基于分形理论,建立了Al2O3凝聚态夹杂物分形碰撞凝聚长大新数学模型,并利用Fluent软件将此新数学模型应用于某钢铁公司冶炼铝镇静钢的中间包中,从夹杂物的分布特征角度比较了新数学模型与传统等体积球状数学模型的差异.结果表明:与传统等体积球状数学模型相比,Al2O3凝聚态夹杂物分形碰撞凝聚长大新数学模型的计算结果数值较大,且夹杂物粒子分布特征复杂;新数学模型显示出了夹杂物粒子容易在出水口和入水口富集的特征,这与实际生产中Al2O3夹杂物容易堵塞水口现象一致;实际生产中很难找到球形A12O3夹杂物,大多是簇群状形貌夹杂物,分形维数在1.78～1.85,表明Al2O3夹杂物分形碰撞凝聚长大新数学模型具有一定的现实意义.
参考文献
| [1] | Nakanishi K,Szekely J .Deoxidation kinetics in a turbulent flow field[J].Transactions of the Iron and Steel Institute of Japan,1975,15(10):522.,1975. |
| [2] | Higashitani K,Yamaguchi K,Matsuno Y .Turbulent coagulation of particles dispersed in a viscous fluid[J].Journal of Chemical Engineering of Japan,1983,16(4):299.,1983. |
| [3] | Visser J .On Hamaker constants:a comparison between Hamaker constants and Lifshitz-van der Waals constants[J].Advances in Colloid and Interface Science,1972,3(4):331.,1972. |
| [4] | Taniguchi S,Kikuchi A,Shoji N .Model experiment on the coagulation of inclusion particles in liquid steel[J].ISIJ International,1996,36:117.,1996. |
| [5] | Osbomelee I W.Calculation of Hamaker coefficients for metallic aerosols from extensive optical data:particles on surface 1[C]//MITTAL K Led.,New York and London:Plenum Press,1988:77.,1988. |
| [6] | Maki Y,Shimada Y,Thomas B G .Model of inclusion removal during RH degassing of steel[J].Iron and Steelmaker,1997,24(8):31.,1997. |
| [7] | Hirokazu T,Yoshiei K,Kenichi S .Agglomeration and flotation of alumina clusters in molten steel[J].ISIJ International,1999,39(5):426.,1999. |
| [8] | Zhang 1 F,Taniguchi S,Cai K K.Fluid flow and inclusion removal in continuous casting tundish[J].Metallurgical and Materials Transaction B,2000(31 B):253.,2000. |
| [9] | Smoluchowski V M .Mathematical theory of the kinetics of the coagulation of colloidal particle[J].Physical Chemistry Chemical Physics,1917,127(92):155.,1917. |
| [10] | Nakaoka T,Taniguchi S,Matsumoto K .Particle-size-grouping method of inclusion agglomeration and its application to water model experiments[J].ISIJ International,2001,41(10):1103.,2001. |
| [11] | Shirabe K,Szekely J .A mathematical model of fluid flow and inclusion coalescence in the RH vacuum degassing system[J].Transactions of the Iron and Steel Institute of Japan,1983,23(6):465.,1983. |
| [12] | Sinha A K,Sahai Y .Mathematical modeling of inclusion transport and removal in continuous casting tundishes[J].ISIJ International,1993,33(5):556.,1993. |
| [13] | 郭洛方,李宏,王耀.钢中夹杂物形貌特征的定量描述方法及其与上浮速度的关系[J].冶金分析,2012(09):1-6. |
| [14] | 郭洛方.应用分形理论模拟钢中夹杂物形貌特征及凝聚规律研究[D]∥北京:北京科技大学,2013.,2013. |
| [15] | 郭洛方,李宏,王耀,李永卿.Al_2O_3夹杂物在钢-渣界面处的运动特性及去除率[J].钢铁,2012(04):23-27. |
| [16] | Higashitani K,Yamaguchi K,Matsuno Y .Turbulent coagulation of particles dispersed in a viscous fluid[J].Journal of Chemical Engineering of Japan,1983,16(4):299.,1983. |
| [17] | Taniguchi S,Kikuchi A,Shoji N .Model experiment on the coagulation of inclusion particles in liquid steel[J].ISIJ International,1996,36:117.,1996. |
| [18] | Yang W,Wang X H,Zhang L F .Cleanliness of low carbon aluminum-killed steels during secondary refining processes[J].Steel Research,2013,84(5):473.,2013. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%