尚扬.铝/镀锌钢复合热源熔-钎接头的局部"未钎合"缺陷分析[J].焊接学报,2007(10):37-40,44. |
| [30] | Holger Laukant;Elisa Guimaraens;Uwe Glatzel .Laser beam aluminium-steel joint mechanical and dynamical propertities and detailed microstctural analysis of intermetallic FeAl-phases[J].Laser Mater Processing Conference,2007,1006:588. |
| [31] | 张明军;陈根余 .车用铝合金与镀锌钢光钎激光搭接焊实验研究[J].中国激光,2011,38(6):1. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%