累积叠轧焊合法制备颗粒增强金属基复合材料的研究现状与展望

材料导报, 2016, 30(3): 37-43. doi: 10.11896/j.issn.1005-023X.2016.03.007

累积叠轧焊合法制备颗粒增强金属基复合材料的研究现状与展望

侯健 ^1, , 王军丽 ^2, , 张清龙 ^3, , 史庆南 ^4,

1.昆明理工大学材料科学与工程学院,昆明650093;昆明理工大学分析测试研究中心,昆明650093

2.昆明理工大学分析测试研究中心,昆明,650093

3.昆明理工大学材料科学与工程学院,昆明650093;昆明理工大学分析测试研究中心,昆明650093

4.昆明理工大学材料科学与工程学院,昆明,650093

关键词：累积叠轧 , 颗粒增强 , 金属基复合材料

Status and Expectation of Research on Accumulative Roll Bonding Technique for Producing Metal Matrix Composite Materials Hybridized with Reinforcing Particles

Keywords： accumulative roll bonding , particle reinforcement , metal matrix composite materials

近年来,累积叠轧焊合法已经成为制备颗粒增强金属基复合材料的一种新颖工艺.介绍了累积叠轧焊合法制备复合材料的工艺原理,综述了累积叠轧过程中的颗粒增强金属基复合材料的金属基体与增强颗粒固相复合机制、强化机制以及复合材料性能.同时展望了用累积叠轧焊合法制备颗粒增强金属基复合材料的研究趋势.

