基于裂纹闭合效应,利用ABAQUS软件建立用于预测残余应力场中疲劳裂纹扩展特性的弹塑性有限元模型.考虑塑性和残余应力场对裂纹闭合的作用,分析残余应力、应力比和裂尖单元尺寸对裂纹闭合效应的影响.研究结果表明:未喷丸试样的裂纹闭合类型为塑性诱导裂纹闭合,喷丸残余应力场中的裂纹闭合为塑性和残余压应力共同作用,且裂纹张开力的大小与残余应力的分布相对应;正应力比越大,裂纹闭合效应越不明显,疲劳裂纹扩展速率越快;裂尖单元尺寸小于塑性区范围时可以真实反映裂尖的闭合状态;喷丸残余压应力通过提高裂纹闭合力,增强裂纹闭合效应,抑制疲劳裂纹扩展.
参考文献
| [1] | P. S. Song;C. C. Wen.Crack closure and crack growth behaviour in shot peened fatigued specimen[J].Engineering Fracture Mechanics,19993(3):295-304. |
| [2] | Hu Liu;De-Guang Shang;Jian-Zhong Liu;Zhen-Kun Guo.Fatigue life prediction of laser welded 6156 Al-alloy joints based on crack closure[J].Theoretical and Applied Fracture Mechanics,2014:181-187. |
| [3] | Antunes, F. V.;Chegini, A. G.;Branco, R.;Camas, D..A numerical study of plasticity induced crack closure under plane strain conditions[J].International Journal of Fatigue,2015:75-86. |
| [4] | Y. Bao.Dependence of ductile crack formation in tensile tests on stress triaxiality, stress and strain ratios[J].Engineering Fracture Mechanics,20054(4):505-522. |
| [5] | 杨光 .不同应力比下2024-T4铝合金疲劳裂纹扩展速率试验研究及数值模拟[D].浙江工业大学,2012. |
| [6] | Y. Lei.Finite element crack closure analysis of a compact tension specimen[J].International Journal of Fatigue,20081(1):21-31. |
| [7] | 王明涛;曾元松;黄遐.大尺寸弹丸喷丸成形2024-T351铝合金表面质量研究[J].航空制造技术,2012(5):92-94. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%