等通道转角挤压(Equal channel angular pressing,ECAP)是大塑性变形制备超细晶材料的方法之一,具有大晶粒尺寸的材料可以在室温下挤压达到超细晶尺度。从 ECAP模具参数、工艺条件影响因素、模具及制备方法改进、细化机理、制备的超细晶材料组织稳定性及性能方面进行总结,并结合部分研究结果可知,ECAP模具正在不断被优化和改进,复合挤压技术不断出现,目前已实现超细晶材料的连续 ECAP挤压制备技术。等通道转角挤压的晶粒细化主要是由于剪切力的作用和第二相粒子的作用, ECAP晶粒细化机理及组合工艺的研究是目前研究的热点。超细晶材料在不同领域的应用对其性能提出的更高要求,对其大塑性变形制备技术本身也是挑战。
Equal channel angular pressing is one of the methods to prepare ultrafine grained materials by sever plastic deforma-tion.The materials with large grain size can be extruded at room temperature.This thesis summarized the mold parameters of ECAP,influence factors of process conditions,the improvement of mold and preparation method,refinement mechanism,micro-structure stability and properties of manufacturing ultrafine grained materials.Combined with the part of the research results,it shows that the ECAP mold is constantly being improved and optimized and composite extrusion technologies has appeared.Nowa-days,it makes continuous ultrafine grained ECAP technology come true.Grain refinement of ECAP is mainly due to shear stress and the effect of the second phase particles.ECAP grain refinement mechanism and combined technology have become a hot research to-pic.Higher application requirements of ultrafine grained materials are raised in different areas.It is also a challenge severe plastic de-formation manufacture technology itself.
参考文献
| [1] | 边丽萍;梁伟;马建;张文利;薛晋波;王红霞;赵兴国.改进型ECAP路径对Al-Mg2Si原位复合材料组织与力学性能的影响[J].中国有色金属学报,2011(8):1841-1846. |
| [2] | Kiyotaka Nakashima;Zenji Horita;Minoru Nemoto.Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing[J].Acta materialia,19985(5):1589-1599. |
| [3] | K. Oh-Ishi;A. Horita.Communications optimizing the rotation conditions fro grain refinement in equal-channel angular pressing[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,19987(7):2011-2013. |
| [4] | Yoshinori Iwahashi;Jingtao Wang;Zenji Horita;Minoru Nemoto;Terence G. Langdon.Principle of equal-channel angular pressing for the processing of ultra-fine grained materials[J].Scripta materialia,19962(2):143-146. |
| [5] | 程先华;江学明;吴炬;赵鹏宇.摩擦阻力对纯铝在等径弯角挤压过程中变形的影响[J].上海交通大学学报,2005(1):10-13. |
| [6] | 蔡刚毅;邓鹏辉;马壮;吕广庶.摩擦条件对高强铝合金单次ECAP作用的有限元模拟[J].特种铸造及有色合金,2009(6):518-521. |
| [7] | 方晓强;李淼泉;林莺莺.Ti-6Al-4V钛合金等通道转角挤压的有限元模拟[J].材料工程,2007(5):57-60,65. |
| [8] | 贾鹏博;杨西荣;刘晓燕;罗雷.摩擦系数对不同截面纯锆单道次ECAP变形影响的有限元模拟与实验验证[J].材料导报,2016(2):145-149. |
| [9] | Z.Horita;T.Fujinami.Equal-Channel Angular Pressing of Commercial Aluminum Alloys: Grain Refinement, Thermal Stability and Tensile Properties[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20003(3):691-701. |
| [10] | 姜义;史庆南;王璐;赵启淞.挤压速度对双通道等径角挤压7003铝合金组织的影响[J].金属热处理,2013(12):58-61. |
| [11] | Shin DH.;Pak JJ.;Kim YK.;Park KT.;Kim YS..Effect of pressing temperature on microstructure and tensile behavior of low carbon steels processed by equal channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20021/2(1/2):31-37. |
| [12] | Akihiro Yamashita;Daisuke Yamaguchi;Zenji Horita;Terence G. Langdon.Influence of pressing temperature on microstructural development in equal-channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20001(1):100-106. |
| [13] | 于彦东;初德胜.不同温度ECAP对ZK60合金力学性能的影响[J].热加工工艺,2012(19):27-28,32. |
| [14] | 何运斌;潘清林;刘晓艳;李文斌.ECAP法制备细晶ZK60镁合金的微观组织与力学性能[J].材料工程,2011(6):32-38. |
| [15] | INYOUNG KIM;JONGRYOUL KIM;DONG HYUK SHIN.Effects of Grain Size and Pressing Speed on the Deformation Mode of Commercially Pure Ti during Equal Channel Angular Pressing[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,20037(7):1555-1558. |
| [16] | A. Azushima;K. Aoki.Mechanical properties of ultrafine grained steel produced by repetitive cold side extrusion[J].CIRP Annals,20021(1):227-230. |
| [17] | J.-C. Lee;H.-K. Seok;J.-Y. Suh.Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing[J].Acta materialia,200216(16):4005-4019. |
| [18] | A. B. Naizabekov;V. A. Andreyachshenko;Radim Kocich.Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP[J].Micron: The international research and review journal for microscopy,2013:210-217. |
