利用自行设计的浸渍模具,通过拉挤熔融浸渍工艺,定量考察了牵引速度、熔体温度和浸渍辊个数等工艺参数对连续玻璃纤维增强热塑性复合材料复合过程中纤维断裂的影响,旨在通过所建立的纤维断裂数学模型,预测预浸料生产过程中纤维断裂率并描述实验结果.结果表明:模型与实验数据吻合较好,能够为工业化生产提供指导与借鉴;纤维束在模具中拖曳而产生的黏性剪切作用是影响纤维断裂的主要因素,适当减少浸渍辊数及采用低黏度树脂能够显著降低纤维断裂,提高工艺稳定性.
参考文献
| [1] | 邢丽英;蒋诗才;周正刚.先进树脂基复合材料制造技术进展[J].复合材料学报,2013(2):1-9. |
| [2] | 方立;周晓东.连续玻璃纤维增强聚丙烯拉挤棒材的性能稳定性[J].玻璃钢/复合材料,2013(8):77-80. |
| [3] | BATES P.J..Pulling Tension Monitoring During the Melt Impregnation of Glass Roving[J].Polymer Composites,20001(1):104-113. |
| [4] | 杜善义.先进复合材料与航空航天[J].复合材料学报,2007(01):1-12. |
| [5] | Gurvich MR.;Pegoretti A.;Dibenedetto AT..EVALUATION OF THE STATISTICAL PARAMETERS OF A WEIBULL DISTRIBUTION[J].Journal of Materials Science,199714(14):3711-3716. |
| [6] | Deepak Srinivasagupta;Sairam Potaraju;John L. Kardos.Steady state and dynamic analysis of a bench-scale injected pultrusion process[J].Composites, Part A. Applied science and manufacturing,20039(9):835-846. |
| [7] | Analysis of pulling force during pultrusion process of phenolic foam composites[J].Composites science and technology,20081(1):p.140. |
| [8] | Audrey Durin;Pascal De Micheli;Julien Ville.A matricial approach of fibre breakage in twin-screw extrusion of glass fibres reinforced thermoplastics[J].Composites, Part A. Applied science and manufacturing,2013:47-56. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%