为研究连续玻纤／PE增强复合带的弹性性能，建立了连续玻纤／PE增强复合带模型，并对其材料及结构提出了基本假设，在此基础上采用理论公式法求解了复合带的弹性参数。建立了复合带在单向拉伸状态下的有限元模型，对玻纤与PE进行了位移耦合处理，求得了复合带沿玻纤长度方向的弹性模量，该结果与理论结果吻合很好。通过拉伸实验获得了复合带玻纤长度方向与带宽方向的弹性模量，带宽方向的弹性模量与理论结果吻合；而在玻纤长度方向上，由于加工工艺、材料状态等与假设条件之间的偏差，以及实验测试过程中存在的误差，其弹性模量与理论解、数值解相比偏低。
To study the elastic properties of continuous glass fiber /PE reinforced composite belt, a model was established, and the foundamental assumption of their materials and structure was proposed. The elastic parameters of the composite belt were solved based on the theoretical formula method. The finite element model of the composite belt under the uniaxial tensile state was established. The displacement coupling of the glass fiber and PE was performed. The elastic modulus of the composite belt along the length direction of the fiber was calculated. The calculation results agree well with the theoretical results. The elastic moduli of the composite belt along both the length and bandwidth directions of glass fiber were obtained by tensile test. The elastic modulus of the composite belt along the bandwidth direction agree well with the theoretical results. The elastic modulus of the composite belt along the length direction is smaller than the theoretical and numerical solutions, because of the difference in the processing technique and the material state between the assumption conditions and the actual conditions, and the errors during the experimental testing process.
参考文献
| [1] | 何建明;王选伦;李又兵;杨文青;尹皓.长玻纤增强聚丙烯复合材料力学性能的研究[J].橡塑技术与装备,2014(24):29-31. |
| [2] | 沈尔明;王志宏;滕佰秋;李晓欣.连续纤维增强复合材料在民用航空发动机上的应用[J].航空发动机,2013(2):90-94. |
| [3] | 张越;樊新民;孔德仁.复合层合管力学模型的研究[J].南京理工大学学报（自然科学版）,1999(5):446-449. |
| [4] | 张兴邦 .连续玻璃纤维增强PE复合带的研制[D].山东科技大学,2015. |
| [5] | 张如良;刘赟;黄玉东;刘丽;郎咸忠.碳纤维复合材料界面反应动力学分析[J].哈尔滨工业大学学报,2013(10):69-74. |
| [6] | 方立 .连续纤维增强热塑性复合材料制备及其性能的研究[D].华东理工大学,2012. |
| [7] | Liu, Dong;Zhu, Yingdan;Ding, Jiangping;Lin, Xinyao;Fan, Xinyu.Experimental investigation of carbon fiber reinforced poly(phenylene sulfide) composites prepared using a double-belt press[J].Composites, Part B. Engineering,2015Aug.(Aug.):363-370. |
| [8] | 南建举;邓丽莉;于俊荣;胡祖明;陈蕾;诸静.HDPE基芳纶增强复合带的制备[J].高科技纤维与应用,2010(5):32-36. |
| [9] | 郑津洋;陈德福;邵泰清;林秀锋;卢玉斌;李翔;朱彦聪;孙国有;徐平;许跃敏;董华章.钢丝缠绕增强塑料复合管的应力分析[J].中国塑料,2006(7):56-61. |
| [10] | 付敏;林松;陈亮;周文龙.纤维缠绕复合材料气瓶内衬的屈曲分析[J].材料科学与工艺,2015(2):86-90. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%