| [19] | 刘秀娟;刘白;姜俊侠;李庆亮.连续往复式等通道转角挤压装置的研究[J].锻压技术,2014(5):96-99. |
| [20] | Kang, HG;Lee, JP;Huh, MY;Engler, O.Stability against coarsening in ultra-fine grained aluminum alloy AA 3103 sheet fabricated by continuous confined strip shearing[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20081/2(1/2):470-480. |
| [21] | Jae-Chul Lee;Hyun-Kwang Seok;Jun-Hyun Han.Controlling the textures of the metal strips via the continuous confined strip shearing (C2S2) process[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,20015/6(5/6):997-1004. |
| [22] | Xu SB;Zhao GQ;Ren W;Guan YJ.Numerical investigation of aluminum deformation behavior in three-dimensional continuous confined strip shearing process[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):281-289. |
| [23] | P.W.J. Mckenzie;R. Lapovok.ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016--Part 2: Mechanical properties and texture[J].Acta materialia,20109(9):3212-3222. |
| [24] | 程晓农;宋刚;莫纪平;徐红星;许晓静.强化固溶态2024铝合金ECAP加工后的拉伸性能[J].江苏大学学报（自然科学版）,2007(1):33-36. |
| [25] | G.J. Raab;R.Z. Valiev;T.C. Lowe.Continuous processing of ultrafine grained Al by ECAP-Conform[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20041/2(1/2):30-34. |
| [26] | Cheng Xu;Steven Schroeder;Patrick B. Berbon.Principles of ECAP-Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy[J].Acta materialia,20104(4):1379-1386. |
| [27] | 樊曙天;许晓静.400℃退火对ECAP形变Q235钢的强度和位错强化的影响[J].江苏大学学报（自然科学版）,2012(3):342-344,358. |
| [28] | 查敏;李彦军;Ragnvald MATHIESEN;Ruben BJ(O)RGE;Hans J.ROVEN.等通道挤压变形结合中间退火制备Al-7Mg合金的组织、硬度演变及热稳定性[J].中国有色金属学报（英文版）,2014(7):2301-2306. |
| [29] | 张郑;杜忠泽;王经涛;赵西成.7475铝合金ECAP变形及组织热稳定性[J].有色金属,2004(2):31-34,121. |
| [30] | Jae Yeol Park;Dong Nyung Lee.Deformation and annealing textures of equal-channel angular pressed 1050 Al alloy strips[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20081/2(1/2):395-407. |
| [31] | S. Li;A. A. Gazder;I. J. Beyerlein.Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel[J].Acta materialia,20064(4):1087-1100. |
| [32] | A. R. Kilmametov;I. V. Alexandrov;A. A. Dubravina.Texture Analysis of Nanostructured Metals Produced by Severe Plastic Deformation[J].Materials Science Forum,20040(0):243-246. |
| [33] | Meng-Shan Tsai;Pei-Ling Sun;Po-We Kao.Influence of Severe Plastic Deformation on Precipitation Hardening in an Al-Mg-Si Alloy: Microstructure and Mechanical-Properties[J].Materials transactions,20094(4):771-775. |
| [34] | 王素梅;孙康宁;刘睿;毕见强.第二相粒子对ECAP挤压的2A12铝合金晶粒细化的影响[J].材料科学与工艺,2007(1):115-117. |
| [35] | 李鑫;江静华;赵永好;马爱斌;文道静;朱运田.ECAP和时效处理对ZK60镁合金腐蚀行为的影响[J].中国有色金属学报（英文版）,2015(12):3909-3920. |
| [36] | 何运斌;潘清林;刘晓艳;李文斌.镁合金等通道转角挤压过程中的晶粒细化机制[J].中国有色金属学报,2011(8):1785-1793. |
| [37] | 严凯;孙扬善;白晶;薛烽.ECAP对粗晶AZ31镁合金的晶粒细化机制的影响[J].热加工工艺,2011(10):70-73. |
| [38] | Cetlin, P.R.;Aguilar, M.T.P.;Figueiredo, R.B.;Langdon, T.G..Avoiding cracks and inhomogeneities in billets processed by ECAP[J].Journal of Materials Science,201017(17):4561-4570. |
| [39] | 吴世丁;安祥海;韩卫忠;屈伸;张哲峰.等通道转角挤压过程中fcc金属的微观结构演化与力学性能[J].金属学报,2010(3):257-276. |
| [40] | 汪建敏;周孔亢;陆晋;许晓静;姜银方.层错能在剧烈剪切变形时对晶粒细化的影响[J].机械工程学报,2008(11):126-131. |
| [41] | Han WZ;Zhang ZF;Wu SD;Li SX.Nature of shear flow lines in equal-channel angular-pressed metals and alloys[J].Philosophical Magazine Letters,200710(10):735-741. |
| [42] | D.R. Fang;Z.F. Zhang;S.D. Wu;C.X. Huang;H. Zhang;N.Q. Zhao;J.J. Li.Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al-Cu alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,20061/2(1/2):305-313. |
| [43] | 袁士种;郭鸿镇;赵张龙;王涛;姚泽坤.等通道转角挤压（ECAP）工艺对Ti-1023合金显微硬度的影响[J].航空材料学报,2009(2):25-28. |
| [44] | Han, Yuanfei;Li, Jiuxiao;Huang, Guangfa;Lv, Yuting;Shao, Xi;Lu, Weijie;Zhang, Di.Effect of ECAP numbers on microstructure and properties of titanium matrix composite[J].Materials & design,2015Jun.(Jun.):113-119. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%