为研究空气压缩机叶片表面腐蚀层的弧斑低温等离子体去除,利用高温高压反应釜模拟压缩机叶片腐蚀环境条件,在FV(520)B不锈钢表面制备了H2S腐蚀产物膜;利用玻恩-哈伯循环计算了硫化产物的晶格能,基于弧斑等离子体去除过程中能量计算探讨了腐蚀层去除机理;利用示波器、SEM、EDS等对放电过程的电压信号变化、处理后表面形貌、表面元素分布进行分析,研究了弧斑低温等离子体去除腐蚀层的过程、机制及电流对去除过程的影响.结果表明:表面硫化物层可在弧斑能量作用下脱离键合而去除;其去除过程分层进行,各层去除时的电压信号出现明显差异;弧斑低温等离子去除过程中,当电流为10、20和30 A时,去除时间为127、64和42 s,试样表面粗糙度分别为1.18、1.69和1.76 μm,表明电流增大能使去除效率提高,并使处理后试样表面粗糙度增加.
参考文献
| [1] | G.H. Farrahi;M. Tirehdast;E. Masoumi Khalil Abad.Failure analysis of a gas turbine compressor[J].Engineering failure analysis,20111(1):474-484. |
| [2] | 宋斌;陈铭;陈利修.喷砂预处理工艺对涂层结合强度的影响[J].机械设计与研究,2013(3):70-72,84. |
| [3] | 刘诗巍 .再制造坯料清洁技术研究[D].上海交通大学,2010. |
| [4] | 董以彬;徐长胜;孙明海.高压水除鳞技术在热轧中的应用及有关计算[J].重型机械,2001(2):46-47,51. |
| [5] | Takeda K.;Takeuchi S..Effects of pressure on the cleaning action of cathode spot in low vacuum[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,20021/2(1/2):163-168. |
| [6] | Iwao T.;Inagaki Y.;Sato A.;Yumoto M..Oxide-Layer Thickness Effect for Surface Roughness Using Low-Pressure Arc[J].IEEE Transactions on Plasma Science,20064(4):1223-1228. |
| [7] | Kubo, Y;Maezono, S;Ogura, K;Iwao, T;Tobe, S;Inaba, T.Pre-treatment on metal surface for plasma spray with cathode spots of low pressure arc[J].Surface & Coatings Technology,20051/4(1/4):1168-1172. |
| [8] | Koichi Takeda;Sunao Takeuchi.Removal of Oxide Layer on Metal Surface by Vacuum Arc[J].Materials transactions,19977(7):636-642. |
| [9] | Koichi Takeda;Masaya Sugimoto.Surface modification by cathode spots of a vacuum arc[J].IEEE Transactions on Plasma Science,20015(5):718-721. |
| [10] | Shi, Z.;Li, W.;Yan, N.;Zhang, Y..Removing Oxide Layers From Carbon-Steel Tubular Surfaces Using Vacuum Arcs Driven by Transverse Magnetic Field[J].IEEE Transactions on Plasma Science,20138 Pt.2(8 Pt.2):2068-2073. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%