采用试验和有限元方法研究了复合材料含翼肋单加筋板试验件的压缩性能,试验件包括带有长桁-翼肋连接和不含长桁-翼肋连接2种类型.试验和数值计算研究结果表明:与不含长桁-翼肋连接的试验件相比,带有长桁-翼肋连接的试验件具有较高的刚度和较高的临界屈曲失稳载荷,在后屈曲承载过程中具有较小的形变和较小的最终破坏载荷.试验件的最终破坏模式总是长桁与蒙皮间的界面脱粘,这表明长桁-翼肋连接对加筋板试验件的最终破坏模式无影响.在复合材料翼面结构设计中,需要综合考虑长桁-翼肋连接对加筋板初始临界失稳载荷、后屈曲变形和结构承载能力等方面的影响.
参考文献
| [1] | Pedro B. Dinis;Dinar Camotim.Post-buckling behaviour and strength of cold-formed steel lipped channel columns experiencing distortional/global interaction[J].Computers & structures,20113/4(3/4):422-434. |
| [2] | B. G. Falzon;K. A. Stevens;G. O. Davies.Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression[J].Composites, Part A. Applied science and manufacturing,20005(5):459-468. |
| [3] | 孔斌;叶强报;陈普会;柴亚南.复合材料整体加筋板轴压后屈曲的传载机制[J].复合材料学报,2010(5):142-149. |
| [4] | 刘从玉;许希武;陈康.考虑脱粘的复合材料加筋板屈曲后屈曲及承载能力数值分析[J].复合材料学报,2010(6):158-166. |
| [5] | A.C. Orifici;R.S. Thomson;R. Degenhardt;A. Kling;K. Rohwer;J. Bayandor.Degradation investigation in a postbuckling composite stiffened fuselage panel[J].Composite structures,20082(2):217-224. |
| [6] | A.C. Orifici;R.S. Thomson;I. Herszberg;T. Weller;R. Degenhardt;J. Bayandor.An analysis methodology for failure in postbuckling skin-stiffener interfaces[J].Composite structures,20081/3(1/3):186-193. |
| [7] | Adrian C. Orifici;Inigo Ortiz de Zarate Alberdi;Rodney S. Thomson;Javid Bayandor.Compression And Post-buckling Damage Growth And Collapse Analysis Of Flat Composite Stiffened Panels[J].Composites science and technology,200815/16(15/16):3150-3160. |
| [8] | A. Turon;C.G. Davila;P.P. Camanho.An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models[J].Engineering Fracture Mechanics,200710(10):1665-1682. |
| [9] | R. Degenhardt;A. Kling;K. Rohwer;A.C. Orifici;R.S. Thomson.Design and analysis of stiffened composite panels including post-buckling and collapse[J].Computers & structures,20089(9):919-929. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%