针对碳纤维/环氧树脂预浸料,对比了直接在树脂中加入碳纳米管(CNTs)后制备预浸料以及将CNTs喷涂在预浸料表面2种CNTs加入方式对CNTs-碳纤维/环氧树脂复合材料层合板Ⅰ型与Ⅱ型层间断裂韧性及层间剪切强度的影响.通过对树脂黏度、固化反应以及玻璃化转变温度的考察,分析了CNTs含量对树脂性能的影响,考察了添加方法对CNTs长度与形态的影响.分析了2种CNTs加入方式对CNTs-碳纤维/环氧树脂层合板断裂韧性及层间剪切强度的改善效果与作用规律.结果表明:CNTs的加入使树脂的黏度提高,固化反应程度下降;2种分散方法对CNTs的长度与形态无明显影响;直接在树脂中加入CNTs对CNTs-碳纤维/环氧树脂复合材料Ⅰ型与Ⅱ型层间断裂韧性的提高效果低于在碳纤维/环氧树脂预浸料表面喷涂CNTs的方式,后者的CNTs利用率较高;由于CNTs团聚及对树脂固化反应的影响,CNTs含量过高会使得其对CNTs-碳纤维/环氧树脂层合板的增韧效果下降.
参考文献
[1] | Joshi, S.C.;Dikshit, V..Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion[J].Journal of Composite Materials,20126(6):665-675. |
[2] | G. Lubineau;A. Rdhaman.A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements[J].Carbon: An International Journal Sponsored by the American Carbon Society,20127(7):2377-2395. |
[3] | Veedu VP;Cao AY;Li XS;Ma KG;Soldano C;Kar S;Ajayan PM;Ghasemi-Nejhad MN.Multifunctional composites using reinforced laminae with carbon-nanotube forests[J].Nature materials,20066(6):457-462. |
[4] | Ivana K. Partridge;Denis D.R. Cartie.Delamination resistant laminates by Z-Fiber~R pinning: Part I manufacture and fracture performance[J].Composites, Part A. Applied science and manufacturing,20051(1):55-64. |
[5] | X. Zhang;L. Hounslow;M. Grassi.Improvement of low-velocity Impact and compression-after-impact performance by z-fibre pinning[J].Composites science and technology,200615(15):2785-2794. |
[6] | The Effects Of Carbon Nanotubes On Mechanical And Thermal Properties Of Woven Glass Fibre Reinforced Polyamide-6 Nanocomposites[J].Composites science and technology,20092(2):p.239. |
[7] | Lars Boger;Jan Sumfleth;Hannes Hedemann;Karl Schulte.Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy[J].Composites, Part A. Applied science and manufacturing,201010(10):1419-1424. |
[8] | Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes[J].Composites science and technology,20104(4):553. |
[9] | 朱莉莉;顾轶卓;孙志杰;李敏;张佐光.分散方法对低含量碳纳米管玻纤/环氧层板性能的影响[J].复合材料学报,2012(5):11-17. |
[10] | 赵艳文;顾轶卓;李敏;张佐光.碳纳米管-玻璃纤维/环氧层板双真空灌注工艺及性能[J].复合材料学报,2011(3):13-19. |
[11] | Behnam Ashrafi;Jingwen Guan;Vahid Mirjalili;Yunfa Zhang;Li Chun;Pascal Hubert;Benoit Simard;Christopher T. Kingston;Orson Bourne;Andrew Johnston.Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes[J].Composites science and technology,201113(13):1569-1578. |
[12] | E. T. Thostenson;W. Z. Li;D. Z. Wang;Z. F. Ren;T. W. Chou.Carbon nanotube/carbon fiber hybrid multiscale composites[J].Journal of Applied Physics,20029(9):6034-6037. |
[13] | Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix[J].Composites science and technology,20097/8(7/8):898-904. |
[14] | Abdelghani Laachachi;Alexandre Vivet;Gerard Nouet;Bessem Ben Doudou;Christophe Poilane;Jun Chen;Jin Bo bai;M'Hamed Ayachi.A chemical method to graft carbon nanotubes onto a carbon fiber[J].Materials Letters,20083(3):394-397. |
[15] | Khaled Almuhammadi;Marco Alfano;Yang Yang;Gilles Lubineau.Analysis of interlaminar fracture toughness and damage mechanisms in composite laminates reinforced with sprayed multi-walled carbon nanotubes[J].Materials & design,2014Jan.(Jan.):921-927. |
[16] | Faustino Mujika;Gustavo Vargas;Julen Ibarretxe;Juan De Gracia;Ainhoa Arrese.Influence of the modification with MWCNT on the interlaminar fracture properties of long carbon fiber composites[J].Composites, Part B. Engineering,20123(3):1336-1340. |
[17] | John Williams;Neil Graddage;Sameer Rahatekar.Effects of plasma modified carbon nanotube interlaminar coating on crack propagation in glass epoxy composites[J].Composites, Part A. Applied science and manufacturing,2013:173-181. |
[18] | He, Z.;Zhang, X.;Chen, M.;Li, M.;Gu, Y.;Zhang, Z.;Li, Q..Effect of the filler structure of carbon nanomaterials on the electrical, thermal, and rheological properties of epoxy composites[J].Journal of Applied Polymer Science,20136(6):3366-3372. |
[19] | 王安之;陈龙;侯薇;兰延勋;吕满庚.碳纳米管对环氧树脂固化反应和力学性能的影响[J].高分子材料科学与工程,2007(2):157-160. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%