欢迎登录材料期刊网

材料期刊网

高级检索

以天然鳞片石墨为起始原料,SiC颗粒为增强相,采用热压烧结工艺制备了SiC增强石墨复合材料.研究了SiC含量对SiC增强石墨复合材料微观结构、力学性能和摩擦性能的影响.结果表明:SiC颗粒均匀分布在石墨基体中,降低了基体中的孔隙率;随着SiC含量增加,SiC增强石墨复合材料的相对密度和弯曲强度相应增加,开孔率显著降低,当SiC含量达到40vol%时,SiC增强石墨复合材料中形成了SiC网络骨架结构,相对密度达到了94.2%,比商品高强纯石墨材料提高了11.8%,弯曲强度达到了146 MPa,比商品高强纯石墨材料提高了147%;基体石墨保持了层状结构;SiC含量低于40vol%时,SiC增强石墨复合材料的摩擦系数随SiC含量的增加轻微增加,与纯石墨材料的摩擦系数相当,具有良好的摩擦性能.

参考文献

[1] Moraru V;Lebovka N;Shevchenko D.Structural transitions in aqueous suspensions of natural graphite[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,20041/3(1/3):181-187.
[2] Effects of Ni substitution on the properties of Co_3O_4/graphite composites as anode of lithium ion batteries[J].Energy conversion & management,20102(2):247.
[3] Minghua Wang;Kee-do Woo;Dong-Keon Kim;Taiping Lou;Zhenqi Huang.Study on impregnation of polytetrafluoroethylene in graphite for use as fuel cell collector[J].International journal of hydrogen energy,20059(9):1027-1030.
[4] Marco E. Siegrist;Esther D. Amstad;Jorj F. Loffler.Tribological properties of graphite- and ZrC-reinforced bulk metallic glass composites[J].Intermetallics,20079(9):1228-1236.
[5] 陈伟;颜正国;于景坤.B2 O3 对沥青焦石墨化影响的研究[J].材料与冶金学报,2007(2):158-160.
[6] Zhan Jun Liu;Quan Gui Guo;Jin Ren Song.Effect of Ti dopant on shrinkage and performance of MCMB-derived carbon laminations[J].Carbon: An International Journal Sponsored by the American Carbon Society,20071(1):146-151.
[7] Elena Markevich;Elad Pollak;Gregory Salitra;Doron Aurbach.On the performance of graphitized meso carbon microbeads (MCMB)-meso carbon fibers (MCF) and synthetic graphite electrodes at elevated temperatures[J].Journal of Power Sources,20072(2):1263-1269.
[8] 葛毅成;易茂中;黄伯云.C/C复合材料与石墨材料干态摩擦磨损行为[J].复合材料学报,2004(6):93-97.
[9] 朱振国;陈杰;徐红军;白朔;李汀;任勇;杜海峰;吴峻峰.表面状态对浸树脂石墨复合材料密封性能的影响[J].炭素技术,2013(2):23-25.
[10] 胡亚非;刘颀;蒋文武;王启立.3种浸锑石墨材料的摩擦磨损性能实验研究[J].煤炭学报,2011(2):351-354.
[11] 周序科;徐红军;巴力学;佟明欣;张克信;冯子文.浸银石墨电刷的显微组织结构与摩擦磨损的研究[J].新型炭材料,2000(1):28-34.
[12] 胡亚非;王启立;刘颀;熊建军.石墨密封材料润滑膜形成规律及摩擦磨损研究[J].中国矿业大学学报,2010(2):223-226.
[13] Xiaomeng Fan;Xiaowei Yin;Shanshan He;Litong Zhang;Laifei Cheng.Friction and wear behaviors of C/C-SiC composites containing Ti_3SiC_2[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2012:188-195.
[14] Y. H. Zhang;Z. C. Xiao;J. P. Wang;R. P. Xing;Z. G. Peng;J. M. Su;Z. H. Jin.Effect of pyrocarbon content on thermal and frictional properties in C/C preforms of C/C-SiC composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,20101/2(1/2):132-138.
[15] 马雯;刘福顺.玻璃纤维复合材料孔隙率对超声衰减系数及力学性能的影响[J].复合材料学报,2012(5):69-75.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%