欢迎登录材料期刊网

材料期刊网

高级检索

以 Li2 CO3、MnO2、NiO、FeC2 O4·2 H 2 O 为原料,用高温固相法合成了尖晶石结构的 LiNi0.5 Mn1.5 O4/LiNi0.5 Mn1.45 Fe0.05 O4锂离子电池正极材料;并对合成的样品进行 XRD、SEM 及电化学性能测试。结果表明:引入Fe3+可以提高材料的结构稳定性,并且改善了材料的导电性,一定程度上减缓材料的容量衰减,LiNi0.5 Mn1.45 Fe0.05 O4表现出较好的电化学性能,0.2C 倍率下经20次充放电循环,未掺杂样品与掺杂样品的放电比容量分别为115.4 mAh/g 和120.1 mAh/g,容量保持率由92.1%提高到96.5%。

Li-ion battery cathode materials LiNi0.5 Mn1 .5 O4/LiNi0.5 Mn1 .45 Fe0.05 O4 were synthesized by high temperature solid-phase method,while Li2 CO3 ,MnO2 ,NiO and FeC2 O4 ·2 H 2 O was used as raw materials.The syn-thesized samples were tested by XRD,SEM and electrochemical measurement.Results showed:LiNi0.5 Mn1 .45 Fe0.05 O4 exhibited better electrochemical performance.When Fe doping is applied on LiNi0.5 Mn1 .5 O4 ,not only was the stability of electrode structure improved,but also its electric conductivity and cycle performance were excellent.After 20 charge-discharge cycles(at 0.2C rates),the discharge capacity of LiNi0.5 Mn1 .5 O4 was 1 1 5.4 mAh/g,while the LiNi0.5-Mn1 .45 Fe0.05 O4 was 120.1 mAh/g,with a capacity retain ratio from 92.1% to 96.5%.

参考文献

[1] Tarascon J;Guyomard D .Li metal-free rechargeable batte-ries based on Li1+x Mn2 O4 cathodes(0≤x ≤1)and carbon anodes[J].Journal of the Electrochemical Society,1991,138(10):2864.
[2] Deng B;Nakamura H;Yoshio M .Comparison and im-provement of the high rate performance of different types of LiMn2 O4 spinels[J].Journal of Power Sources,2005,141(1):1 1 6.
[3] Santhanam R;Rambabu B .Research progress in high vol-tage spinel LiNi0.5 Mn1.5 O4 material[J].Journal of Power Sources,2010,195(17):5442.
[4] Kim J H;Myung S T;Yoon C et al.Comparative study of LiNi0.5 Mn1.5 O4-δ and LiNi0.5 Mn1.5 O4 cathodes having two crystallographic structures:Fd3m and P4 3 32[J].CHEMISTRY OF MATERIALS,2004,16(5):906.
[5] Arunkumar T;Manthiram A .Influence of chromium doping on the electrochemical performance of the 5V spinel cathode LiMn1.5 Ni0.5 O4[J].Electrochimica Acta,2005,50(28):5568.
[6] Konishi H;Suzuki K;Taminato S et al.Effect of surface Li3 PO4 coating on LiNi0.5 Mn1.5 O4 epitaxial thin film elec-trodes synthesized by pulsed laser deposition[J].Journal of Power Sources,2014,269:293.
[7] Kiziltas-Yavuz N;Bhaskar A;Dixon D et al.Improving the rate capability of high voltage lithium-ion battery ca-thode material LiNi0.5 Mn1.5 O4 by ruthenium doping[J].Journal of Power Sources,2014,267:533.
[8] D. Li;A. Ito;K. Kobayakawa .Structural and electrochemical characteristics of LiNi_(0.5-x)Co_(2x)Mn_(1.5-x)O_4 prepared by spray drying process and post-annealing in O_2[J].Journal of Power Sources,2006(2):1241-1246.
[9] Idemoto Y;Narai H;Koura N .Crystal structure and ca-thode performance dependence on oxygen content of LiMn1.5-Ni0.5 O4 as a cathode material for secondary lithium batteries[J].Journal of Power Sources,2003,119-121:125.
[10] G.Q, Liu;L. Wen;X. Wang .Effect of the impurity Li_xNi_(1-x)O on the electrochemical properties of 5 V cathode material LiNi_(0.5)Mn_(1.5)O_4[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(38):9377-9381.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%