实现厚规格精冲带钢的顺利卷取是精冲钢冷连轧生产工艺成功应用的关键。利用4辊可逆冷轧机进行轧制试验，在M M S‐200热模拟试验机上测定精冲钢的应力‐应变曲线，建立精冲钢冷轧终态变形抗力模型。针对1750 m m冷连轧机组配置的卡罗塞尔卷取机，进行精冲带钢卷取过程的机理分析和卷取状态的受力分析，为精冲钢冷连轧极限厚度卷取能力的分析和计算提供理论支撑。在此基础上，完成了不同摩擦条件下多规格精冲钢冷连轧生产卷取机的极限厚度计算，并给出相应的安全卷取厚度窗口。该研究适合于工业生产实践，对精冲钢冷连轧生产工艺研究具有重要意义。
The realization of coiling of heavy fine blanked strip steels is the key point for implementing tandem cold rolling technology of fine blanked steels successfully .In order to establish the model of deformation resistance for cold rolled fine blanked steels ,cold rolling of fine blanked strip steels was studied in the laboratory through cold four‐high reversible mill .Meanwhile ,stress‐strain curves of fine blanked steels were gained with MMS‐200 thermo‐mechanical simulator .Contraposing the carrousel coiler configured for 1750mm tandem cold rolling mills ,mecha‐nism analysis of the coiling process and mechanics analysis of the state of coiling for fine blanked strip steels were conducted in‐depth to provide theoretical support for analysis and calculation on coiling capacity of limit thickness in tandem cold rolling of fine blanked steels .On this basis ,the limited thickness of coiler in tandem cold rolling of fine blanked steels with multiple sizes was computed under the condition of different friction ,and then the corresponding thickness window of safety coiling was also presented .The present work is significant to the research on production process of fine blanked steels in tandem cold rolling ,which can be put into practical production .
参考文献
| [1] | XIE H B;JIANG Z Y;LIU X H et al.Prediction of coiling temperature on run-out table of hot strip mill using data min-ing[J].Journal of Materials Processing Technology,2006,177(1/2/3):121. |
| [2] | Jung Y J;Lee G T;Kang C G.Coupled thermal deformation analysis considering strip tension and with/without strip crown in coiling process of cold rolled strip[J].Journal of Materials Processing Technology,2002(130/131):195. |
| [3] | 汪磊川;程灿军;彭向雨.改善带钢卷取质量的措施[J].冶金设备,2012(195):161. |
| [4] | WANG Y Q;LI L;YAN X C et al.Modeling of stress dis-tribution during strip coiling process[J].Journal of Iron and Steel Research,Internetional,2012,19(8):6. |
| [5] | 雷金波,陈进,李毅.基于卷曲能的卷曲机实时状态监测系统[J].仪表技术与传感器,2007(07):38-39,45. |
| [6] | 王艳丽,李小谦.铝带冷轧机组卷取机卷筒主要参数计算及分析[J].有色金属加工,2011(03):36-38. |
| [7] | 白卫卫,史锡强.卷取机卷筒的静态应力变形分析[J].机械研究与应用,2007(06):17,20. |
| [8] | WANG Z D;GUO Y H;SUN D Q et al.Texture compari-son of an ordinary IF steel and a high-strength IF steel under ferritic rolling and high-temperature coiling[J].Materials Characterization,2006,57(4/5):402. |
| [9] | SHA Q Y;LI G Y;QIAO L F et al.Effect of cooling rate and coiling temperature on precipitate in ferrite of a Nb-V-Ti micro-alloyed strip steel[J].Journal of Iron and Steel Re-search,International,2007,14(5):316. |
| [10] | 方立志.本钢厚规格X70管线钢热轧板卷的生产试验[J].冶金丛刊,2012(05):20-22. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%