引入微分概念和复合材料铺层刚度分配原则,形成一种改进的求解复合材料斜面对接结构胶层应力的半解析方法MAM(Modified semi-Analytical Method).首先,针对铺层角度及铺层数不一致的情况,采用有限元法(FEM)平面应变模型对MAM进行验证;然后,分别用平均剪应力法、FEM及MAM预测了复合材料斜接结构的承载能力并与试验值进行对比;最后,利用MAM分析工程应用问题,考虑了被粘结体刚度不匹配及胶层厚度的变化.研究结果表明:MAM适于设计复合材料斜接结构;采用MAM能得到胶层应力的尖峰值,且应力分布与FEM计算一致.
参考文献
| [1] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12. |
| [2] | Alex B. Harman;Chun H. Wang.Improved design methods for scarf repairs to highly strained composite aircraft structure[J].Composite structures,20061/4(1/4):132-144. |
| [3] | Andrew J. Gunnion;Israel Herszberg.Parametric study of scarf joints in composite structures[J].Composite structures,20061/4(1/4):364-376. |
| [4] | A.M.G. Pinto;R.D.S.G. Campilho;M.F.S.F. de Moura.Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures[J].International Journal of Adhesion & Adhesives,20105(5):329-337. |
| [5] | On the design methodology of scarf repairs to composite laminates[J].Composites science and technology,20081(1):p.35. |
| [6] | T.D. Breitzman;E.V. Iarve;B.M. Cook.Optimization of a composite scarf repair patch under tensile loading[J].Composites, Part A. Applied science and manufacturing,200912(12):1921-1930. |
| [7] | Chun H. Wang;Andrew J. Gunnion.Optimum shapes of scarf repairs[J].Composites, Part A. Applied science and manufacturing,20099(9):1407-1418. |
| [8] | Cheng Xiaoquan;Yasir Baig;Hu Renwei.Study of tensile failure mechanisms in scarf repaired CFRP laminates[J].International Journal of Adhesion & Adhesives,2013:177-185. |
| [9] | 关志东;刘遂;郭霞;席国芬;蔡婧.含半穿透损伤层合板挖补修理后的拉伸性能[J].复合材料学报,2013(2):144-151. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%