采用超声波搅拌和等温热处理制备ZL101合金半固态坯料,研究了超声波搅拌处理和等温热处理中等温温度、等温时间等工艺参数对ZL101半固态组织形貌的影响.研究结果表明:超声波搅拌可有效细化和球化组织,消除组织缺陷;适当的等温处理可以明显改善半固态ZL101的凝固组织;当等温温度为590℃、等温时间为30 min时,半固态ZL101合金中初生α-Al相细化和球化效果最明显;初生α-Al相的平均等积圆尺寸达到157μm,形状因子达到0.87.
参考文献
| [1] | Z. Fan .Semisolid metal processing[J].International Materials Reviews,2002(2):49-85. |
| [2] | 刘政,于锋波.半固态A356铝合金初生相形貌的分形特征[J].中国有色金属学报,2009(02):228-234. |
| [3] | Easton M A;Kaufmann H;Fragner W .The effect of chemical grain refinement and low superheat pouring on the structure of NRC castings of aluminium alloy Al-7Si-0.4Mg[J].Material Science and Engineering,2006,A420:135. |
| [4] | Nafisi S;Ghomashchi R .Boron-based refiners:Advantages in semi-solid-metal casting of Al-Si alloys[J].Material Science and Engineering,2007,A452-453:445. |
| [5] | Taghavi F;Saghafian H;Kharrazi Y H K .Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy[J].Materials and Design,2009,30:115. |
| [6] | 钟子龙,左孝青,董晓蓉,谢香云.高强铝合金半固态成形技术研究进展[J].材料导报,2013(19):122-124,134. |
| [7] | Wu S S;Zhong G;Wan L et al.Microstructure and propeties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process[J].Transactions of Nonferrous Metals Society of China,2010,20(3):763. |
| [8] | N. K. Kund;P. Dutta .Scaling Analysis of Solidification of Liquid Aluminum Alloy Flowing on Cooling Slope[J].Transactions of the Indian Institute of Metals,2012(6):587-594. |
| [9] | Eskin G I .Improvement of the structure and properties of ingots and worked aluminum alloy semifinished products by melt ultrasonic treatment in cavitation regime[J].METALLURGIST,2010,54(7-8):505. |
| [10] | Zhang L H;Yu J;Zhang X M .Effect of ultrasonic power and casting speed on solidification structure of 7050 aluminum alloy ingot in ultrasonic field[J].Journal of Central South University of Technology,2010,17:431. |
| [11] | Zhiwen Shao;Qichi Le;Zhiqiang Zhang .Effect of Ultrasonic Power on Grain Refinement and Purification Processing of AZ80 Alloy by Ultrasonic Treatment[J].Metals and Materials International,2012(2):209-215. |
| [12] | 张康,张奎,李兴刚.超声波处理对镁合金铸态组织的影响[J].材料导报,2009(03):63-66,76. |
| [13] | 黄文先,闫洪.Preparation and theoretic study of semi-solid Al2Y/AZ91 magnesium matrix composites slurry by ultrasonic vibration[J].稀土学报（英文版）,2014(06):573-579. |
| [14] | Yoshiki Tsunekawa,Masahiro Okumiya,Takahiro Motomura.超声熔体处理Al-7％Si合金坯料的半固态铸造[J].铸造,2012(04):425-430. |
| [15] | Wu Shusen,Liu Longfei,Ma Qianqian,Mao Youwu,An Ping.Degassing effect of ultrasonic vibration in molten melt and semi-solid slurry of Al-Si alloys[J].中国铸造,2012(03):201-206. |
| [16] | Seo P K;Kang C G .The effect of raw material fabrication process on microstructural characteristics in reheating process for semi-solid forming[J].Journal of Materials Processing Technology,2005,162-163:402. |
| [17] | 曹丽杰,马国睿,唐春冲.等温热处理工艺参数对Mg-8％Al-1％Si合金半固态显微组织的影响[J].中国有色金属学报（英文版）,2012(10):2364-2369. |
| [18] | Szilard J.Ultrasounic testing-non-conventional testing techniques[M].Lid:John Wiley & Son,1982 |
| [19] | 王家宣,姜丽红,方敏,熊洪淼,罗贻正.超声波作用下半固态A356合金的制备与理论研究[J].特种铸造及有色合金,2010(04):323-325. |
| [20] | 曹凤国.超声加工技术[M].北京:化学工业出版社,2004 |
| [21] | 朱泽明,吴树森,吕书林,戴维,万里,刘龙飞.间接超声振动制备A356铝合金半固态浆料的机理[J].中国有色金属学报,2011(02):325-331. |
| [22] | Czerwinski F .The processing phenomena of semisolid Mg-9% Al-1% Zn alloy at ultra high contents of the unmelted phase[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):51-61. |
| [23] | Jung H K;Kang C G .Induction heating process of an Al-Si aluminum alloy for semi-solid die casting and-its resulting microstructure[J].Journal of Materials Processing Technology,2002,120:355. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%