采用光纤激光-MIG 复合焊和光纤激光焊分别对6009铝合金进行焊接，研究两种焊接方式下焊接接头的成型性、显微组织、拉伸性能、显微硬度、断口形貌的不同。研究表明：激光电弧复合焊的焊接速度是激光焊接的3倍；相比于激光焊，激光电弧复合焊焊缝中心显微组织更加细小；接头的抗拉强度达到母材的63%以上，而激光焊接的抗拉强度仅仅只有母材的38%；显微硬度试验表明：复合焊存在软化区，而激光焊接几乎没有软化区；断口分析表明：复合焊和激光焊的拉伸断口都是典型的韧窝状态，但是复合焊接的韧窝更加均匀。
The effect of different bonding technology on welding point weld appearance,microstructure,tensile properties,microhardness,fracture morphology of 6 mm 6009 aluminum alloys which was welded by fiber laser and fi-ber laser-MIG arc hybrid welding were studied.The results showed that the speed of laser-MIG hybrid welding is 3 times of that of laser welding;laser-arc hybrid welding microstructure is better than laser welding microstructure;the tensile strength of the laser-MIG hybrid welding welded joints has reached 63% of the tensile strength of base mate-rial,while the tensile strength of laser welding is only 38% of that of the base material;the composite welding had softening zone,but laser welding almost have no softening one;the tensile fracture of laser-MIG hybrid welding and la-ser welding have typical dimples,but laser-MIG hybrid welding zone′s dimples are more even.
参考文献
| [1] | 关绍康,姚波,王迎新.汽车铝合金车身板材的研究现状及发展趋势[J].机械工程材料,2001(05):12-14,18. |
| [2] | 肖荣诗,左铁钏,Günter Ambrosy,Helmut Hügel.电流强化铝合金CO2激光焊接[J].中国激光,2004(03):359-362. |
| [3] | 宋东风,胡绳荪,马力.铝合金激光焊接技术的发展现状[J].电焊机,2004(09):1-3. |
| [4] | 张大文,张宏,刘佳,石岩.铝合金连续-脉冲激光焊接工艺对比实验研究[J].激光技术,2012(04):453-458. |
| [5] | J.M. Sanchez-Amaya;T. Delgado;L. Gonzalez-Rovira;F.J. Botana .Laser welding of aluminium alloys 5083 and 6082 under conduction regime[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2009(23):9305-9310. |
| [6] | 樊丁,董皕喆,余淑荣,张诗正.激光-电弧复合焊接的技术特点与研究进展[J].热加工工艺,2011(11):164-166,169. |
| [7] | 赵子强 .激光-TIG电弧复合焊接等离子体形态与焊缝特征的研究[D].北京工业大学,2011. |
| [8] | 陈俐 .航空钛合金激光全熔透稳定性及焊接物理冶金研究[D].武汉:华中科技大学,2005. |
| [9] | 陈俐,巩水利,姚伟.活性剂对钛合金激光焊焊缝成形影响[J].焊接,2008(11):32-37. |
| [10] | 高志国,黄坚,李亚玲,吴毅雄.激光-MIG复合焊中激光与电弧前后位置对焊缝成形的影响[J].焊接学报,2008(12):69-73. |
| [11] | 王家淳.激光焊接技术的发展与展望[J].激光技术,2001(01):48-53. |
| [12] | Zhao H;White D R;Debroy T .Current issues and problems in laser welding of automotive aluminum alloy[J].International Materials Reviews,1999,44(6):238. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%