欢迎登录材料期刊网

材料期刊网

高级检索

为提高ZrO2基复合材料硬度,采用热压烧结法制备了TiC0.7N0.3/ZrO2复合材料,并研究了TiC0.7N0.3颗粒增强相对复合材料的物相组成、微观结构和力学性能的影响.结果表明:TiC0.7N0.3的添加具有稳定四方相ZrO2(t-ZrO2)的作用,能增加TiC0.7N0.3/ZrO2复合材料中t-ZrO2的含量,提高断裂韧性.随着热压烧结温度的升高和TiC0.7N0.3含量的增加,复合材料的硬度升高.1 400℃下热压烧结时,TiC0.7N0.3发生部分分解,分解的N与被还原的ZrO2反应生成ZrN,提高了复合材料的硬度.1 400℃下热压烧结后的35wt% TiC07N0.3/ZrO2复合材料的相对密度达99.9%,维氏硬度达17 GPa.而1 300℃下热压烧结后,复合材料断裂韧性较高,为6.48 MPa·m1/2.研究结果为TiC0.7N0.3/ZrO2复合材料的组织控制及性能改进提供了参考.

参考文献

[1] Xinghong Zhang;Rubing Zhang;Guiqing Chen;Wenbo Han.Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,20081/2(1/2):195-199.
[2] Igor Danilenko;Fedor Glazunov;Tetyana Konstantinova.Effect of oxide nanofillers on fabrication, structure, and properties of zirconia-based composites[J].Journal of the European Ceramic Society,201312(12):2321-2325.
[3] G. ANNE;S. PUT;K. VANMEENSEL.Hard, tough and strong ZrO_2-WC composites from nanosized powders[J].Journal of the European Ceramic Society,20051(1):55-63.
[4] Chih-Wei Kuo;Yun-Hwei Shen;Feng-Lin Yen.Phase transformation behavior of 3 mol% yttria partially-stabilized ZrO_2(3Y-PSZ) precursor powder by an isothermal method[J].CERAMICS INTERNATIONAL,20142(2):3243-3251.
[5] 裴杨;朱世根;瞿海霞.WC-40%Al2O3复合粉末二步热压烧结[J].复合材料学报,2013(6):127-134.
[6] 陈德勇;黎俊初;闵嗣林;杨刚.ZrO2-Al2O3两相陶瓷复合材料力学性能与增韧机制的研究[J].南昌航空工业学院学报(自然科学版),2005(1):45-48.
[7] B. Basu;J. Vleugels;O. Van Der Biest.Development of ZrO_2-ZrB_2 composites[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20021/2(1/2):200-204.
[8] C. Santos;L.D. Maeda;C.A.A. Cairo.Mechanical properties of hot-pressed ZrO_2-NbC ceramic composites[J].International Journal of Refractory Metals & Hard Materials,20081(1):14-18.
[9] N. Unal;F. Kern;M.L. Ovecoglu.Influence of WC particles on the microstructural and mechanical properties of 3 mol% Y_2O_3 stabilized ZrO_2 matrix composites produced by hot pressing[J].Journal of the European Ceramic Society,201113(13):2267-2275.
[10] S. SALEHI;O. VAN DER BIEST;J. VLEUGELS.Electrically conductive ZrO_2-TiN composites[J].Journal of the European Ceramic Society,200615(15):3173-3179.
[11] K. Bonny;P. De Baets;J. Vleugels;A. Salehi;B. Lauwers;W. Liu.Reciprocative sliding wear of ZrO{sub}2-TiCN composites against WC-Co cemented carbide[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,200811/12(11/12):1767-1775.
[12] C.Z. Huang;L. Zhang;L. He.A study on the development of a composite ceramic tool ZrO_2/(W, Ti)C and its cutting performance[J].Journal of Materials Processing Technology,20021/3(1/3):349-353.
[13] J.Vleugels;O.V.D.Biest.Development and characterization of Y2O3-stabilized ZrO2(Y-TZP) composites with TiB2,TiN,TiC, and TiC0.5N0.5[J].Journal of the American Ceramic Society,199910(10):2717-2720.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%