Al/Cu复合材料具有质轻、导电良好和成本低等优点,成为了近年来研究的热点.介绍了Al/Cu复合材料的主要界面复合理论,并着重阐述了近年来对主流理论的研究.综述了国内外关于Al/Cu复合材料的制备工艺和数值模拟的研究进展,指出了各工艺的优缺点,并对制备工艺的改进方向、未来数值模拟的研究方向进行了展望.
参考文献
| [1] | Furkan Sarsilmaz.Weldability Characteristics of Dissimilar Al/Cu Friction Stir Weld Joints[J].Materialpruefung: Werkstoffe und Bauteile, Forschung Prufung Anwendung,20122(2):85-91. |
| [2] | P. Xue;B. L. Xiao;D. Wang.Achieving high property friction stir welded aluminium/copper lap joint at low heat input[J].Science and Technology of Welding and Joining,20118(8):657-661. |
| [3] | 吴铭方;司乃潮;陈健.铝合金/Cu/不锈钢接触反应钎焊及中间层溶解行为[J].中国有色金属学报（英文版）,2011(5):1035-1039. |
| [4] | Cheng Xiaole;Gao Yimin;Fu Hanguang;Xing Jiandong;Bai Bingzhe.Microstructural Characterization and Properties of Al/Cu/Steel Diffusion Bonded Joints[J].Metals and Materials International,20104(4):649-655. |
| [5] | Xia CZ;Li YJ;Puchkov UA;Gerasimov SA;Wang J.Microstructure and phase constitution near the interface of Cu/Al vacuum brazing using Al-Si filler metal[J].Vacuum: Technology Applications & Ion Physics: The International Journal & Abstracting Service for Vacuum Science & Technology,20088(8):799-804. |
| [6] | C. Z. Xia;Y. J. Li;J. Wang.Microstructure and phase constitution near Interface of Cu/Al vacuum brazing[J].Materials Science and Technology: MST: A publication of the Institute of Metals,20077(7):815-818. |
| [7] | 谢世坤;陈京平;万建新;郑慧玲.双金属铜包铝线的制备工艺与力学性能[J].材料导报,2008(5):83-84,88. |
| [8] | 谢世坤;易荣喜;夏翔.铜包铝复合金属线材的性能测试与分析[J].井冈山学院学报(自然科学版),2007(05):38-42. |
| [9] | 张建宇;姚金金;曾祥勇;韩艳秋;吴春京.铜包铝复合材料研究进展[J].中国有色金属学报,2014(5):1275-1284. |
| [10] | Chih-Yuan Chen;Weng-Sing Hwang.Effect of Annealing on the Interfacial Structure of Aluminum-Copper Joints[J].Materials transactions,20077(7):1938-1947. |
| [11] | 成小乐;高义民;邢建东;廖熠;尹敏.扩散连接Al/Cu/0Cr18Ni9Ti复合材料界面生长机理研究[J].稀有金属材料与工程,2007(z3):627-630. |
| [12] | Growth behavior of Cu/Al intermetallic compounds and cracks in copper ball bonds during isothermal aging[J].Microelectronics and reliability,20083(3):416. |
| [13] | Chih-Yuan Chen;Hao-Long Chen;Weng-Sing Hwang.Influence of Interfacial Structure Development on the Fracture Mechanism and Bond Strength of Aluminum/Copper Bimetal Plate[J].Materials transactions,20064(4):1232-1239. |
| [14] | Hug, E.;Bellido, N..Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,201122(22):7103-7106. |
| [15] | Vahid Yousefi Mehr;Mohammad Reza Toroghinejad;Ahmad Rezaeian.The effects of oxide film and annealing treatment on the bond strength of Al-Cu strips in cold roll bonding process[J].Materials & design,2014Jan.(Jan.):174-181. |
| [16] | 刘耀辉;刘海峰;于思荣.液固结合双金属复合材料界面研究[J].机械工程学报,2000(7):81-85. |
| [17] | 张卫文;李元元;龙雁;吴苑标;邵明.半连续铸造法制备AlCu/Al梯度材料[J].中国有色金属学报,2002(z1):188-191. |
| [18] | 董占贵;钱乙余;石素琴;吴培莲.Al/Cu/Al接触反应液相行为及其连接[J].焊接学报,2001(6):45-47. |
| [19] | 祖国胤;李小兵;丁明明;于九明.异步轧制铜/铝双金属复合板变形行为的研究[J].东北大学学报（自然科学版）,2011(5):675-678. |
| [20] | 李小兵;祖国胤;王平.退火温度对异步轧制铜/铝复合板界面组织及力学性能的影响[J].中国有色金属学报,2013(5):1202-1207. |
| [21] | Behcet Gulenc.Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method[J].Materials & Design,20081(1):275-278. |
| [22] | 张壮志;申昱;孔啸;曹常印.铜包铝排拉拔成形性能[J].塑性工程学报,2013(5):122-125. |
| [23] | Ya-jun Su;Xin-hua Liu;Yong-fu Wu;Hai-you Huang;Jian-xin Xie.Numerical simulation of temperature field in horizontal core-filling continuous casting for copper cladding aluminum rods[J].矿物冶金与材料学报,2013(07):684-692. |
| [24] | 王秋娜;刘新华;刘雪峰;谢建新.冷拉拔铜包铝细丝的退火工艺与组织性能研究[J].材料工程,2008(7):30-35. |
| [25] | 吴云忠;马永庆;刘世永;张洋.包复焊接铜包铝线加工工艺与固相结合机理研究[J].焊接,2006(4):40-42. |
| [26] | E.Takeuchi.Novel continuous casting process for clad steel slabs with level dc magnetic field[J].Ironmaking & Steelmaking: Products and applications,19973(3):257-262. |
| [27] | Hideaki YAMAMURA;Takehiko TOH;Hiroshi HARADA.Optimum Magnetic Flux Density in Quality Control of Casts with Level DC Magnetic Field in Continuous Casting Mold[J].ISIJ International,200110(10):1229-1235. |
| [28] | 罗奕兵;刘新华;谢建新.铜包铝复合棒材平辊轧制宽展变形行为[J].中国有色金属学报,2009(11):1976-1981. |
| [29] | 徐岩;骆俊廷;贾建波.低压压铸--冷挤压法制备铜包铝线的研究[J].中国机械工程,2009(22):2755-2758. |
| [30] | 李廷举;赵勇慧;温斌;金俊泽.直浇道电磁搅拌对连铸坯凝固组织影响[J].大连理工大学学报,2002(5):550-554. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%