欢迎登录材料期刊网

材料期刊网

高级检索

为了研究不同结构铬掺杂碳基薄膜在高温下与铝合金的磨损机理,采用非平衡磁控溅射在YT15刀具表面沉积Cr/CrC/DLC单周期和Cr/(CrC-DLC)n多周期多层膜,在24、200和400℃下与A319和A390铝合金进行摩擦试验.采用扫描电子显微镜、原子力显微镜、纳米压痕仪、拉曼光谱仪、销盘磨损仪对薄膜的形貌结构、力学和摩擦学性能进行测试.研究表明:多周期多层膜结构打断薄膜柱状生长,提高膜基结合力.两种薄膜表面粗糙度和硬度分别为4.3 nm和5.4 nm、9.8 GPa和9.0 GPa.磨球表面转移层由硅、石墨以及剥落的薄膜碎片组成,连续的转移层降低摩擦因数;但随着温度升高,转移层的连续性被破坏,导致摩擦因数升高.在高温摩擦过程中,多周期多层膜磨损逐渐释放出DLC子膜层,通过DLC子膜层的石墨化转变来保持低摩擦因数,提高薄膜寿命.薄膜磨损由室温的磨料磨损转变为高温的粘着磨损和犁沟磨损,其中由于A390含有初晶硅使磨损以犁沟磨损为主.

参考文献

[1] S. Bhowmick;A. T. Alpas.The performance of hydrogenated and non-hydrogenated diamond-like carbon tool coatings during the dry drilling of 319 Al[J].International Journal of Machine Tools & Manufacture: Design, research and application,20087/8(7/8):802-814.
[2] Fox-Rabinovich, G.;Dasch, J.M.;Wagg, T.;Yamamoto, K.;Veldhuis, S.;Dosbaeva, G.K.;Tauhiduzzaman, M..Cutting performance of different coatings during minimum quantity lubrication drilling of aluminum silicon B319 cast alloy[J].Surface & Coatings Technology,201116(16):4107-4116.
[3] Tatsuya Sugihara;Toshiyuki Enomoto.Improving anti-adhesion in aluminum alloy cutting by micro stripe texture[J].Precision Engineering,20122(2):229-237.
[4] Hovsepian PE;Luo Q;Robinson G;Pittman M;Howarth M;Doerwald D;Tietema R;Sim WM;Deeming A;Zeus T.TiAlN/VN superlattice structured PVD coatings: A new alternative in machining of aluminium alloys for aerospace and automotive components[J].Surface & Coatings Technology,20061/2(1/2):265-272.
[5] S. Bhowmick;M. J. Lukitsch;A. T. Alpas.Tapping of Al-Si alloys with diamond-like carbon coated tools and minimum quantity lubrication[J].Journal of Materials Processing Technology,201015(15):2142-2153.
[6] Said Jahanmir;Hooshang Heshmat;Crystal Heshmat.Evaluation of DLC Coatings for High-Temperature Foil Bearing Applications[J].Journal of Tribology,20091(1):011301-1-011301-11-0.
[7] 常家东;贾贵西;李振.磁控溅射CrC复合镀层对轴承性能可靠性的影响[J].功能材料,2012(04):484-486,491.
[8] Abdul Wasy;G. Balakrishnan;S. H. Lee;J. K. Kim;D. G. Kim;T. G. Kim;J. I. Song.Argon plasma treatment on metal substrates and effects on diamond-like carbon (DLC) coating properties[J].Crystal Research and Technology: Journal of Experimental and Industrial Crystallography,20141(1):55-62.
[9] B.J. Jones;L. Anguilano;J.J. Ojeda.Argon plasma treatment techniques on steel and effects on diamond-like carbon structure and delamination[J].Diamond and Related Materials,20117(7):1030-1035.
[10] 孙丽丽;代伟;张栋;汪爱英.Cr掺杂及Cr过渡层对类金刚石薄膜附着力的影响[J].中国表面工程,2010(4):26-28,34.
[11] Bouzakis, K.-D.;Makrimallakis, S.;Katirtzoglou, G.;Skordaris, G.;Gerardis, S.;Bouzakis, E.;Leyendecker, T.;Bolz, S.;Koelker, W..Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance[J].Surface & Coatings Technology,20105(5):1564-1570.
[12] Henderer, W.;Xu, F..Hybrid TiSiN, CrC/C PVD coatings applied to cutting tools[J].Surface & Coatings Technology,2013:381-385.
[13] P. Eklund;M. Sridharan;M. Sillassen;J. Bottiger.α-Cr_2O_3 template-texture effect on α-Al_2O_3 thin-film growth[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,200821(21):7447-7450.
[14] 曾群锋;刘官;董光能;彭润玲.类金刚石碳膜高温摩擦学性能的研究进展[J].真空科学与技术学报,2014(10):1024-1029.
[15] 卓国海;柯培玲;李晓伟;汪爱英;赵运才.不同过渡层对DLC薄膜力学性能和摩擦学性能的影响[J].中国表面工程,2015(6):39-47.
[16] Bobzin, K.;Bagcivan, N.;Thei?, S.;Wei?, R.;Depner, U.;Tro?mann, T.;Ellermeier, J.;Oechsner, M..Behavior of DLC coated low-alloy steel under tribological and corrosive load: Effect of top layer and interlayer variation[J].Surface & Coatings Technology,2013:110-118.
[17] Matthews A;Franklin S;Holmberg K.Tribological coatings: contact mechanisms and selection[J].Journal of Physics, D. Applied Physics: A Europhysics Journal,200718(18):5463-5475.
[18] 张文勇;孙德恩;裴晨蕊;张世宏;黄佳木.调制周期对CrAlN/ZrN纳米多层膜韧性的影响[J].表面技术,2016(1):55-61.
[19] 裴晨蕊;孙德恩;Sam Zhang;黄佳木.硬质陶瓷涂层增韧及其评估研究进展[J].中国表面工程,2016(2):1-9.
[20] Hiroki Hashiguchi;Munehisa Takei;Daisuke Kosemura;Atsushi Ogura.Stress evaluation in thin strained-Si film by polarized Raman spectroscopy using localized surface plasmon resonance[J].Applied physics letters,201217(17):172101-1-172101-3.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%