参考文献

[1]	刘桂武;张相召;王倩;叶志国;史忠旗;乔冠军.采用TiH2预处理的SiC陶瓷柱阵列增强/高铬铸铁复合材料界面与耐磨性能[J].稀有金属材料与工程,2014(10):2339-2343.
[2]	Zhang, Long-Jiang;Qiu, Feng;Wang, Jin-Guo;Jiang, Qi-Chuan.High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:338-341.
[3]	Jiang, Jufu;Wang, Ying.Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano-sized SiC/7075 aluminum matrix composite prepared by ultrasonic-assisted semisolid stirring[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:350-358.
[4]	Ogawa, Fumio;Masuda, Chitoshi.Microstructure evolution during fabrication and microstructure-property relationships in vapour-grown carbon nanofibre-reinforced aluminium matrix composites fabricated via powder metallurgy[J].Composites, Part A. Applied science and manufacturing,2015:84-94.
[5]	Huang, Li-Mei;Luo, Lai-Ma;Zhao, Mei-Ling;Luo, Guang-Nan;Zhu, Xiao-Yong;Cheng, Ji-Gui;Zan, Xiang;Wu, Yu-Cheng.Effects of TiN nanoparticles on the microstructure and properties of W-30Cu composites prepared via electroless plating and powder metallurgy[J].Materials & design,2015Sep.(Sep.):39-43.
[6]	Roohollah Jamaati.High-strength and highly-uniform composite produced by anodizing and accumulative roll bonding processes[J].Materials & design,201010(10):P.4816.
[7]	Farajzadeh Dehkordi, H.;Toroghinejad, M.R.;Raeissi, K..Fabrication of Al/Al_2O_3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:460-467.
[8]	Morteza Alizadeh.Processing of A1/B_4C composites by cross-roll accumulative roll bonding[J].Materials Letters,201023(23):2641-2643.
[9]	Roohollah Jamaati;Sajjad Amirkhanlou;Mohammad Reza Toroghinejad.CAR process: A technique for significant enhancement of as-cast MMC properties[J].Materials Characterization,201112(12):1228-1234.
[10]	Hosseini, M.;Yazdani, A.;Danesh Manesh, H..Al 5083/SiC_p composites produced by continual annealing and roll-bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:415-421.
[11]	Soltani, M.A.;Jamaati, R.;Toroghinejad, M.R..The influence of TiO _2 nano-particles on bond strength of cold roll bonded aluminum strips[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:367-374.
[12]	Jafarian, Hamidreza;Habibi-Livar, Jafar;Razavi, Seyed Hossein.Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding[J].Composites, Part B. Engineering,2015Aug.(Aug.):84-92.
[13]	Azin Ahmadi;Mohammad Reza Toroghinejad;Abbas Najafizadeh.Evaluation of microstructure and mechanical properties of Al/Al_2O_3/SiC hybrid composite fabricated by accumulative roll bonding process[J].Materials & design,2014Jan.(Jan.):13-19.
[14]	Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H..Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,19992(2):579-583.
[15]	Jamaati, R.;Toroghinejad, M.R..Application of ARB process for manufacturing high-strength, finely dispersed and highly uniform Cu/Al_2O_3 composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201027/28(27/28):7430-7435.
[16]	Vahid Yousefi Mehr;Mohammad Reza Toroghinejad;Ahmad Rezaeian.The effects of oxide film and annealing treatment on the bond strength of Al-Cu strips in cold roll bonding process[J].Materials & design,2014Jan.(Jan.):174-181.
[17]	Mohammad Reza Kamali Ardakani;Shohreh Khorsand;Sajjad Amirkhanlou;Mohammad Javad Nayyeri.Application of compocasting and cross accumulative roll bonding processes for manufacturing high-strength, highly uniform and ultra-fine structured Al/SiC_p nanocomposite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:121-127.
[18]	Mohammad Reza Kamali Ardakani;Sajjad Amirkhanlou;Shohreh Khorsand.Cross accumulative roll bonding-A novel mechanical technique for significant improvement of stir-cast Al/Al_2O_3 nanocomposite properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:144-149.
[19]	Alizadeh, M.;Paydar, M.H..High-strength nanostructured Al/B _4C composite processed by cross-roll accumulative roll bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:14-19.
[20]	Ghaderi, O.;Toroghinejad, M.R.;Najafizadeh, A..Investigation of microstructure and mechanical properties of Cu-SiCP composite produced by continual annealing and roll-bonding process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:243-249.
[21]	李红;韩静涛.金属板材轧制-扩散复合机理研究进展[J].材料工程,2006(z1):507-514.
[22]	M. Eizadjou;H. Danesh Manesh;K. Janghorban.Investigation of roll bonding between aluminum alloy strips[J].Materials & design,20084(4):909-913.
[23]	M. Rezayat;A. Akbarzadeh.Bonding behavior of Al-Al_2O_3 laminations during roll bonding process[J].Materials & design,2012Apr.(Apr.):874-879.
[24]	Mohammad Masoumi;Esmaeil Emadoddin.Interface characterization and formability of two and three-layer composite sheets manufactured by roll bonding[J].Materials & design,2013Feb.(Feb.):392-396.
[25]	Miyajima, Yoji;Okubo, Satoshi;Abe, Hirold;Okumura, Hiroki;Fujii, Toshiyuki;Onaka, Susumu;Kato, Masaharu.Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing[J].Materials Characterization,2015:101-106.
[26]	Naseri, Majid;Hassani, Amir;Tajally, Mohammad.Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation[J].CERAMICS INTERNATIONAL,20153 Pt.A(3 Pt.A):3952-3960.
[27]	Roohollah Jamaati;Mohammad Reza Toroghinejad;Hossein Edris;Mohammad Reza Salmani.Comparison of microparticles and nanoparticles effects on the microstructure and mechanical properties of steel-based composite and nanocomposite fabricated via accumulative roll bonding process[J].Materials & design,2014Apr.(Apr.):359-367.
[28]	Jamaati, Roohollah;Toroghinejad, Mohammad Reza;Amirkhanlou, Sajjad;Edris, Hossein.Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:298-306.
[29]	M. Reihanian;F. Keshavarz Hadadian;M.H. Paydar.Fabrication of Al-2 vol% Al_2O_3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2014:188-196.
[30]	Amirkhanlou, Sajjad;Ketabchi, Mostafa;Parvin, Nader;Askarian, Masoomeh;Carreno, Fernando.Achieving ultrafine grained and homogeneous AA1050/ZnO nanocomposite with well-developed high angle grain boundaries through accumulative press bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2015:374-380.
[31]	Karbasi, Maryam;Alamdari, Eskandar Keshavarz.Investigation of lead base composite anodes produced by accumulative roll bonding[J].Materials & design,2015Feb.(Feb.):118-129.
[32]	Morteza Alizadeh;Hossein Akbari beni;Mohammad Ghaffari;Rasool Amini.Properties of high specific strength Al-4 wt.% Al_2O_3/B_4C nano-composite produced by accumulative roll bonding process[J].Materials & design,2013Sep.(Sep.):427-432.
[33]	E. Darmiani;I. Danaee;M.A. Golozar;M.R. Toroghinejad;A. Ashrafi;A. Ahmadi.Reciprocating wear resistance of Al-SiC nano-composite fabricated by accumulative roll bonding process[J].Materials & design,2013Sep.(Sep.):497-502.
[34]	C.Y. Liu;Q. Wang;Y.Z. Jia;B. Zhang;R. Jing;M.Z. Ma;Q. Jing;R.P. Liu.Evaluation of mechanical properties of 1060-A1 reinforced with WC particles via warm accumulative roll bonding process[J].Materials & design,2013Jan.(Jan.):367-372.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

累积叠轧焊合法制备颗粒增强金属基复合材料的研究现状与展望

Status and Expectation of Research on Accumulative Roll Bonding Technique for Producing Metal Matrix Composite Materials Hybridized with Reinforcing Particles

参考文献