电极是电阻点焊工作过程中最关键的部件,电极性能的优劣直接影响点焊的焊接质量和焊接效率.介绍了点焊电极的失效形式和失效机理,分别论述了点焊电极成分、强化工艺和结构设计以及点焊工艺和被焊件材料对电极性能的影响,提出了改善点焊电极寿命的未来研究发展趋势.
参考文献
| [1] | Yeung K S;Thornton P H .Transient thermal analysis of spot welding electrodes[J].Welding Journal,1999,78(1):75. |
| [2] | 涂芳,何柏林.点焊电极强化工艺的研究进展[J].机械工程材料,2005(01):23-26. |
| [3] | Matsumoto J;Mochizuki H .Spot welding of aluminum alloy electrode life for various electrodes[J].Weld Int,1994,8(6):438. |
| [4] | 董仁节,史耀武,赵玉梅,李毅.点焊电极点焊镀锌钢板的失效分析[J].湖北汽车工业学院学报,1999(03):55. |
| [5] | 徐梅,郦剑,董仕节.点焊电极失效的研究进展[J].热加工工艺,2003(04):46-48. |
| [6] | Holliday R J;Parker D;Williams N T .Relative contribution of electrode tip growth mechanisms in spot welding zinc coated steels[J].Weld World,1996,37(4):186. |
| [7] | 帅歌旺,方平,郭正华,郭吉萍.镀锌钢板电阻点焊电极的失效分析[J].热加工工艺,2009(13):122-124,128. |
| [8] | 吴志生,单平,胡绳荪,廉金瑞,程方杰,刘翠荣.铝合金点焊过程的铜铝合金化研究[J].中国机械工程,2003(16):1433-1436. |
| [9] | 刘平;赵冬梅;田保红.高性能铜合金及其加工技术[M].北京:冶金工业出版社,2005 |
| [10] | 张蓓,张治国,李卫.高强高导铜合金强化技术研究进展[J].材料导报,2012(21):92-95. |
| [11] | 刘瑞蕊,周海涛,周啸,陆德平,刘克明,彭谦之,彭勇,钟芳华.高强高导铜合金的研究现状及发展趋势[J].材料导报,2012(19):100-105. |
| [12] | 李美霞,杨涛,郭志猛.电阻焊电极用铜合金材料的研究进展[J].河北工业科技,2008(02):116-118. |
| [13] | 邹彬,胡建军,周文龙,马红军.固溶、形变和时效对Cu-0.65Cr-0.35Zr合金性能的影响[J].热加工工艺,2011(20):177-180. |
| [14] | Suzuki H .Strength of Cu-Cr-Zr alloy relating to the aging structure[J].Journal of the Japan Institute of Metals,1969,33(5):628. |
| [15] | Pillis M F;Araujo E G;Ramanathan L V .Effect of rare earth oxide additions on oxidation behavior of AISI 304L stainless steel[J].Mater Res,2006,9(4):375. |
| [16] | 陈一胜,魏梅红,段鹏征,刘萍.不同微合金元素对Cu-Cr-Zr组织与性能的影响[J].特种铸造及有色合金,2007(05):404-406. |
| [17] | 董仕节,史耀武,雷永平,Y.Zhou.（TiB2+Al2O3）增强铜基复合材料的研究[J].材料工程,2002(07):6-11. |
| [18] | 申玉田,崔春翔,申玉发,徐艳姬,刘华.Cu-Al合金内氧化的热力学分析--Ⅰ热力学函数[J].稀有金属材料与工程,2004(06):576-579. |
| [19] | Ocelík, V.;Eekma, M.;Hemmati, I.;De Hosson, J.T.M. .Elimination of Start/Stop defects in laser cladding[J].Surface & Coatings Technology,2012(8/9):2403-2409. |
| [20] | Klinkov SV;Kosarev VF;Sova AA;Smurov I .Deposition of multicomponent coatings by Cold Spray[J].Surface & Coatings Technology,2008(24):5858-5862. |
| [21] | Evans P J;Hyvarinen J;Samandi M .Surface modification of austenitic stainless steel by titanium ion implantation[J].Surface and Coatings Technology,1995,71(2):151. |
| [22] | 闫凯,姚正军,檀廷佐,俞宝文.钼基高温合金表面包埋渗法制备渗铝层的组织与性能[J].机械工程材料,2010(09):64-66,93. |
| [23] | Dehm G.;Shepeleva L.;Scheu C.;Bamberger M.;Mordike B.L.;Mordike S.;Ryk G.;Halperin G.;Etsion I.;Medres B. .Microstructure and tribological properties of Ni-based claddings on Cu substrates[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):18-26. |
| [24] | Wang S B;Zhu P R;Wang W J .The microstructure and tribological properties of copper surfaces implanted with car bon ions[J].Surface and Coatings Technology,2000,123(2-3):173. |
| [25] | Bateni M R;Ashrafizadeh F;Szpunar J A et al.Improving the tribological behavior of copper through novel Ti-Cu inter metallic coatings[J].WEAR,2002,253(5-6):626. |
| [26] | 张跃飞,陈飞,苏永安,潘俊德,徐重.纯铜加弧辉光离子渗钛的研究[J].金属热处理,2002(04):27-28. |
| [27] | Wu Zhisheng;Shan Ping;Lian Jinrui et al.Effect of deep cryogenic treatment on electrode life and microstructure for spot welding hot dip galvanized steel[J].Materials and Design,2003,24(8):687. |
| [28] | 陈鼎,黄培云,黎文献.金属材料深冷处理发展概况[J].热加工工艺,2001(04):57-59. |
| [29] | Lai X M;Luo A H et al.Optimal design of electrode coo ling system for resistance spot welding with the response surface method[J].Adv Manuf Techn,2009,41:226. |
| [30] | 吕冬,魏世同,刘仁东,郭金宇,林利.汽车用高强TWIP980钢板点焊工艺研究[J].鞍钢技术,2014(01):30-33. |
| [31] | 王敏,余震,程轩挺.新型工业材料的点焊工艺研究现状[J].电焊机,2001(12):9-11. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%